Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+

Win-Raid Forum (Drivers - Firmware - Modding) � Important Drivers (AHCI/RAID, NVMe, USB etc.) � General: Storage Drivers (AHCI/RAID, NVMe and USB) � Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+

Page 1 of 3 � Page 1 2 3 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sat Jan 14, 2017 8:16 pm

mbk1969

Show info

Posts:	192
Registered since:	09.30.2014
Location:	Russia, Moscow

It is technical thread to discuss implementation of a script for automated update Intel USB3/3.1 Controller/Hub/Switch devices in Win8+

It began here
USB 3.0/3.1 Drivers (original and modded) (52)

Current version of script:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
 
@echo off
 
set step=updating Controller Driver...
echo %step%
echo %step% > .\update.log.txt
dpinst.exe /path ".\Controller Driver - as first" /sa /q /f
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Hub Driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path ".\Hub Driver - as second" /sa /q /sh
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Switch Driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path ".\Switch Driver  - only if applicable" /sa /q /sh
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=rebooting Windows...
echo %step%
echo %step% >> .\update.log.txt
shutdown -r -f -c "Rebooting after Intel USB3/3.1 drivers update"
echo result code: %Errorlevel% >> .\update.log.txt
 

reply

#2 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sat Jan 14, 2017 8:50 pm (Last edited: Sat Jan 14, 2017 8:54 pm)

mbk1969

Show info

Posts:	192
Registered since:	09.30.2014
Location:	Russia, Moscow

Next version.
Change log:
- added output of the current date into log file;
- added the check for a subfolders with drivers;
- added command line parameter "/c" for dpinst.exe to set its output into command console;
- added output of dpinst.exe console log messages into log file.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
 
@echo off
 
date /T > .\update.log.txt
 
set controller=".\Controller Driver - as first"
set hub=".\Hub Driver - as second"
set switch=".\Switch Driver  - only if applicable"
 
set step=checking Controller driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %controller% /B 
if %errorlevel% NEQ 0 exit
 
set step=checking Hub driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %hub% /B 
if %errorlevel% NEQ 0 exit
 
set step=checking Switch driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %switch% /B 
if %errorlevel% NEQ 0 exit
 
set step=updating Controller driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %controller% /sa /q /f /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Hub driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %hub% /sa /q /sh /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Switch driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %switch% /sa /q /sh /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=rebooting Windows...
echo %step%
echo %step% >> .\update.log.txt
shutdown -r -f -c "Rebooting after Intel USB3/3.1 drivers update"
echo result code: %Errorlevel% >> .\update.log.txt
 

reply

#3 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sat Jan 14, 2017 8:59 pm (Last edited: Sat Jan 14, 2017 9:01 pm)

mbk1969

Show info

Posts:	192
Registered since:	09.30.2014
Location:	Russia, Moscow

Fernando, all you have to do when you are preparing new driver bundle is set those three vars to a correct values:

1
2
3
 
set controller=".\Controller Driver - as first"
set hub=".\Hub Driver - as second"
set switch=".\Switch Driver  - only if applicable"
 

Just replace the names of folders and do not touch quotes <">, dot <.> and slash <\>.

reply

#4 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sat Jan 14, 2017 11:32 pm

Fernando

Show info

Posts:	18785
Registered since:	04.27.2013
Location:	Germany

@mbk1969:
Thanks again for willing and having taken the time to create and publish a script, which may give users without any non-Intel USB port the opportunity to manually install the mod+signed Intel USB 3.0/3.1 drivers without risking a total failure of all input devices.

