Forum - RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD

#796 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Tue Mar 27, 2018 10:51 am

Zitat von yeakyau im Beitrag #795
is this driver should suitable for motherboard chipset asus H-110mk ?

Yes, provided, that your on-board Intel SATA Controller is running in AHCI mode.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#797 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Tue Mar 27, 2018 11:44 am (Last edited: Sat Mar 31, 2018 5:26 am)

HI,

I have successfully install windows XP , but may i know how to get the missing driver such as network card audio PCI　memory controller universal serial bus video controller standard floopy disk controller ? since asus website doesn't have win XP driver . TQ @fernando

reply

#798 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Mar 31, 2018 9:15 pm

Hi Fernando i has the same problem that has "yeakyau". I sucessfully install xp in my PC with motherboard Asus Z97-P. Now for Network i installed a driver for XP for realtek card that is inside the moderboard and it is working. I am missing drivers for PCI cards and some USB controllers.

Can you help us?.

Thanks Fernando

reply

#799 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Mar 31, 2018 9:57 pm

@yeakyau:
Unfortunately I cannot help you regarding XP drivers for other devices.
My advice: Check the HardwareIDs of the related devices and do a Google search for matching XP drivers.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#800 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Apr 07, 2018 10:55 pm

Greetings, I would appreciate some help.
I'm confused about where to find what S-ATA controller my system has (Z97 chipset, Asus Z97-m plus board) and do you have xp version for it?
I would like to dual boot win10 and xp32bit and because I already have win XP installed (IDE) on a separate drive, could I update driver in device manager in XP ?

reply

#801 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Apr 07, 2018 11:10 pm

@Frozen:
Welcome to the Win-RAID Forum!

Zitat von Frozen im Beitrag #800
I'm confused about where to find what S-ATA controller my system has

Boot into Win10, run the Device Manger, expand the section "IDE ATA/ATAPI Controllers", right-click onto the listed AHCI Controller and choose the options "Properties" > "Details" > "Property" > "HardwareIDs". Only important are the VendorID (VEN_8086=Intel) and the DeviceID (DEV_XXXX) of the listed Intel SATA AHCI Controller (maybe named "Standard SATA AHCI Controller").

Zitat von Frozen im Beitrag #800
I would like to dual boot win10 and xp32bit and because I already have win XP installed (IDE) on a separate drive, could I update driver in device manager in XP ?

It may be possible to force the installation of the currently wrong AHCI driver while running in "IDE" mode and to switch the SATA mode to "AHCI" before rebooting, but I recommend to integrate the XP compatible modded Intel AHCI driver v11.2.0.1006 into a Windows XP Image and to do a clean OS installation in AHCI mode.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#802 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Apr 08, 2018 3:14 pm (Last edited: Sun Apr 08, 2018 5:35 pm)

Zitat von Fernando im Beitrag #801
Boot into Win10, run the Device Manger, expand the section "IDE ATA/ATAPI Controllers", right-click onto the listed AHCI Controller and choose the options "Properties" > "Details" > "Property" > "HardwareIDs". Only important are the VendorID (VEN_8086=Intel) and the DeviceID (DEV_XXXX) of the listed Intel SATA AHCI Controller (maybe named "Standard SATA AHCI Controller").

It reads this

PCI\VEN_8086&DEV_8C82&SUBSYS_85341043&REV_00
PCI\VEN_8086&DEV_8C82&SUBSYS_85341043
PCI\VEN_8086&DEV_8C82&CC_010601
PCI\VEN_8086&DEV_8C82&CC_0106

so my driver is 8C82?

So just to make sure if I understand this correctly, I have downloaded said file (Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando), created Windows XP image and when the list pops-up in NTLite I should integrate just specified (8C82) into an image, nothing more?

reply

#803 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Apr 08, 2018 5:38 pm

Zitat von Frozen im Beitrag #802
So just to make sure if I understand this correctly, I have downloaded said file (Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando), created Windows XP image and when the list pops-up in NTLite I should integrate just specified (8C82) into an image, nothing more?

Yes!
Some corrections:
1. 8C82 is not a driver, but the DeviceID of your on-board Intel SATA AHCI Controller.
2. You should use the tool named nLite and not the tool named NTLite (which is only usable with newer Windows Operating Systems).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#804 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Apr 08, 2018 9:20 pm (Last edited: Sun Apr 08, 2018 9:25 pm)

Zitat von Fernando im Beitrag #803
Yes!

Thank you!
It worked! XP installed with AHCI enabled.

reply

#805 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Mon Apr 09, 2018 8:49 pm

Hello ,

i try to install Windows XP x86 on a Lenovo T440p and still get the failure : the file ahcix64.sys is corrupted
i build an iso using nlite with fernados Driver Pack , can anyone help me ?
XP iso : Microsoft.Windows.XP.Professional.SP3
thanks

reply

#806 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Mon Apr 09, 2018 9:02 pm

@Scofield:
Welcome to the Win-RAID Forum!

If you want to integrate a driver into a 32bit OS like Windws XP, you have to choose the 32bit driver.
You should never install/integrate a 64bit driver into a 32bit OS!

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#807 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Mon Apr 09, 2018 9:08 pm

thank you Fernando, but i choose Universal 32bit Intel RSTe AHCI+RAID drivers v15.9.3.1026 mod+signed by Fernando and i am using 32bit Windows XP Sp3 Iso

reply

#808 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Mon Apr 09, 2018 9:17 pm (Last edited: Mon Apr 09, 2018 9:18 pm)

@Scofield:
None of the mod+signed Intel AHCI+RAID drivers, which I am offering within this Forum, contains an AMD AHCI/RAID driver named ahcix64.sys.
My conclusion: You have either integrated an absolutely wrong AMD driver or used a Windows XP image, which had already been (wrongly) modified before.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#809 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Mon Apr 09, 2018 9:31 pm

i will download a new Windows XP ISO and try with your AHCI drivers.

reply

#810 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Mon Apr 09, 2018 9:43 pm

@Scofield:
Before you are trying to integrate any textmode driver (like the Intel AHCI one) into a Windows XP Image, you should read the start post of >this< thread.
By the way: The "Universal 32bit Intel RSTe AHCI+RAID drivers v15.9.3.1026 mod+signed by Fernando" does not support Windows XP and cannot be successfully integrated, because it doesn't contain the required TXTSETUP.OEM file.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.