I always have to hit F7 during setup to avoid 0x000000A5 ACPI BSOD (When setup ask me to hit F6 if needed additional drivers)
ACPI settings in BIOS can't be changed.

When hit F5:
- C 486 compatible
- Other (need insert FDD with drivers)

Zitat von Fernando im Beitrag #515

---

@crackintosh: What happens, when you choose the option "C 486 compatible"?

---

Zitat von Fernando im Beitrag #509

---

@Scambler:
Welcome at Win-RAID Forum!
Your reported problem is a wellknown one and caused by the integration of Microsoft's Service Pack 3 into an XP SP2 image.
Solution: The CD Key will be accepted, if you either use an original Windows XP SP3 as source or install XP SP2 and run the Setup.exe of the SP3 later.
Good luck!
Dieter (alias Fernando)

---

Good news... Special UEFI Bios for XP

and another solution to run XP on ASUS MB with Z97 chipset: Startech PCI-Express IDE-Adapter

Helpful information to find possible causes of the Stop 0x000000A5 BSOD: A5 BSOD link info

@Fernando:
1. But then i would see a different code on the computer screen? Like i would type in W2Q4T-....-..... And in the screen would appear an totally different CD-code, but this doesn't happen. But I have changed the language settings but nothing changes, the key-code I type is showed correctly on the screen.

2. Jep.... did this on my laptop with windows 7 on it.


I have a Intel DX79SI motherboard, and I have read that other people with a X79 motherboard have successfully installed XP on there PC. So it is possible but I can't get it to work and it's eating on me.
Is it possible that i install the XP with SP1? I just need a solution to get the keyboard to work with SP1 but I can't find anyone with the same issue

Hello I am new here and i have been reading about the topic.

i have laptop HP probook 440 G2
Intel(R) 8 Series Chipset Family SATA AHCI Controller
hardware ID PCI\VEN_8086&DEV_9C03&SUBSYS_2247103C&REV_04

I did the installation, i activate windows xp by integrating the controller v11 by Fernando, but after I no longer start the laptop and a stop appears. someone I can say that I am doing wrong.

Thanks, Regads!

Hello everyone,

I have a server with a Tyan S5167 Board, where I have to play XP, otherwise other drivers, etc. do not work. Now I want to install XP in ahci mode. Only no driver wants to operate. Have Tyan already written. The answer board to old, no support. I just wanted the board driver as download?
Also have to test times Win7 partly filled and as works of ahci driver. With nlite been the driver in the installation CD integrated, nobody works. Either I do something wrong or I really have the wrong drivers.

I send times in the hope that you help me can read the data. Currently I have tried this driver SATA_Intel_v7.0.0.1020

Maybe someone has the same board?

Greetings Klaus

(translated by Google)[[File:Tyan Computer S5167.TXT]]