Zitat von Fernando im Beitrag #586

---

I definitively doubt it.

---

Thanks for your help- in the end I actually managed to get it working! Here's what I did:

So I started from the top..
-I checked that my SSD is connected to an Intel SATA port on my Z97-K motherboard
-I made a fresh copy of my untouched Windows XP Professional 32bit CD using nLite and saved the copied files in a folder in my SSD to modify
-I downloaded the Intel RST driver v11.2.0.1006 bundle as per your first post
-I injected the 8C82 driver into my freshly copied image and burnt it to a disc
-Tested installing - failed with 0x0000007b (No HDD found BSOD)
-Checked BIOS version and flashed BIOS with newer version from ASUS
-Tested installing - success!

I had other troubles once I got into Windows, like having no network drivers and not being able to boot Windows 10 back up again. But those were sorted with a simple boot recovery USB and downloading the driver on my Win 10 and popping it into my Local XP drive.

Thanks for your suggestions Fernando, much appreciated.

Zitat von Fernando im Beitrag #590

---

Although I do not really understand the relationship between updating the mainboard BIOS and the successful Windows XP installation, I am glad, that you finally succeeded.
Maybe you haven't used a clean XP image as source, when you had done your previous tests. Each new test has to be done from scratch by copying the XP CD content and not on the basis of any previously processed OS image.

---

Dear Mr Fernando
I want to install windows xp sp3 on my laptop.
I have Toshiba Satellite (Laptop) C50-B-15Z and i downloaded a standard ISO of windows with SATA Support but it not worked.
Error was these :
0. Cant use standard normall windows xp disc -> so i used a cracked SATA support
1. Boot Problem -> Fixed by UEFI to CSM in BIOS
2. ACPI.sys Error -> Fixed by F7 on Setup
3. Hard Partition Problem -> Fixed by GPT to MBR and Static Partitions
AND :
4. Hard not detect (With Blue Screen) -> I cant find Native for SATA / AHCI to ACI in BIOS
So :
- I tried your perfect way about using nlite and add AHCI SATA DRIVERs and i Added Universal SATA AHCI TextMode drivers and made a new ISO.
- > By this new iso first part of XP setup Finished but after first restart i just can see windows logo for a moment then it gone and nothing never coming... (Black screen and nothing work)
Why? What i should do?
+ This Problem Fixed -> I think because i used F5 in start of setup and using Standard Item.

but now 2 problem again :
+ By windows xp setup, computer can not restart automatic, (i guess the problem can be for power driver, i dont know!)
5. after finishing the Second part of XP setup, and after the restart, The BLUE SCREEN error page about can not detect hard drive, appear again! -> i dont have any idea about this...
Please Help...

(Sorry for my bad English)
Thanks, and Best Regards

Hi all, I'm new here,

I'm having some trouble trying to use these drivers to install XP on my system, I have a Gigabyte GA-Z97X-UD5H-BK motherboard if that helps.

I've tried using nlite, as well as trying the driverpacks from the driverpacks.net forums using DP BASE.
Both methods will integrate into my install media successfully, however when it gets to the drive selection part of the install, I get a 7B BSOD

HWID
PCI\VEN_8086&DEV_8C82

Can anyone help me out with this? I'd appreciate it

Oh, sorry about that, thanks for moving my post

I use an msdn iso for modification called en_windows_xp_professional_with_service_pack_3_x86_cd_x14-80428.iso

there isn't any $OEM$ folder or anything on it so i'm assuming it's clean

I used nlite to integrate your modified RST 11.2 driver into it,
The integration worked but I still get a 7B BSOD when attempting to install

EDIT: would you like to see my txtsetup.sif file?

i checked

Intel(R) SATA AHCI Controller DEV_8C82 added by Fernando

nope, there is no WINNT.SIF file in either the original copy or the modified one

just that one