Forum - RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD

#616 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Wed Dec 28, 2016 11:59 pm

@eXeQiEl:
Welcome at Win-RAID Forum!

Zitat von eXeQiEl im Beitrag #615
the pack with driver files that you extracted from "Intel� Chipset Device Software " is not online anymore, neither it's mirror.

Thanks for the info, which prompted me to update the related part of the start post.
The new links should work now (and hopefully for a long time).

Happy New Year!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#617 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Wed Dec 28, 2016 11:59 pm (Last edited: Thu Dec 29, 2016 12:20 am)

wooooWWW, what a speeder!! thanks alot again for the fastest response i ever had on a forum!!! XD

reply

#618 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Jan 08, 2017 12:45 am (Last edited: Sun Jan 08, 2017 10:37 am)

Hi everyone (-:

Zitat von Fernando im Beitrag #1
a) For users with an Intel ICH7R/M, ICH9M, ICH10R/D, 5 Series, 6-Series or 7-Series (except X79) Southbridge AHCI or RAID system:
If you are going to install the 32bit version of Windows XP or Windows Server 2003, I recommend to download the following official 32bit Intel textmode driver v11.2.0.1006 WHQL dated 05/30/2012:
>32bit Intel RST textmode driver v11.2.0.1006 WHQL< (>MIRROR<)

Fujitsu recommends v12.8.0.1016 for XP, but that download is missing a TXTSETUP.OEM file.
I found v11.2.0.1006 on Intel's site, but �PCH SATA AHCI Controller� isn't mentioned in the corresponding F6Readme.txt.

OS: Windows XP Professional SP3 32-bit
Mainboard: Fujitsu D3062-A1x (Q67 chipset)
CPU: Intel i5-2400
HDD: Western Digital Caviar Blue SATA III (WD2500AAKX)

Is there anything I'm missing out on if I go for the official v8.9.0.1023? Thank you.

reply

#619 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Jan 08, 2017 11:01 am (Last edited: Sun Jan 08, 2017 12:18 pm)

Zitat von Bugger Vance im Beitrag #618
Is there anything I'm missing out on if I go for the official v8.9.0.1023.

This old driver, which belongs to the outdated Matrix Storage Management platform, will work, but I would prefer the RST driver v11.2.0.1006 WHQL.
By the way: Intel's "official" AHCI/RAID drivers (published at Intel's Download Center) have been designed for Intel mainboards and not for all mainboards with an Intel chipset.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#620 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Jan 08, 2017 8:45 pm

Zitat von Fernando
Zitat von Bugger Vance
Is there anything I'm missing out on if I go for the official v8.9.0.1023.

This old driver, which belongs to the outdated Matrix Storage Management platform, will work, but I would prefer the RST driver v11.2.0.1006 WHQL.

Danke for clarifying!

Zitat von Fernando
By the way: Intel's "official" AHCI/RAID drivers (published at Intel's Download Center) have been designed for Intel mainboards and not for all mainboards with an Intel chipset.

That's actually one of the reasons why I was asking. (Stability is my main concern. You discuss this in �Which are the �best� Intel AHCI/RAID drivers?�.)
I've also read your explanations �About �modded� drivers and how to get them installed�. To my surprise, a binary comparison of the files contained in the �official� v11.2.0.1006 downloads for Intel-branded boards�

#17882: v8.9.0.1023 (17/Jul/2009)
- readme.txt
- releasenotes.htm
- f6flpy3289.zip
- f6flpy6489.zip
- IATA89ENU.exe (InstallShield)
- IATA89CD.exe (InstallShield)
#18668: v9.5.0.1037 for Intel boards (14/Oct/2009)
- STOR_all32_f6flpy_9.5.0.1037_PV.zip
- STOR_all64_f6flpy_9.5.0.1037_PV.zip
#21854: v11.2.0.1006 for Intel boards (11/Jun/2012)
#23295: v11.2.0.1006 for Intel boards (11/Jun/2012)
#23060: v12.8.0.1016 (08/Aug/2013)
- readme.txt
- ReleaseNotes.htm
- f6flpy-x86.zip
- f6flpy-x64.zip
- SetupRST.exe (7-Zip)

Extracting InstallShield EXEs:

foobar.exe -A -A -P X:\foobar

Extracting Windows Installer MSIs:

msiexec /a foobar.msi /qb TARGETDIR=X:\foobar

� and the one provided by you (32bit Intel RST AHCI & RAID driver v11.2.0.1006 WHQL.rar) showed that they are identical. I guess � at least in this particular case � both official and modded drivers can be used .

Thanks again for your help in getting to the bottom of this conundrum once and for all.



reply

#621 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Wed Feb 01, 2017 10:54 am

Hi all
Help me please
I have motherboard Asus H97 Plus, can't install Server 2003. tried many drivers and was confused
Recommend something please if there is an option

reply

#622 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Wed Feb 01, 2017 12:19 pm

@align:
Welcome at Win-RAID Forum!

