Forum - RE: ASUS X553M Intel(R) Atom (TM) SATA drivers for XP 32bit

#556 | RE: ASUS X553M Intel(R) Atom (TM) SATA drivers for XP 32bit datum

Thu Jul 14, 2016 3:05 am

Im talking about win xp which was installed in compatibility mode. Any of USB devices which are plugged in are not recognized and in device manager i see missing drivers for "USB Controller".
Deatils say:
PCI\VEN8086&DEV0F35&SUBSYS161D1043&REV_0E
PCI\VEN8086&DEV0F35&SUBSYS161D1043
PCI\VEN8086&DEV0F35&CC_0C0330
PCI\VEN8086&DEV0F35&CC_0C03

Came back from holidays but stil struggling with this laptop

reply

#557 | RE: ASUS X553M Intel(R) Atom (TM) SATA drivers for XP 32bit datum

Thu Jul 14, 2016 3:06 am (Last edited: Thu Jul 14, 2016 3:09 am)

Zitat von Fernando im Beitrag #555
Zitat von ivan_zg im Beitrag #553
Whih is the best way/tool/technique for editing multiple boot OS - Lets stick to MBR since Iam far away from GPT:)
This question has nothing to do with the topic of this thread.
If you want to avoid any problems with a multiple boot system, you should install the Operating Systems onto different Disk Drives (don't forget to unplug all the other ones except the target Disk Drive before starting the OS installation).
Zitat von ivan_zg im Beitrag #554
one more thing - cannot get USB to work...
About which specifc USB Controller and which OS are you talking?

Im talking about win xp which was installed in compatibility mode. Any of USB devices which are plugged in are not recognized and in device manager i see missing drivers for "USB Controller".
Deatils say:
PCI\VEN_8086&DEV_0F35&SUBSYS161D1043&REV_0E
PCI\VEN_8086&DEV_0F35&SUBSYS161D1043
PCI\VEN_8086&DEV_0F35&CC_0C0330
PCI\VEN_8086&DEV_0F35&CC_0C03

Came back from holidays but stil struggling with this laptop

reply

#558 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Fri Jul 29, 2016 6:08 pm

Hey, I integrated the modded DEV_0F23 drivers but the Windows XP installation still comes up with 0x0000007e acpi.sys

I have tried to press F7 but it after a while it comes up with 0x0000007b

reply

#559 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Fri Jul 29, 2016 7:00 pm

@ymg:
Welcome at Win-RAID Forum!

Zitat von ymg im Beitrag #558
Hey, I integrated the modded DEV_0F23 drivers but the Windows XP installation still comes up with 0x0000007e acpi.sys
I have tried to press F7 but it after a while it comes up with 0x0000007b

The ACPI problem has nothing to do with the integration of the appropriate Intel AHCI driver.
You have to choose the best matching ACPI option after having pressed F5 or F7 (my advice: try both options).
Note: Since your problem has nothing to do with the topic "Recommended AHCI/RAID and NVMe Drivers" I have moved your post into this better matching thread.

Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#560 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Jul 30, 2016 2:17 am (Last edited: Sat Jul 30, 2016 10:06 am)

Everything I do seems to not work. I have tried pressing F5 and F7 while installing the OS.

Here is the drivers on my device manager:

Here are the hardware IDs for the driver:

When I used Nlite I choose this one as it has the same device ID:

This screen is before any errors show up:

After the 0x0000007e bsod error shows up:

I then tried restarting again and pressing F5 this time when it says press F6 and it displays this screen:

I pressed the first option but it takes about 5 - 7 minutes before it loads up another bsod error 0x0000007b:

Then I chose "other" but this screen shows up and I don't really know what to do here:

So I really don't know what to do anymore. Also, I am using a bootable usb device to do all this. My laptop does not come with an internal CD drive.

