Thanks for posting that server, it's a gold mine, wanted to get one of the old Haswell all core turbo bios that are not available anymore on the gigabyte site

Just sell it! in the end you will free your self from headaches with this very poor motherboard, no amount of bios tweaking is going to make this board any better its just a crock of shit with physical hardware faults in the soundcard and power delivery. if you bought it from amazon just return it they will give you your money back.

Zitat von Khaela im Beitrag #390

---

http://download.gigabyte.cn/FileList/BIOS/?C=M;O=D

New updates...


Update AGESA 1.0.0.0a for new upcoming processors
Supports GPU overclockable on Raven Ridge processors

🤣😂🤣😂

---

For my ram corsair plx 3200 hynix, can't boot at 3200 like in the f10, in f9 work ok... i'll try in manual...
Pd. Nothingto do, drop mem to 3066 16 18 18 to stable. The cpu at 37.75 with 1.28 vol. The next week more...

Super weird on my taichi my corsair RGB rams at 3333MHz 16,14,12,12,1T @ 21.2 GB/s 59ns latency, memtest passed no issues. now 3333MHz is the sweet spot for ram on ryzen, you can clamp those sub timings right down for super performance. the board will boot and run at 3600 but its pointless. corsair ram should hit 3200 easy on any ryzen board, my rams XMP is 3466 and it runs perfect with its xmp, but i chose 3333MHz with much tighter timings the performance is actually better at 3333 than 3466 too, much better.

The new 4.40 UEFI Bios from asrock is unbelievable, the performance difference from v3.3 is just insane, on my stock cooler at 3.7GHz im getting 195 GFlops in intel burn test, so on water it will crack the 200 mark easy. my gaming 5 hit a wall at 188GFlops and the ram ran much slower at the same clock speeds, and it does all this with 7c lower temps, go figure.

make sure your rams in slots A2 and B2 if you have 2 modules otherwise you can actually damage your cpu itself, why gigabyte didnt put a leaflet in the box stating this is boyond me, its common knowledge amongst am4 platforms, but even then dont expect miracles from this POS motherboard, my mrs works at pc world and theyve already took this joker board off the shelves because of all the complaints.

Also with v4.40 bios the pcie bus still runs at pcie 3.0 even when a BCLK overclock is used.

I could come up with a totally kickass firmware for the Taichi having a nose at its firmware with a few of my tools but Asrock are probably the only company I don't need to mod the firmware for because they are already doing a stellar job.

I thinking change the mobo. But I'll wait April or May to the x470 chipset. If work fine with Ryzen 1, and save the problems with memos. I know that I can't sold the gigabyte gaming 5 for more than 120 or 100 euros... I prefer forget it in the box. And the price of the memory is a madness. And don't want sold the corsair to spend 250 euros for a kit compatible, when I buy the hynix kit was in the qvl... very bad for amd.

I have a bad experience with asrock some years ago, the 970 extreme r3 and the vrm with a fx8950. And here in Spain the rma with Asus come two or three moths to wait without the component.

Maybe taste Biostar in amazon... I don't know. I must wait. I want too install hard tube in the loop, but if I'll change the mobo...

Not any more, asrock are the number1 brand for amd and intel. that said ive got an old asrock 478 motherboard here been running nearly daily for over 10 years not a single problem with it. i use it for DOS gaming, so that in itself is a testament to their build quality.

and my asrock am1h-itx motherboard for my amd AM1 cpu, has been bloody great as well, the best board for AM1 by a mile.

The memory compatibility issues arent anything to do with AMD, they are to do with the motherboard vendors who cant be arsed to fix any problems. ive tried 4 different brands of ram on the taichi g.skill rgb, corsair vengeance rgb, geil and samsung, and they all work 100% perfect, even from the first bios release so gigabyte are just passing the blame on amd because theyre morons.

If you want a trouble free experience as of now the ONLY 2 ryzen boards i can recommend are the msi titanium and the asrock taichi, no exceptions.

unless you are runing 2x1080ti's in sli i wouldnt bother with x470, or at least unless you buy a ryzen2 cpu to go with it.

Zitat von ket im Beitrag #396

---

I could come up with a totally kickass firmware for the Taichi having a nose at its firmware with a few of my tools but Asrock are probably the only company I don't need to mod the firmware for because they are already doing a stellar job.

---

New F21 bios released for gaming K7. Most motherboards received an update

https://www.gigabyte.com/Motherboard/GA-...v-10#support-dl

I'm going to wait for the next AGESA version before I make any modded firmware I've already seen MSI have outed a firmware with AGESA 1.1.0.1. The AGESA version other manufacturers are using I believe is just a beta and doesn't seem to do much either.

Hello =)
i hope i can post here my problem ..

i've a GA-AX370-Gaming 5 (rev. 1.0) with OEM-Bios =/
it's still Version F5 installed and i cant update to a newer Version - the manufacterer from the Complete-PC dont update the bios and there dont new bios-updates at the homepage..

i tried to use ami aptio V firmware utility to flash the oem .. but there still an error "46 - error problem getting flashing information"

is there any way to flash the oem to an original?

i hope anybody has an idea =/

I'd need a lot more information than that. Pictures of the board, a copy of the firmware the board is currently using along with any flashing tool you have been using. I might be able to work out an override with all of those things.

Ok .. i have a copy of the installed bios still saved.. can i contact you anywhere?

Im so happy that you try To help me

Just plonk everything on mega.nz then drop the link here and I'll take a look.