Hi there!

I have BSOD 0x0000007b. I describe to you step by step what I do to install Win XP.
HW ID: DEV_A102
OS(clean): Windows XP Pro sp3 VL (MSDN)

1. So I download this driver pack: Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando
2. In nLite i choose: Integrate Drivers and Create Bootable ISO
3. Choose driver: Insert -> Single driver -> iaAHCI.inf -> Intel(R) SATA AHCI Controller DEV_A102 added by Fernando
4. Create ISO
5. Create bootable USB drive(sorry but i don't have cd/dvd rom drive to burn ISO on cd)
6. Insert USB drive in USB 2.0 port
7. Boot from USB drive with Legacy mode
8. Press F7 when I see prompt to press F6(but there is no any indication that I'm pressing F7)

After all this steps I still have BSOD 0x0000007b. Any ideas how to fix it? Could you help me please?

@Fernando:
When I don't press F7 I have an another BSOD 0x000000a5 "The BIOS in this system is not fully ACPI compliant".
With integrated Intel AHCI driver I have the same BSOD 07b. That's why I used the driver from your pack.

@Fernando:
Well. I've fixed BSOD 0a5 by new ACPI.sys which i've packed to *.cab archive and replaced ACPI.SY_(no need to press f5/f7 when promted to press f6), but still have BSOD 07b. Check please attachment files. Is it right driver for me?

@Fernando:
Thanks for your help, but I have a MiniPC, so I can use only external USB DVD Rom Driver. Still not working with it, BSOD 07b. Also I've cleaned my SSD by diskpart as an option and I've tryed to install XP from USB flash drive on my old PC with SSD(from MiniPC) and all is good, there is no BSOD. But on my miniPC I still have BSOD. So there is no problem with SSD and USB flash drive. Any ideas how to fix it?

Hello, And Thank you very much to be in this awesome forum.

so my sugesstion is:

How can i see that or an Compatible'd ' compiled > Integrated Driver Setup-List wich i've done from nlite ?

easier to say:

is there a advanced workaround for that nlite iso end-compilation, wich let me know if i had an correct driver setup in that os, before i burn in that, as test ?

° at 1st; sucessfully intregrated the drivers in nlite and testet in real mode as you described and booted to the X64 Setup. but the evo 840 wasnt in bios allso same on the XP Setup formatting table
so i followed your guide and:
i changed the right Sata Ports to > Sata 3_0 <- also the right > Sata responding Start Port < >for my SSD Samsung Evo 840.
at next i will check an continous Setup Test and see if i had done right my work :D
aloha...
to be continued...

good day 🙂

this is a real great work from you, with good compiled drivers, fernando.
thank you.
so all seems to be good.
learning by doing is a all so good aspect for knowledge.
that's what i do. very simple.
okay, i saw, that xp build that i had choosen by buildnumber 3719 isnt good as well.
might be the wrongest one ever, correct me if iam wrong !
but drivers searching and adding a Horror scenario 😅
even a windows updating impossible, cause of less unavaliabled high encryption package e.g. https ( g[d god, had coats me of alot hours to get a acceptable surfing ) in this retro System 😬.
so the matter now is;

1., wich xp x64 build you prefer for me, for an good upgrade ?
2., is, a or that wich i habe firstly mentioned.. keyword: nlite & developing.. but that is a another story for a another chapter on.

Version is:
5.2.3790.3959

edit just for unconfusing;
https://betawiki.net/wiki/Windows_Server...build_3790.3959
this is beta ^^ version ?

Zitat

---

From which earlier released OS do you want to upgrade to XP x64?

---

that code version troughput iv'e read > 5.2.3790.3959 is as last session point showed on my performed action in nlite, wich is on my 840er's drive installed.

but to answer your question, wich os version on that drive installed is, got to figure it out.
i was thinking something about the 37.. might be wrong..
lemme know wich latest build i can use for, to get it right.