EDIT by Fernando: Put all pictures into "spoilers" (to save space within this already very voluminous thread)

reply

#561 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Jul 30, 2016 9:58 am (Last edited: Sat Jul 30, 2016 10:00 am)

@ymg:
Regarding the ACPI issue I cannot help you, but the 0x0000007B BSOD indicates, that there may be a wrong or additionally integrated textmode driver within your bootable XP image.
Questions:
1. Where comes your source XP image comes from? Are you sure, that it has been an original (untouched) Microsoft XP SP2 or SP3 image? Is there a file name WINNT.SIF within the i386 folder of the source CD?
2. Did you really integrate just the listed "Intel(R) Bay Trail SATA AHCI Controller DEV_0F23", when you integrated the Intel AHCI driver into the XP image by using nLite?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#562 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Jul 30, 2016 4:03 pm

Zitat von Fernando im Beitrag #561
@ymg:
Regarding the ACPI issue I cannot help you, but the 0x0000007B BSOD indicates, that there may be a wrong or additionally integrated textmode driver within your bootable XP image.
Questions:
1. Where comes your source XP image comes from? Are you sure, that it has been an original (untouched) Microsoft XP SP2 or SP3 image? Is there a file name WINNT.SIF within the i386 folder of the source CD?
2. Did you really integrate just the listed "Intel(R) Bay Trail SATA AHCI Controller DEV_0F23", when you integrated the Intel AHCI driver into the XP image by using nLite?

I downloaded the ISO from Google drive. I do have other Windows XP ISO files but I haven't tried on the other ones.

It does have WINNT.SIF:

I did only integrate Intel(R) Bay Trail SATA AHCI Controller DEV_0F23 using nLite

reply

#563 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Jul 30, 2016 6:57 pm

@ymg:
The presence of the file WINNT.SIF is the proof, that the used source XP image has already been processed before.
Only users with a legally purchased original OS image get support within this Forum.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#564 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Jul 31, 2016 9:15 pm

Zitat von Fernando im Beitrag #563
@ymg:
The presence of the file WINNT.SIF is the proof, that the used source XP image has already been processed before.
Only users with a legally purchased original OS image get support within this Forum.

Alright, thanks for the help so far. I did manage to fix the problem. I realised I was trying to install a 32 bit operating system on a 64 bit machine. It seems I can't do that with Windows XP.

reply

#565 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Jul 31, 2016 10:05 pm

Zitat von ymg im Beitrag #564
I realised I was trying to install a 32 bit operating system on a 64 bit machine. It seems I can't do that with Windows XP.

That is not true. You can install a 32bit OS onto every 64bit capable machine.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#566 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Aug 06, 2016 7:32 am (Last edited: Sat Aug 06, 2016 7:39 am)

Zitat von Fernando im Beitrag #565
Zitat von ymg im Beitrag #564
I realised I was trying to install a 32 bit operating system on a 64 bit machine. It seems I can't do that with Windows XP.
That is not true. You can install a 32bit OS onto every 64bit capable machine.

Fernando, you forgot one important thing - so long as said machine have the IDE option for the SATA ports(under BIOS) or else XP won't install; like I've found out myself unless you've slipstreamed those RAID/ACHI drivers onto the install disc in which case it should work but since XP wasn't counting on newer systems, this may or may not work, just like for me. If said system doesn't have IDE option and only ACHI/RAID, well then you're gonna either have to slipstream it and hope that works, use a FDD for F6 install and hope that works or just give up....

Here, check how I went through to get XP x64 Pro installed(would be similar for 32-bit XP as well): [Solved] Problems to get XP x64 installed onto an Intel X79 system -> Used to be apart of this thread but Fernando moved it into its own thread. ☺

reply

#567 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Aug 06, 2016 12:18 pm

Zitat von TheNewGuy1 im Beitrag #566
Zitat von Fernando im Beitrag #565
You can install a 32bit OS onto every 64bit capable machine.
Fernando, you forgot one important thing - so long as said machine have the IDE option for the SATA ports(under BIOS) or else XP won't install

To be honest, I don't understand what you mean. What has your reply to do with the quoted text?

Users with a modern Intel chipset system have at least 2 options to get Windows XP (32bit or 64bit) installed and running in AHCI mode:
a) Requires more time, but is the safer option:
The appropriate driver inclusive the support of the specific Intel SATA AHCI Controller has to be slipstreamed into the XP image according >this< guide.
b) Easier, but much riskier option:
XP x86 resp. XP x64 can be installed in IDE mode (requires such BIOS setting option) by using the original OS image. Once the OS is up and running, the SATA mode has to be switched to "AHCI" according >this< guide.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#568 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Aug 06, 2016 2:40 pm (Last edited: Sat Aug 06, 2016 4:55 pm)

Zitat von Fernando im Beitrag #567
Users with a modern Intel chipset system have at least 2 options to get Windows XP (32bit or 64bit) installed and running in AHCI mode:
a) Requires more time, but is the safer option:
The appropriate driver inclusive the support of the specific Intel SATA AHCI Controller has to be slipstreamed into the XP image according >this< guide.
b) Easier, but much riskier option:
XP x86 resp. XP x64 can be installed in IDE mode (requires such BIOS setting option) by using the original OS image. Once the OS is up and running, the SATA mode has to be switched to "AHCI" according >this< guide.

