i just download bios f10 for k3 board,emotionnn!!!!!!

https://www.gigabyte.com/Motherboard/GA-...v-10#support-dl

Now is here rhe F10 bios with 1072 agesa...

This better work properly or this board will be on ebay first thing tomorrow morning.

Well as usual this BIOS is just as piss poor as the rest, one more feature to switch off the ethernet chip, what a waste of time, goodbye gigabyte hello asrock.

Jajajaja...

Zitat von POE_UK im Beitrag #243

---

This better work properly or this board will be on ebay first thing tomorrow morning.

---

i see a lot of new options on zen comon on peripherals but.....if you press alt the explanation is a shit.And of course i needed to set the timings again to make it work at 3200.How many years i go to need to see my hynix corsair lpx working with his xmp profile?

Here is the modded F10 for the Gaming 5 guys. Bare in mind that I'm not using the Gaming 5 atm so I can't verify this file which is why I'm not putting it in the first post until someone verifies its working. You can flash from Q-Flash as usual.

Gaming 5 F10 Mod

Ket you know what, i havent got the heart to get rid of this board. i know deep down its the best one but the damn software is hysterically poor. all the components on the board are of VERY good quality, unlike MSI with their terrible NIKOS mosfets

Every fault this board has is software related not hardware, so with that said it can be sorted. plus the fact i like the way it looks, its the best looking ax370 board out there atm.

Paketeman, you say zen options are showing on your machine? they arent here dammit. you mean p-states?

Ket the bios works fine, there are a ton of options under ZEN options that i have no clue about, but p-states is not there, everything else is spot on.

still cant get the ram any higher than 3333mhz though so it must be my 3200 G.Skill trident z not capable of going higher, although thinking about it it, i doubt that very much, its enthusiast memory.

mouse movement in the UEFI is MUCH smoother, so is keyboard browsing.

windows use is MUCH smoother, so all these options must have done something, everything feels snappier and very fluid.

CPU vcore voltages drop in windows at IDLE to 0.35v but clocks don't, and for some strange reason amd seem to think 1.35v is ok for stock frequencies!! 1.200v is plenty enough for stock on a ryzen 1700

I see you put that aorus logo in the bios, awsome

UPDATE 2

NOT WORKING

You cannot save any CPU changes, you have to reset the bios to defaults using the jumper, Otherwise pc will not boot at all, showing "od" on the LED readout

no in my k3 board no p-states aded but there are a ton of strange options.for now seems like works beter.It makes more try's on memory before reset.And now i can operate with 1T and not like before 2T.And im able to set the cpu to 4ghz and pass the userbenchmark test.Not tryed the cinebench for now.

Is my best score for now,in winter seems like i go to be able to hold this frequency's but on sumer i go to have the summer configuration with the stock cooler.

http://www.userbenchmark.com/UserRun/6194179

Thank you Guys ! Worked out Just fine :).

Just a question. Is there any chance that there will be a static CPU voltage Option other Then the disgusting Offset Option for The Gaming K5 ?

Hi ket,

Thank you for your work.
I don't find the option to disable the spread spectrum: what am I doing wrong?

Zitat von Spitfire im Beitrag #253

---

Hi ket,

Thank you for your work.
I don't find the option to disable the spread spectrum: what am I doing wrong?

---

Zitat von POE_UK im Beitrag #250

---

Ket the bios works fine, there are a ton of options under ZEN options that i have no clue about, but p-states is not there, everything else is spot on.

still cant get the ram any higher than 3333mhz though so it must be my 3200 G.Skill trident z not capable of going higher, although thinking about it it, i doubt that very much, its enthusiast memory.

mouse movement in the UEFI is MUCH smoother, so is keyboard browsing.

windows use is MUCH smoother, so all these options must have done something, everything feels snappier and very fluid.

CPU vcore voltages drop in windows at IDLE to 0.35v but clocks don't, and for some strange reason amd seem to think 1.35v is ok for stock frequencies!! 1.200v is plenty enough for stock on a ryzen 1700

I see you put that aorus logo in the bios, awsome

UPDATE 2

NOT WORKING

You cannot save any CPU changes, you have to reset the bios to defaults using the jumper, Otherwise pc will not boot at all, showing "od" on the LED readout

---