Zitat von mbk1969 im Beitrag #3
Fernando, all you have to do when you are preparing new driver bundle is set those three vars to a correct values:
1
2
3
set controller=".\Controller Driver - as first"
set hub=".\Hub Driver - as second"
set switch=".\Switch Driver  - only if applicable"
 

My future mod+signed Intel USB 3.0 driverpacks will contain the following subfolders:

Controller-Driver_as-first
Hub-Driver_as-second
Switch-Driver_as-third-if-applicable

Here are the download links to my latest mod+signed Intel USB 3.0/3.1 drivers:

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sat Jan 14, 2017 11:50 pm (Last edited: Sat Jan 14, 2017 11:52 pm)

mbk1969

Show info

Posts:	192
Registered since:	09.30.2014
Location:	Russia, Moscow

Here you go:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
 
@echo off
 
date /T > .\update.log.txt
 
set controller=".\Controller-Driver_as-first"
set hub=".\Hub-Driver_as-second"
set switch=".\Switch-Driver_as-third-if-applicable"
 
set step=checking Controller driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %controller% /B 
if %errorlevel% NEQ 0 exit
 
set step=checking Hub driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %hub% /B 
if %errorlevel% NEQ 0 exit
 
set step=checking Switch driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %switch% /B 
if %errorlevel% NEQ 0 exit
 
set step=updating Controller driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %controller% /sa /q /f /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Hub driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %hub% /sa /q /sh /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Switch driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %switch% /sa /q /sh /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=rebooting Windows...
echo %step%
echo %step% >> .\update.log.txt
shutdown -r -f -c "Rebooting after Intel USB3/3.1 drivers update"
echo result code: %Errorlevel% >> .\update.log.txt
 

Of course script should be tested before you start to distribute it within the bundle.
Can you send me dpinst.exe so that I could try it? I just don`t want to download the whole WDK from MS sight.

reply

#6 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sun Jan 15, 2017 12:18 am

Zitat von mbk1969 im Beitrag #5
Can you send me dpinst.exe so that I could try it? I just don`t want to download the whole WDK from MS sight.

Since I am currently travelling and just have a notebook and a cell phone with me, I don't have access to such data. I am sorry about it.

reply

#7 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sun Jan 15, 2017 12:54 am

Zitat von Fernando im Beitrag #6
Zitat von mbk1969 im Beitrag #5
Can you send me dpinst.exe so that I could try it? I just don`t want to download the whole WDK from MS sight.
Since I am currently travelling and just have a notebook and a cell phone with me, I don't have access to such data. I am sorry about it.

Well, then I just will search the Web. No big deal. There is no rush.

reply

#8 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 9:31 am

is this the DPINST you're looking for?

https://ufile.io/e1fec

reply

#9 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 10:05 am

Zitat von infuscomus im Beitrag #8
is this the DPINST you're looking for?

https://ufile.io/e1fec

This is 32-bit version of dpinst.exe

Here is 64-bit version
http://originaldll.com/file/dpinst64.exe/24157.html

reply

#10 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 10:09 am (Last edited: Mon Jan 16, 2017 10:15 am)

mbk1969

Show info

Posts:	192
Registered since:	09.30.2014
Location:	Russia, Moscow

Minor changes:
- added redirection of dir commands output into log file.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
 
@echo off
 
date /T > .\update.log.txt
 
set controller=".\Controller-Driver_as-first"
set hub=".\Hub-Driver_as-second"
set switch=".\Switch-Driver_as-third-if-applicable"
 
set step=checking Controller driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %controller% /B  >> .\update.log.txt
if %errorlevel% NEQ 0 exit
 
set step=checking Hub driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %hub% /B  >> .\update.log.txt
if %errorlevel% NEQ 0 exit
 
set step=checking Switch driver folder...
echo %step%
echo %step% >> .\update.log.txt
dir %switch% /B  >> .\update.log.txt
if %errorlevel% NEQ 0 exit
 
set step=updating Controller driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %controller% /sa /q /f /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Hub driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %hub% /sa /q /sh /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=updating Switch driver...
echo %step%
echo %step% >> .\update.log.txt
dpinst.exe /path %switch% /sa /q /sh /c >> .\update.log.txt
echo result code: %Errorlevel% >> .\update.log.txt
 
set step=rebooting Windows...
echo %step%
echo %step% >> .\update.log.txt
shutdown -r -f -c "Rebooting after Intel USB3/3.1 drivers update"
echo result code: %Errorlevel% >> .\update.log.txt
 

