Thank you very much.

I need help integrating driver for Dell poweredge R230 with Intel C236 chipset AHCI/Raid .
help please , thank you.

Hi thanks for quick respons,
it is running currently in RAID mode,
I had tried installing with "Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando (2)" integrated using nlite both in RAID mode and AHCI,
getting an error :
iaStorB.sys is missing

Regards,
Guy.

Hello Fernando, excuse my english of google . I'm need your help:

I'm creating a CD of Windows XP SP3 with the AHCI/RAID drivers posted here and some of this post. I have tried to probe the ISO in the Virtualbox 5.0.10r and VMware 12.1.0 but in the installation launch bluescreen (0x000000F4 and 0x0000007B). I read about the problem and He says it is for the installation directly in SATA. I'm not sure if I'm doing something wrong, so I need your wise advice

By the way, I have Windows 10 - 1511 Version. That may be the problem? Thanks for the help.

Hello @Fernando

Zitat

---

1. Usage of an original (untouched) XP CD with integrated SP2 or (better) SP3 as source

---

I'm using a Windows XP SP3 for the MSDN (I suppose):

My ISO image:

MD5: 7149A9DD2F13E00CE54DF01FF7A69A59
SHA1: A47603256D7645A2F2788466153FFCD058F77C56

Zitat

---

2. Integration of just 1 single driver (AHCI or RAID)

---

When you talk about this, I can not select multiple drivers from different manufacturers?

Zitat

---

3. Choice of the correct Intel SATA AHCI resp. RAID Controller while doing the textmode integration

---

I'm choice ALL Intel drivers downloaded from the posts that I mentioned (of course, for Windows XP)

Shortly... and according to what you say, I can not make a Windows XP SP3 with different drivers SATA??? because I like a WinXP for install in the most of computers, no need to change BIOS settings or, alternatively, if it is not possible to change these settings.

HEY I have Shuttle All in one X50V4, and as i downloaded the motherboard manual from the official website.. the south bridge was N/A
i screenshotted the motherboard manual can u please help me identify which drivers should i use, thanks in advance

Hi Fernando!

Compliments for this forum and your appreciable commitment. I'm currently trying to create an installation copy of WinXP Pro with nLite and I'd like to include as many drivers as possible (not all the driver packs, but the most needed). It seems that MassStorage, Chipset and LAN should be the best choice (even because I'm attempting to not exceed a 700 MB cd). But I'm concerned about making this copy work both in real and virtual machine (we all know how it's convenient to have WinXp running in VirtualBox, especially with the generous hardware resources of these days).

In particular, it's been reported (about 4 years ago) that it's impossible to integrate both the MassStorage pack and your modded drivers (32 and 64 bit MSM AHCI & RAID) without getting a BSOD in VirtualBox (SATA mode). It seems that the integration process ends successfully: firstly, integrating your drivers via nLite (selecting all the available controllers) and then integrating the MassStorage pack via DriversPack BASE (as it's commonly suggested for integrating any of the driverpacks in driverpacks.net), selecting again all the available controllers. But then, once in VBox a BSOD appears.
Perhaps, there was a mistake in the order of the integration of the drivers. Perhaps, the SATA drivers, included in the MassStorage pack, had overwritten some of yours, vanishing the first integration. Is it possible something like that?

Unfortunately, I cannot test on my own because I don't have a SATA controller at the moment. The installation copy of WinXP that I'm trying to create is intended to run on PCs with SATA controller that I, or someone I know, could have in the near future.
As far as you know, could it be possible to integrate both MassStorage pack and your modded drivers without getting any error when running in SATA mode in VirtualBox? If not, having the necessity to run WINXP in VBox, I should create another installation ISO with only your modded drivers, unless there is another program like VBox but able to manage SATA mode without giving any error.
Please I need your suggestions, especially for successfully having WinXP working in real and virtual machine (SATA mode) with just 1 installation cd.

Hi Fernando!

Compliments for this forum and your appreciable commitment. I'd created an installation copy of WinXP SP3 with nLite and I'd used your file (>Universal 32bit Intel RST textmode driver v11.2.0.1006 mod+signed by Fernando< (>MIRROR<)) to do it .
My computer is ASUS intel core i5-4200U. 1.6GHz and my Intel SATA Controller is (Intel(R) 8 Series Chipset Family SATA AHCI Controller).
First my Intel SATA Controller is not appeared in nLite windows. Furthermore, the installation of WinXP SP3 stopped in blue screen and I cannot continue the installation.
I need your help.