Hello Fernando,

oright. got after days by days, still was tryin to get > The right n original version of WXP x64 alot useless versions.
until the true one, may who's like it.
a mix of 2003 n x64 bit sp2 release packge, as it it real original untouched.
y you was right, useless that one i had burned.
unstable never seen.
but now as i said, this one works great.
3-5 times inst. & deinstlld.
that common or more, windows update hotfixpackage dillema, ive never done before.
still not solved.
but i got a possibly on 138 maybe more counts on this hotfix packages downloaded in a folder.
80-90% were working..
rest of them needs a prerequisites installing, that's ok im fine with that.
on every manual hotfix installing system was get boost up %tly faster.
but still on the device driver updates.
like for the "intel 1218-v (2)"
no resonable dwnload found.
i had downloaded your full archive with sata nvme and more stuff.
so maybe the right driver is in it for my board ?
phrase: twincat as compatible intel driver ..hmm
once clear, we all - anyone want t stay up2date with the hardware.. so what ?
i mean, a upgrade patching that whole mobord, due to bios up and to with all available devices onboard plugged ?
thats a dam lot work, anyway.. i got time ;^
but thats a thread to LNBios section.
very impressive he's doin, no doubt.
thats all.

I am also suffering BSOD with 0x0000007b during text mode installation of Windows XP.

The motherboard is a P67 B3 chipset and therefore a series 6. I've integrated iaAHCI.inf with the Desktop/Workstation/Server Express SATA AHCI without success on several versions of the Intel iaStor.sys based drivers. Furthermore, when booting into Windows 10, the modern intel driver using iaStorA.sys lists the device as Desktop/Workstation/Server Express SATA AHCI Controller which seems all should be correctly matching.

Is there something i missed?

Hello first time.
My Motherboard : Asus P8Z68-v pro / gen3
Windows XP system that runs in IDE mode
In the device manager in the IDE, ATA / ATAPI shows
Intel (R) 6 Series / C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1C00
Intel (R) 6 Series / C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08
What drivers should I use to switch from IDE to AHCI ?
Greetings
mackis
PS Sorry for the poor english

Thank you Fernando.
I set the sata AHCI mode in Bios, but I had to leave the IDE mode on Marvell storage.
I have installed Windows XP.
There is now Intel Desktop Workstation / Server Express Chipset SATA AHCI Controler in the device manager
Then I changed the Marvell Storage settings in Bios to AHCI mode.
I started Windows XP and there was no DVD drive.
I went back to Bios and set Marvell Storage to IDE.
I started Windows XP and copied the Asus CD with drivers to the desktop.
I went back to Bios and changed Marvel Storage to AHCI.
I started Windows XP and ran Asus drivers copied to the desktop.
Everything installed beautifully and everything works.
Start Windows XP in AHCI mode is much faster.
Thank you very much for help.
mackis

Hello Fernando,

Is there a working driver for XP :
USB : PCI\VEN_8086&DEV_A3AF
SATA : PCI\VEN_8086&DEV_A382

Edit : i solved my sata problem by using a pci-e asmedia sata to install xp, then connect to motherboard back the hard drive.
But Usb still doesn't work, and i have only one pci slot for the graphics card.

Thank you.

Hi Fernando,
So i have been trying to install windows xp on my asus laptop for a couple of days now.
The device id of my SATA AHCI controller is DEV_9D03 and i used ">Universal 32bit Intel RST textmode driver v11.2.0.1006 mod+signed by me (done at 01/16/2020)<" to slipstream the drivers in xp iso using nlite.
I am using CD on which i have burned the iso.

The problem is my laptop freezes at "Welcome to Setup" screen.
I have attached screenshots below

I have tried by pressing both F5 and F7, all giving same result.

Yes i installed the "Intel(R) SATA AHCI Controller DEV_9D03 added by Fernando" and also yes i used the iso with sp3 integrated

I am getting BSOD 0x000000A5 when i don't press either F5 or F7 also there is only one 1TB hdd in my laptop. Previosly i was using windows 10 dual booted with ubuntu in uefi mode on gpt partition disk.Then i formatted my entire disk in mbr format and then continued with xp installation so yes it was a clean installation.

1st page a lot of dead link please reupload :) ... thanks