Hi, i have an asus laptop X551M and been trying to install windows xp on it for now 1 month with no luck, i beliebe it is bailtrail system,
but something different occurs me,when i go to bios and set IDE MODE the dvd drive wont be read and i cant boot from the cd, so i guess if i can get dvd drive to be detected in ide mode i can maybe install windows xp on it, thanks


btw the hard drive is read in ide mode but wont boot actual os which is win 10 it gives me some error

Thanks for your promt replay, can you link me to a guide to make a usb flash win xp bootable and also
boot from it in this complicated assus laptop X551M?

thanks again!!

not working, found the usb once in the bios, the first time, but it didnt boot, had an inacessible_boot_device error..
now cant find the usb in BIOS anymore

Hi all,

I'm new here.
Please solve my problem. new laptop I bought Acer Extensa 2530-P9GB, in the BIOS I found only one option that

in is mode, AHCI mode. But I want to install Windows XP , so I found the driver mod + signed first Intel drivers

Q11.2.0.1006 (dated 05/30/2012, re-mod and signed on 10/26/2015) , but the main problem is that after

complete the second part of Windows XP, it automatically restarts with the error blue screen of death. So please

help me
it supports:. Intel Corporation 8 series SATA AHCI controller-9C03

Please Help me

error stop: 0X000000A5 (0x00000002, 0x8A422C80,0x00000001,0x8A435C08)




PCI\VEN_8086&DEV_9C03&SUBSYS_111D1025&REV_04

PCI\VEN_8086&DEV_9C03&SUBSYS_111D1025

PCI\VEN_8086&DEV_9C03&CC_010601

PCI\VEN_8086&DEV_9C03&CC_0106

on Windows 8

Tried both pressed F5 or F7, and F5 in there, tried all the options, it comes to creating the partition to install and then hangs.
What else can I try???

Hi Fernando,

I have a slight issue when trying to import the drivers for Universal 32bit Intel RST ACHI+RAID driver v11.2.0.1006. I cannot see my chipset as I can see it in the screenshot you posted in your first post. See below what I see on my screen:


How do I get to see the driver as I see in your guide (Intel (R) 9 Series Chipset Family SATA AHCI Controller DEV_8C82 (added by Fernando))? As this is the device I see in Device Manager under IDE ATA/ATAPI controllers


As a final note - I tried adding all of them and burnt them to my DVD and tested installing and it wouldn't work. It threw me the error you get when it has no SATA AHCI compatibility again. I appreciate your time.

Edit- I have also tried enabling IDE mode which doesn't help. It just breaks booting into Windows 10
Second Edit - I identified the driver by seeing the DEV-8C82 even though it didn't say 9 Series etc. However it still doesn't work when I inject that into the bootable drive, it still throws me the SATA AHCI compatability bluescreen again.

Kind regards,
Ben

@Fernando

Hi Fernando, thanks for taking the time to reply.

Zitat von Fernando im Beitrag #582

---

After having successfully installed Windows XP according my guide (= start post of this thread), you will see the device named "Intel (R) 9 Series Chipset Family SATA AHCI Controller DEV_8C82 (added by Fernando)" within the "IDE ATA/ATAPI Controllers" section of the Device Manager.

---

Zitat von Fernando im Beitrag #582

---

You should not integrate the support of all listed Intel SATA Controllers,but just the matching one. Otherwise you may get a BSOD.

---

Zitat von Fernando im Beitrag #584

---

If you get a 0x0007B BSOD although having integrated the correct driver ("Universal 32bit Intel RST v11.2.0.1006 mod+signed by Fernando") and checked the correct Intel SATA AHCI Controller (DEV_8C82), you obviously haven't used a clean (= untouched) Windows XP image as source.

---

Zitat von Fernando im Beitrag #584

---

As long as you haven't changed the SATA mode within the BIOS (it has to be set to "AHCI"), your problem is not BIOS related.
Which BSOD message did you get while trying to get XP installed?

---