Zitat von align im Beitrag #621
I have motherboard Asus H97 Plus, can't install Server 2003. tried many drivers and was confused

The only driver, which will work, is the "Universal 32bit Intel RST driver v11.2.0.1006 mod+signed by Fernando", but during the driver integration procedure you have to choose the specific Intel SATA Controller model, which is managing your desired system drive.
Questions:
1. To which SATA mode (AHCI or RAID) has the Intel SATA Controller been set within the BIOS?
2. Which is the DeviceID of the currently running Intel SATA Controller? For details to find it out please read the start post of this thread carefully.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#623 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Wed Feb 01, 2017 2:16 pm (Last edited: Wed Feb 01, 2017 4:14 pm)

I have only used the original drivers of different versions. But now I am ready to try the modified
Tried in all modes and AHCI and RAID. Just would like RAID, but in a pinch can and AHCI
Installed Server 2008 and it looked DEV 2822

reply

#624 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Wed Feb 01, 2017 4:13 pm

@align:
Ok, if you are going to install W2k3 in RAID mode, you can use the original Intel RST driver v11.2.0.1006 WHQL instead of the modded variant.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#625 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Thu Feb 02, 2017 2:31 pm (Last edited: Thu Feb 02, 2017 2:33 pm)

Tell the full story, maybe someone will be useful.

Nothing worked. Used the Raid driver from a floppy drive. After copying the files from the image, the system hangs on "Setup is starting windows". Long tormented, until I think to download another image. Instead 2003 downloaded 2003sp2. Probably the image of 2003 was broken or help sp2, but the "Setup is starting windows" was successful. However, a new problem - during the installation there was a message on impossibility to copy the driver files from the floppy drive. To unsubscribe from floppy, using the program Nlite has integrated the necessary driver into the image. The OS works is a miracle. .

Now I am suffering with the drivers. Some give BSOD. Almost all picked up. Left Video adapter,USB 3.0, ACPI - I think without them will work. The main network works.

Thank you very much for your help.

reply

#626 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Fri Feb 03, 2017 8:22 pm (Last edited: Fri Feb 03, 2017 8:23 pm)

c) For all users with an Intel AHCI/RAID system from ESB2 or ICH7R/M up (incl. X79, 8- and 9-Series Chipsets):

For all these users, who want to get XP (32bit) installed in AHCI or RAID mode, I recommend to download and integrate this modified v11.2 RST driver (the regular Intel RSTe driverpacks will not work for all users):
>Universal 32bit Intel RST textmode driver v11.2.0.1006 mod+signed by Fernando< (>MIRROR<)
Here is the link to an appropriate 64bit textmode drivers for all Intel AHCI and RAID Controllers from ESB2 and ICH7R/M up (incl. X79, 8-/9-/100-Series Chipsets):
>Universal 64bit Intel RST textmode driver v11.2.0.1006 mod+signed by Fernando< (>MIRROR<)
Note: These are the latest and probably best conventional Intel RST drivers, with added HardwareIDs of all officially not supported Intel AHCI and RAID Controllers (ESB2, ICH8/9/10, X79, 8-Series, 9-Series and 100-Series Chipsets)

Greetings! Will the above work with Z270 chipsets and XP32/XP64/W2K3, no RAID? It says "100-Series Chipsets" so I am just confirming that they will also work with 200-Series Chipsets. Thanks!

reply

#627 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Fri Feb 03, 2017 9:44 pm

@JB2017:
Welcome at Win-RAID Forum!

Zitat von JB2017 im Beitrag #626
Will the above work with Z270 chipsets and XP32/XP64/W2K3, no RAID? It says "100-Series Chipsets" so I am just confirming that they will also work with 200-Series Chipsets.

No, none of the drivers, which I have currently linked within the start post, do support Intel 200-Series Chipset systems running in AHCI mode.
Simple reason: When I modified the Intel RST drivers v11.2.0.1006 the last time, I didn't even know the DeviceID of the upcoming Intel 200 Chipset SATA AHCI Controller (DEV_A282).
As soon as I have the required time (will be within the next 3 days), I will re-modify and re-sign the related Intel MSM and RST drivers. Then I will present Intel RST AHCI drivers, which should support Intel 200-Series Chipset systems (the required HardwareIDs are added into the related INF file).

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#628 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Feb 04, 2017 12:34 pm

@JB2017:

Attached is the desired freshly modded and signed 32bit Intel RST driver v11.2.0.1006 with added support of Intel 200-Series SATA AHCI Controllers.
Please report, whether it worked for you or not.

Good luck!

Fernando has attached files to this post

Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando.rar

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#629 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Feb 04, 2017 11:46 pm

Wow thanks Fernando! will these work with XP Pro x64/W2K3 x64?

reply

#630 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Feb 05, 2017 12:47 am

@JB2017:

Zitat von JB2017 im Beitrag #629
will these work with XP Pro x64/W2K3 x64?

No, for XP x64 or W2k3 x64 you have to use the "Universal 64bit Intel textmode driver v11.2.0.1006 mod+signed by Fernando". I just have updated this driver as well. You can find the download links within the start post of this thread.

@all:
Update of the Start Post
Changelog:
updated: "Universal 32/64bit Intel RST textmode driver v11.2.0.1006 mod+signed by Fernando" (now with added support of Intel 200-Series Chipset systems)
updated: "Universal Intel RST Drivers & Software Set v11.2.0.1006 mod+signed by Fernando" (now with added support of Intel 200-Series Chipset systems)

Good luck with these mod+signed Intel RST drivers with enhanced compatibility!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.