@Thom
Hello and welcome to the community,
many people are reporting this issue and although i personally did not encounter this issue using the dvd installation media, I have tried with usb installation media (made with MCT) with a few installs and had varying results.
I am not sure why these errors are occurring or what the underlying issue my be.
Side note. the clover usb shows twice in your bios because it is both a uefi(efi) device and a legacy bios boot device since this is how we intentionally set it up if you followed my instructions in the sticky.

@Meowster
I believe the screen that shows a 6 is actually in relation to the boot6 method used in clover and in most cases the boot will simple failover in a small period of time but it does sometimes hang. Again i am no clover expert and i am not that intricately familiar with clovers workings. however i believe it is possible to fix this behavior via the config.plist somehow but i have not been able to figure that one out as yet.

@sibliss Thanks for getting back to me quickly, it's much appreciated! I created a new bootable with a different version of Win 10 using Rufus. I was able to install it just fine and it was working in no time at all with Clover booting to my NVMe drive! Just a new Windows image on my USB stick did the trick. I'm not sure why this happened either, but I'm glad it's working now. Thanks again, your dedication here is unmatched- keep it up!

@sibliss @Lost_N_BIOS I manage to install windows on it. I changed my gpu to rtx 2060 and the problems disappeared. Now i have another one. When i try to do something that is demanding to the nvme(reads and/or writes) he freezes then blue screen. I tried to use it just as an additional driver but i get the same problem except that when booting from windows on my sata ssd and try to open a game or unreal engine(for example) that i stored on the nvme, it freezes then the drive becomes irresponsive but windows still running fine...

my system: GA 970 ds3p fx 2.1 F1 - fx 8320 - rtx 2060

@ijokerboy well done, this new error is either a driver problem for your nvme remember to install vendor drivers for your adapter card in Windows. Which adapter card are you using for your nvme ? Not all adpater cards work properly with this there are some cheap china ones that I know of which do not work.

i have two different models. I think it's a dead end man... I believe its my motherboard that somehow cant handle when my graphics card has to work. The nvme just freezes and disconect itself... i bought two asgard nvme's and they dont'y have their own drivers so im stuck with generic standard nvme driver from windows... T_T

Hello Guys, When i generate my Cloverstick and go to open this folder -> \EFI\CLOVER\Drivers\Off - HERE ARE ALL FILES IN ROOT FOLDER LIKE "Nvmexpressdxe.efi", I GOT NO FOLDER "DRIVERS".
MY CLOVERSTICK Dont got 64 DRIVERS

My settings screen shot -> https://gyazo.com/a4c413dde1578f06cbeff7080e5e8e98

MOBO -> m5a78l-m/usb3 -> Last Bios Update Ref. 2015.
Proc -> FX 8350 Black edition
16 Gb DDR3 1866mhz -> Hyper Fury Black Edition
Cx 750W Corsair
R9 280 Asus CUII 3GB GDDR5 384Bit.

Trying to do bootlooader for M2 Nvme Kingspec 2280/2248 512GB with Adaptor in MiniPcie 2.0.


What i Do ?
Someone can Help me ?

@Diego90Ferreira
Hello if the BDU has not generated the drivers directory than you should try the BDU again and hopefully this time it will work properly. Always use BDU to make clover stick or it will not work the same. Also there will not always be a drivers64 directory because in newer versions the drivers directory is both 32 and 64 therefore just drivers.

ok....got into clover....but how do i select my usb with the win 7 install on it? it gives 3 items at the top....but none work.....keep getting error messages

bump bump...

anyone have this particular problem ?

@sjsingle1
How did you make the usb bootable?
Sometimes you have to try a few options the Microsoft preferred option is the Windows 7 DVD to usb tool.
Also please ensure the usb is inserted before booting clover since by the time you get the gui its already completed the scan for devices.

my win 7 usb is bootable....used it to install many a time .....the win7 usb is inserted with the clover usb at the time of boot

Thanks for that Guide.
Works on
GA-G41M-Combo with intel dual core
Low Profile PCI-E 3.0 x1 Lane to M.2 NGFF M-Key SSD Nvme AHCI PCI Express Adaptercard
Transcend TS128GMTE110S 128 GB

if anyone got trouble....use different USB-Sticks. I needed 3 trys with 3 USB-Sticks.

@atroesch

trouble booting into clover...or win 7 like me?

Zitat von sjsingle1 im Beitrag #628

---

@atroesch

trouble booting into clover...or win 7 like me?

---

@sjsingle1
Clover cannot boot all usbs, i note in particular it seems to have trouble with usbs made using Rufus. But i agree with atroesch try again with a different usb.