Hi, I'm new here, thank you so much for the work you have done to make all this possible.

I have the ASUS X79-DELUXE running the latest BIOS (X79DLX.CAP/v4805).

When I bought this board (used), the first thing I did was to update the BIOS via USB Flashback (4 versions newer), but it failed and resulted in a bricked board and my solution was then to order and install a new BIOS chip.
The chip "came" with the MAC-address 88:88:88:88:87:88 and the 0.13 (1.3) Intel Boot ROM. Since then, a newer BIOS came (with NVMe support) and I updated successfully with EZ-Flash 2. No brick.

Now my motivation is to fix the Intel LAN code, but I would like to get the updated LAN modules first. When I run UBU 1.65 and open the modded file in UEFITool, the Intel LAN code still shows as version 1.3.
I even tried to mod everything and flash it, but the BIOS remains unchanged. I have tried to mod backup.rom from afudos.exe with same result. I know I probably just can insert the LAN module with UEFITool, but I would like to update other modules as well.

Is it a known issue that UBU sometimes cannot update the modues even it says so? Or where do you think it goes wrong? When I reopen the modded file in UBU, it shows as updated.

Just for the record, here is what UBU 1.65 offers me:

1 - Intel RST(e) OROM and EFI SataDriver
    OROM IRST RAID for SATA    - 12.7.0.1936 > 15.1.0.2545
    EFI IRST RAID for SATA     - 12.7.0.1936 > 15.1.0.2545
    EFI AMI NVME Driver present
    
3 - LAN OROM PXE and EFI UNDI - Intel, RTK, BCM, QCA
    OROM Intel Boot Agent GE   - 1.3.72 > 1.5.62
    EFI Intel PRO/1000 UNDI    - 5.5.23 > 6.6.04
    OROM Realtek Boot Agent GE - 2.52   > 2.64
    EFI Realtek UNDI           - 2.020  > 2.037
    
5 - Marvell SATA Option ROM and EFI
    OROM Marvell 88SE9230      -  1.0.0.1011 > 1.0.0.1024
    EFI Marvell SATA AHCI      -  1.1.0.1001 > 1.1.0.1020
    
7 - Update Intel CPU MicroCode
    IvyBridge-E   CPUID 0306E4 - 428 (new, but my CPU is IB-E i7-4930k!?)
    SandyBridge-E CPUID 0206D7 - 705 > 710
    SandyBridge-E CPUID 0206D6 - 610 > 61A
    
9 - ME Analyzer
    FW ME of scanned BIOS File - 8.1.51.1471 1.5MB (latest is 8.1.65.1586)
 

Thanks!

First and foremost I want to fix the MAC-address (88:87...) but I also want to update the LAN modules. My issue (and my question to whether it's normal), is that the Intel LAN code doesn't seem to have been updated when opening the modded file afterwards in UEFITool. The bits are exactly the same. In UEFITool NE A40, the hex view confirms that the bits is still v1.3 and not v1.5. I don't have problems with the Intel controller. It works despite it's MAC-address.

1. Yes, I really do, I often wake it up from a Asus router.
2. Good to know.
3. I know :)