i solved xp problem including usb than you very much.i am asked windows clean one from any forum member.am really sorry about that!

Installing XP 32 Bit on Sony Vaio SVE1512H6E with Intel HM76 Chipset:
So i tried several ways to get XP installed on that laptop. I need XP 32bit for car diag programs.
First BIOS was locked and tried several different drivers from Intel, Lenovo and this one from there.
I tried it with an usb floppy disk with F6 methode and also injected drivers into XP image. It was always the same.
After setup loaded all files black screen and shutdown without warning.
I tried the 7 Series / C216 chipset driver, because it is displayed in Win10 device manager.
After all i bought an SPI programmer, desoldered the bios chip, made a dump, received an unlocked bios, programmed the chip and soldered it back. All went very good.
So I got an unlocked bios now and i set the AHCI to IDE.
And now, the same behavior... still crashing after files loaded. Also tried all methods from above again. No success.

Any ideas?

@Fernando
Thx for reply. I tried the drivers from this forum after official Win drivers failed.
But the error also happend. Both ways. With floppy disk and also with injected drivers in xp image.
But i'll give it another try. Again with the mod+signed intel AHCI driver from you.
I didn't try the Win10 drivers in XP. Only wanted to tell you how I know the it must be 7series/C216 drivers.

When setting controller to IDE i first tried installing from an untouched XP image with the same behavior.
Somewhere i read that these Intel chipsets only provide AHCI mode. For IDE mode there has to be a 3rd party host controller.
That makes me wondering as I can choose IDE. From mainboard schematics i can see that there is no other host controller chip.

@Fernando

So i set the bios back to AHCI and used the driver you wrote on usb floppy disk.

With an untouched XP image Sp3 on cd and F6 option driver 1E03 still the same. After preload the laptop shuts down. It lasts 1 second on the window where drives should be displayed to select the right one for installation. But there are no devices listed.

So now I installed win10 64bit again to make Sure i use the right hw id drivers.

In SiSoft Sandra it shows Sony Panther Point Mobile 6 port SATA AHCI controller.

In device manager the atapi controller shows HW Id
PCI\VEN_8086&DEV_1E03&CC_0106
Matching device ID PCI\CC_010601

Any other ideas or info needed ?

@Fernando

Yes, no error message.

So i injected the 1E03 driver from your suggestion with nLite and burned this image on CD.

Tried both options, first AHCI and them IDE. Still the same problem. Shut down 1s after files loaded with no warning. No BSOD. I guess it's impossible to install XP on this laptop.

I thought, that if IDE is enabled, XP should get installed without any trouble, or do i still need special drivers injected for 7series chipset?

@Fernando

Thx man. That did the trick on this laptop. Turned on IDE in bios again and hit F7 at F6 prompt.

@Fernando
It turns out that ACPI is the problem. Installed XP with 1E03 injected and AHCI enabled without problems.
But had to press F7 at installation. Now the laptop doesn't know that it has a battery. And it also doesn't shutdown automatically. Have to push power button to turn it off.
I can also change some ACPI settings in BIOS but that didn't solve the problem. Still shutting down during installation when i didn't press F7.

Any ideas? I read it is possible the install ACPI in ein itself but also read that it doesn't work because another HAL needs another kernel.

Fernando, I really appreciate you making this information available. I have an ASUS Maximus IX Hero motherboard that I'm fairly certain has an Intel storage controller, but I have no idea which one it uses. I've searched and used Google, but so far I've came up empty. Any ideas where I can find this information or which text mode driver I should use?

Thanks.

dear fernando,love you .
i'm chinese
english very poor
press F5 F6 F7 key ,blue screen ,error

A5
7B