Well my thoughts for the 'new just broken F23 Gb bios crap' is this

XMP i know wich settings it has standard (on F23 its a fake collection of numbers NOT read from XMP ... its a 'gb' or 'amd' solution)

Sleep well dont put the system into sleepmode windows(whatever version) or linux , even at plain standard (auto settings 'gb') it just goes 8 of 10
into the famous triple beep and it reboots (hence byebye running/slumber session)

Then try to set Vsoc on 1.03 volt (1,02500 volt its floating 1,0008~1,0200) after reboot it sets on 1.1 volt (F10 till F23f had same issue)

due to pumpfans stuck at 800rpm i had to go back to F7b where the sys_fan_pump headers temp scale work flawless ??? (really 'gb' did it the good old "thats the right way" )
seems all other version have the oops 1 degree raise so lets do a 400rpm xtra , wich is annoying on a silent pc for www and household tasks
Or the setting for fan5 or fan6 just wont stick ? , else 1 does temp related up/down -+700rpm , the other goes haywire with result 1500rpm or more

Nah its now 18 months of zen , but 'gb' has not seen a enlightened path

hi just updated to your new bios and very good job there i found it works very well ,but its down clocked cpu from 3900 to 3850 -3800 and led code has changed from 24 to 33 i am using 2600 not overclocked

Modded F23 will take a bit longer than planned as I can't port over string tables to F23, looks like a specific change GB have implemented to deterre modders. Apparently they REALLY don't like us (probably specifically me) fixing up their terrible firmware. I could do with someone getting screen captures from the stock F23 then linking me to them in an archive so I can see which options are exposed and which aren't. EDIT: If someone can test HPET with F23 that would be good too don't want a repeat of last time where GB managed to break HPET.

hello ket, just install your bios f22b on my k7 (no problem for flashing.....thanks :)
but, I don't find cldo-cddp setting in.
normal ?
thanks

nb : with GDM disable with ram@3266 : boot, but bios freeze.....
must enable to work properly.

nb2 : thanks to you for this bios. will test this now. :)

so, try your last F23f mod bios but no cldo_vddp too.

and think i find a problem.

look at this screen :





bad cad strenght and procodt.....don't know if the value I enter in the bios is really used.

?? :(

find another problem in your f23f
if i enter vsoc 1.04375, it's ok, i've got +/- this in windows
but if I enter 1.05 in bios, i've got 1.08-1.09 in windows

@floyd

When i put 1.02500 for Vsoc its 1.0200 when i add a notch up 1.031250 its after save/restart 1.1V in bios in windows or linux its 1.2~1.3 , same happens in the last release F23
After F10 and its 'gb' miracles i stopped updateting till F23f from ket

And try this Ryzen DRAM Calculator 1.3.1 for the Cad_Bus_Block normaly u should stay between 20-24


@Ket

Got the bios F23 screenies here "https://ufile.io/u70gn"

PS what was the Hpet error back then , vaguely remeber if on the bios would go bonkers
it seems working now tho got it on and only some pieces of of the gearbox came out ;)

ok for vsoc, so you've got the same problem from f23f from ket ?

Yes if i put 1.02500 it ranges from 1.0200~1.0320 according to Hwinfo in bios its 1.0008~1.0200 with llc on 'high for vsoc
Same as F23

Zitat von Gigawits im Beitrag #817

---

@floyd

When i put 1.02500 for Vsoc its 1.0200 when i add a notch up 1.031250 its after save/restart 1.1V in bios in windows or linux its 1.2~1.3 , same happens in the last release F23
After F10 and its 'gb' miracles i stopped updateting till F23f from ket

And try this Ryzen DRAM Calculator 1.3.1 for the Cad_Bus_Block normaly u should stay between 20-24


@Ket

Got the bios F23 screenies here "https://ufile.io/u70gn"

PS what was the Hpet error back then , vaguely remeber if on the bios would go bonkers
it seems working now tho got it on and only some pieces of of the gearbox came out ;)

---

Zitat von Floyd im Beitrag #815

---

so, try your last F23f mod bios but no cldo_vddp too.

and think i find a problem.

look at this screen :





bad cad strenght and procodt.....don't know if the value I enter in the bios is really used.

?? :(

---

Zitat von Floyd im Beitrag #816

---

find another problem in your f23f
if i enter vsoc 1.04375, it's ok, i've got +/- this in windows
but if I enter 1.05 in bios, i've got 1.08-1.09 in windows

---

ok.
so which values is right for strength ?
bios or RTC ?

because 120 ohms is very big on auto compare to ryzen dram calculator

thanks :)

Zitat von Floyd im Beitrag #821

---

ok.
so which values is right for strength ?
bios or RTC ?

because 120 ohms is very big on auto compare to ryzen dram calculator

thanks :)

---

ok :)
in all case, your bios is better yhan gigabyte.
with gigabyte bios > F10, i couldn't boot more than 3000 on the ram
with your f23f, i'm @ 3280 ;)
thanks a lot

what is latest GA-AX370-Gaming-5 bios? ;)

or better: when will F23 with 1.0.0.4 be ready?

X370 Gaming 5 F23fM-D is still 1.0.0.2

Zitat von ket im Beitrag #820

---

[quote=Gigawits|p58068]@floyd

When i put 1.02500 for Vsoc its 1.0200 when i add a notch up 1.031250 its after save/restart 1.1V in bios in windows or linux its 1.2~1.3 , same happens in the last release F23
After F10 and its 'gb' miracles i stopped updateting till F23f from ket

And try this Ryzen DRAM Calculator 1.3.1 for the Cad_Bus_Block normaly u should stay between 20-24


@Ket

Got the bios F23 screenies here "https://ufile.io/u70gn"

PS what was the Hpet error back then , vaguely remeber if on the bios would go bonkers
it seems working now tho got it on and only some pieces of of the gearbox came out ;)


Cheers for that, will get back to modding the firmware later today hopefully. HPET issue was that with it disabled the board entered an infinite reboot loop after the first boot to windows requiring HPET to be set back to "Enabled".

---