Forum - RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD

#376 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sat Jun 06, 2015 7:17 pm

Zitat von Taro im Beitrag #375
I also happy to remove Kingston M.2 if it not compatible with XP, use standard HDD or SSD instead. How to make the WD HDD to work with your AHCI mod inf?

Yes, I recommend to remove the M.2 SSD.
The XP CD, which you have created, is usable with any HDD or SSD, which is connected to any of the Intel SATA ports.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#377 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Mon Jun 08, 2015 6:08 pm

Dear Fernando,

After I removed Kingston M.2 SSD. My new PC still can't choose any ACPI mode. May the new board is too new (Asus Z97i-Plus). So, every error still same. Finally, it success only IDE and Standard PC installed. IDE can accept but for no ACPI can't. It require turn off PC by push the switch all the time.

I give up now. Return to previous board (AsRock FM2A88-ITX with A8 CPU) no action require for this board. It still fully support XP. Thank you very much for your work on the earth. That's very appreciate even I'm not success to go with you. But this is awesome, really awesome that XP still can go far like this.

reply

#378 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sat Jun 20, 2015 12:18 am

Mr.Fernando
Actually,i have a problem , i am trying to install windows xp sp1 (32bit) on this computer
http://ark.intel.com/products/53426/Inte...-Cache-3_30-GHz
also,windows setup is starting,loading driver and boom,blue screen about pcy.sys
***stop 0x0000007E ( oxc 0000005, oxf9a380bf, oxf9e84208, oxf9e834208, 0xe9e83f08

*** PCI.SYS address f9a380bf base at f9a31000, date stamp 3b7d8ssc
xp sp2 and sp3 work,but i need sp1,what cand I do?
thanks.

reply

#379 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sat Jun 20, 2015 1:02 am

@ fernandonumber1 (that's a funny name ):
Welcome at Win-RAID Forum!

Zitat von fernandonumber1 im Beitrag #378
xp sp2 and sp3 work,but i need sp1,what cand I do?

Probably nothing. Windows XP with integrated SP2 os SP3 is the required source to get any modern AHCI driver successfully integrated.
Why do you need XP SP1? That doesn't make any sense for me.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#380 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Jun 28, 2015 2:42 pm

Hi Fernando

I have tried to follow your post on slipstreaming my drivers for a XP Tablet 2005 install on a toughbook, but I can't get past the first stage of telling the program where the source files are extracted to, It does not matter what Xp OS i try Ntlite beta still pops up the same error below that its an invalid path

Am I doing something wrong

Gizz

reply

#381 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Jun 28, 2015 3:09 pm

@ Gizzburn:
Welcome at Win-RAID Forum!

You need an original and legal XP XD as source. Then you should simply copy its content into a folder like C:\XP.
I am sorry, but we do not support users, who downloaded their OS via filesharing.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#382 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Fri Jul 03, 2015 5:36 pm (Last edited: Fri Jul 03, 2015 5:41 pm)

Hi Fernando
Thanks in advance for your support

Im stuck on the same issue as here
[Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD (18)

setup
Asus h97-plus
i3 4330
trying to install Xp64bit but of course no way to get out from BSOD from ACPI

As I read...from January have you find out any way to install XP?
Running on IDE mode
Tried all type (single, multi, other) of ACPI during XP setup hitting F7 key but no way

Thank you

reply

#383 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Fri Jul 03, 2015 6:11 pm

@ R3C:
Welcome at Win-RAID Forum!

Zitat von R3C im Beitrag #382
trying to install Xp64bit but of course no way to get out from BSOD from ACPI

Have you ever tried to press F5 instead of F7?

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#384 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 11:58 am (Last edited: Thu Aug 06, 2015 11:59 am)

Hi
Please Help me to install this drivers for Xp .

PCI\VEN_8086&DEV_0F23&REV_0E
PCI\VEN_8086&DEV_0F23
PCI\VEN_8086&CC_010601
PCI\VEN_8086&CC_0106
PCI\VEN_8086
PCI\CC_010601
PCI\CC_0106

*************
LENOVO S20

Thanks

reply

#385 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 12:35 pm

@ Masoud:
Welcome at Win-RAID Forum!

Zitat von Masoud im Beitrag #384
Please Help me to install this drivers for Xp .
PCI\VEN_8086&DEV_0F23
PCI\VEN_8086&CC_010601
PCI\VEN_8086&CC_0106

According to the HardwareIDs your LENOVO S20 has a Bay-Trail Chipset, which is natively not supported by any Intel AHCI drver.
Neverheless I have tried to modify the latest XP compatible Intel RST AHCI driver v11.2.0.1006 so, that it may support even your Intel Bay-Trail SATA AHCI Controller with the DeviceID DEV_0F23, but I am not sure, whether it will work or not.
You can find the download link attached to >this< post.
Please report here, if you succeeded with the integration of this driver into a Windows XP CD and the later XP installation in AHCI mode.

Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#386 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 1:45 pm

Hi
Thanks for your Answer.
Sorry , I can not install with that drivers So
https://www.dropbox.com/s/mhfx8bq9q60ov5b/11.jpg?dl=0

reply

#387 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 1:55 pm

Zitat von Masoud im Beitrag #386
Sorry , I can not install with that drivers So
https://www.dropbox.com/s/mhfx8bq9q60ov5b/11.jpg?dl=0

What does that mean?
Have you tried to integrate the modded 32bit driver I had attached? If yes, what happened?
What do you expect from my side?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#388 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 2:10 pm

I copy All files to floppy Drives and install win Xp With Flash Memory and USE F6 to add Sata Driver from flopy.

and chosse { Bay Trial AHCI 0F23} , But BLUE SCREEN Come again!!! ERR
Thanks

reply

#389 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 2:48 pm

Zitat von Masoud im Beitrag #388
I copy All files to floppy Drives and install win Xp With Flash Memory and USE F6 to add Sata Driver from flopy.
and chosse { Bay Trial AHCI 0F23} , But BLUE SCREEN Come again!!! ERR

What about your used XP CD source? Is it "clean" (= untouched original MS software) with integrated SP3?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#390 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Aug 06, 2015 4:11 pm

Yes , I used Original Xp CD But At now Try to Check with Another CD.

reply

Please enter a reason for warning.