If in BIOS there is no IDE option for the SATA ports, then you can't install XP, unless the motherboard manufacturer comes with ACHI/RAID drivers that work for XP.

With a), you'll have to try your luck as I wasn't able to install it with those AHCI drivers slipstreamed, so had to install in IDE mode and then install those ACHI drivers via Device Manager and then switch the SATA port type to ACHI of course in BIOS or else it will BSOD.

For b), well that's the thing, when newer and newer tech comes out, they will forgo older tech and connections. Take for example the PATA connection, I had a few PATA CD/DVD/HDDs/FDD I was willing to recycle but since they don't have them.....and soon IDE option will disappear from the BIOS too which means you won't be able to install XP on any newer systems....unless of course you can manage to hack/mod the drivers(or there are still working compatible drivers for XP, but I wouldn't count that by the time 10 becomes mainstream or old news) so you get IDE equivalent working under XP or hack the ACHI/RAID drivers for win10(say when win10 is the oldest windows os in use (in 2030 or something) just like XP is now(there's actually a recent pie graph of the various OSs people still currently use, and they ranged from windows 98(yes there was like about 0.01% of the population they surveyed that was still using windows 98 at this day and age), to win10 along side MAC OS and Linux/Ubunto and all those - XP had like 10% of the share, whilst 7 still had 45% or so and win10 15% or so; I also forget the site this was on but I remember those basic stats

Though I'm not sure how many people they surveyed.........) or something so that they work for XP as well somehow....

EDIT by Fernando: Unneeded part of the fully quoted post and blank lines removed (to save space)

reply

#569 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sat Aug 06, 2016 5:04 pm

Zitat von TheNewGuy1 im Beitrag #568
If in BIOS there is no IDE option for the SATA ports, then you can't install XP, unless the motherboard manufacturer comes with ACHI/RAID drivers that work for XP.

That is simply not true, because the required AHCI/RAID drivers are available (maybe the related INF file has to be customized).

Zitat von TheNewGuy1 im Beitrag #568
With a), you'll have to try your luck as I wasn't able to install it with those AHCI drivers slipstreamed

Then you have either used a previously customized OS image as source or you have done something wrong while slipstreaming the AHCI driver.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#570 | RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD datum

Sun Aug 07, 2016 6:41 am

Zitat von Fernando im Beitrag #569
Zitat von TheNewGuy1 im Beitrag #568
If in BIOS there is no IDE option for the SATA ports, then you can't install XP, unless the motherboard manufacturer comes with ACHI/RAID drivers that work for XP.
That is simply not true, because the required AHCI/RAID drivers are available (maybe the related INF file has to be customized).

No, I'm saying hypothetically(as an example), and not suggesting my case with the Rampage IV Extreme board which obviously has a switch for IDE mode and ACHI/RAID.

Zitat von Fernando im Beitrag #569
Zitat von TheNewGuy1 im Beitrag #568
With a), you'll have to try your luck as I wasn't able to install it with those AHCI drivers slipstreamed
Then you have either used a previously customized OS image as source or you have done something wrong while slipstreaming the AHCI driver.

The image I have is the official untouched(or at least I think it's untouched) Microsoft windows XP x64 Pro disc with Service Pack 1(I got it from DreamSparks since I was a student at the time for free so effectively I have a genuine copy of said OS - no pirating here! :P). All I have done is integrate Service Pack 2 and the post updates after that(including some of the newer 2k3 ones which applies for XP x64(as apparently it was built from 2k3) as well but weren't released for it, because support for it was stopped) since there is no Service Pack 3 for x64 XP with nLite. And I have not done anything wrong with slipstreaming the ACHI driver via nLite, as followed the correct procedure.......

reply

Please enter a reason for warning.