It appears that this xml-file should be near the dpinst.exe:

1
2
3
4
5
6
 
<?xml version="1.0" ?>
  <dpinst>
   <enableNotListedLanguages/>
   <suppressAddRemovePrograms/>
   <language code="0x0409"/>
  </dpinst>
 

with name "dpinst.xml".

reply

#11 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 10:14 am (Last edited: Mon Jan 16, 2017 10:18 am)

Fernando, I successfully executed the script on my work rig with your "64bit Intel USB 3.0+3.1 Drivers v5.0.1.38 mod+signed by Fernando" bundle and all devices were updated from v5.0.0.32 to v5.0.1.38.

So you can prepare new bundles with script and dpinst. The link for 64 bit version of dpinst.exe I placed above leads to archive with "dpinst64.exe" inside. If you will use that archive you should rename exe-file to "dpinst.exe" for 64-bit version of driver bundle because script calls exe-file with that name.
You should add three files to a bundle: dpinst.exe (32-bit or 64-bit - according to a bundle), dpinst.xml (see previous post) and update.bat.

reply

#12 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 12:45 pm

Zitat von mbk1969 im Beitrag #11
Fernando, I successfully executed the script on my work rig with your "64bit Intel USB 3.0+3.1 Drivers v5.0.1.38 mod+signed by Fernando" bundle and all devices were updated from v5.0.0.32 to v5.0.1.38.

That is very good news - thanks for having done the whole work and for having tested it!

Zitat
So you can prepare new bundles with script and dpinst.

I will do it as soon as possible (not before this evening).

reply

#13 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 2:13 pm

@mbk1969:
Unfortunately I can get neither the 32bit not the 64bit variant of the file dpinst.exe properly downloaded and extracted (either the 7z archive is shown as corrupted or my Antivirus MS Defender announces a found virus).
Can you please upload both files to good hoster and post a link via PM?

reply

#14 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Mon Jan 16, 2017 2:36 pm (Last edited: Mon Jan 16, 2017 2:53 pm)

Zitat von Fernando im Beitrag #13
@mbk1969:
Unfortunately I can get neither the 32bit not the 64bit variant of the file dpinst.exe properly downloaded and extracted (either the 7z archive is shown as corrupted or my Antivirus MS Defender announces a found virus).
Can you please upload both files to good hoster and post a link via PM?

Will do...

But of course it would be safer if someone else could test script. I tested only on notebook with Win8.1

reply

#15 | RE: Script for updating the Intel USB3/3.1 Controller/Hub/Switch devices in Win8+ datum

Sat Jan 21, 2017 12:11 am

@mbk1969:
Meanwhile I returned from my travelling and am able to do some tests with different systems.
I just have successfully tested your update.bat and dpinst.xml in combination with the old dpinst.exe and my recently offered "64bit Intel USB 3.0+3.1 drivers v5.0.1.38 mod+signed by Fernando" with my Z170 system running Win10 x64 Build 15014.
Result: The driver update worked flawlessly.
Here is the content of the update.log.txt file:

20.01.2017
checking Controller driver folder...
iusb3xhc.cat
iusb3xhc.inf
iusb3xhc.man
iusb3xhc.sys
checking Hub driver folder...
iusb3hub.cat
iusb3hub.inf
IUsb3Hub.man
iusb3hub.sys
checking Switch driver folder...
iusb3hcs.cat
iusb3hcs.inf
iusb3hcs.sys
WdfCoInstaller01009.dll
updating Controller driver...
result code: 1
updating Hub driver...
result code: 1
updating Switch driver...
result code: 1073741825
rebooting Windows...
result code: 0

reply

Asus Sabertooth Z-97 Mark 2 RST setup � � ASUS AM1I-A / Athlon 5350 Kabini / Samsung 850 / Win XP AHCI setup

Page 1 of 3 � Page 1 2 3 Page �

Please enter a reason for warning.