Forum - RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD

#31 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Wed Dec 11, 2013 12:52 am

Zitat von Aersson im Beitrag #30
PCI\VEN_8086&DEV_27C0&SUBSYS_01D21028&REV_01
PCI\VEN_8086&DEV_27C0&SUBSYS_01D21028
PCI\VEN_8086&DEV_27C0&CC_01018F
PCI\VEN_8086&DEV_27C0&CC_0101

Is this it?

Yes, the Intel SATA Controller of your system is listed as "Intel(R) N10/ICH7 Family Serial ATA Storage Controller - 27C0" within the file named "ich78id.inf", which you can find within the folder named "All" of the extracted Intel Chipset Device Software ("Intel INF Update Utility"). That means, that your SATA Controller is running in IDE mode.
Since your Intel SATA Controller is neither running in AHCI nor in RAID mode, none of Intel's AHCI/RAID drivers can be used by the OS. So you should not try to load (F6) or to integrate any Intel textmode driver, when you are going to install Windows XP.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#32 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Wed Dec 11, 2013 5:20 pm

Hmm, ok.

The Bluescreen i get lead me to believe there was something wrong with the drivers.

This is the error i get when trying to install: 0x0000007B (0xF78D2524, 0xc00000034, 0x00000000, 0x00000000)

Man, I have spent days and nights trying to solve this problem. Was hoping it had something to do with the drivers.

But if it's not, then this is not the place to continue my search.

Thank you for your help man, It's a good guide. Even though i don't understand so much about all this! :P

reply

#33 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Wed Dec 11, 2013 5:39 pm

@ Aersson:

You probably will prevent the 0x0000007B BSOD by doing the following:

Make sure, tat you are booting off an original = absolutely untouched Windows XP CD with integrated SP2 or SP3. There should be no file named WINNT.SIF within the i386 directory!
Unplug all devices except the system drive and the bootable Windows XP media while trying to install the OS.
Don't use any overclocking BIOS settings.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#34 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sat Dec 14, 2013 5:09 pm (Last edited: Sat Dec 14, 2013 5:30 pm)

I need IRST XP drivers for "Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10" I am having a Sony Laptop with HM76 chipset. I tried many Drivers but did not work and your custom drivers show empty when unzipped or error.

PCI\VEN_8086&DEV_1E10&CC_0604
PCI\VEN_8086&DEV_1E12&CC_0604
PCI\VEN_8086&DEV_1E13&CC_0604
PCI\VEN_8086&DEV_1E22

Without IRST Drivers it gives 0x0000007B BSOD.
When I tried nLite system shuts downs after the Windows Starting Installation

reply

#35 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sat Dec 14, 2013 5:45 pm (Last edited: Sat Dec 14, 2013 5:58 pm)

@ baid:
Welcome at Win-RAID Forum!

Zitat von baid im Beitrag #34
I need IRST XP drivers for "Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10" I am having a Sony Laptop with HM76 chipset.

This Intel Chipset Device has nothing to do with the AHCI/RAID drivers, which are the topic of this thread.
If any of the Intel(R) 7 Series Chipset devices shouldn't been properly detected and supported by the XP Device Manager, please download the attached file, unzip it and navigate from within the Device Manager to the folder.

Zitat
I tried many Drivers but did not work and you custom drivers show empty when unnzipped.

Which of my "custom drivers" seemed to be empty when unzipped?

Regards
Fernando

EDIT:

Zitat
Without IRST Drivers it gives 0x0000007B BSOD.
When I tried nLite system shuts downs after the Windows Starting Installation.

I suspect, that you didn't check the correct Intel SATA AHCI or RAID Controller of your system during the nLite textmode driver integration procedure.
Which one did you highlight?
If you should be able to boot into any Windows OS (Vista, Win7, Win8 or Win8.1)), please give me the HardwareIDs of your currently working Intel SATA Controller. Open the "IDE ATA/ATAPI Controllers" or - if applicable - "Storage Controllers" section of the Device Manager, do a right click onto the listed Intel SATA Controller and choose the following options: "Properties" > "Details" > "Property" > "HardwareIDs".

Fernando has attached files to this post

Intel 7-Series Chipset Devices INF Files Set v9.4.0.1027 for XP.rar

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#36 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Dec 15, 2013 6:19 am (Last edited: Sun Dec 15, 2013 6:31 am)

Intel 7-Series Chipset Devices INF Files Set v9.4.0.1027 for XP.rar has the file "PantCore.inf" which contains the drivers I require by how do I integrate them into my XP, I tried pointing it but I got it in PNP mode instead of TXT mode.

Also the laptop copies all hardware stuff and when it says Setup is Starting Windows, then Welcome to Setup "Enter=Continue" and plump it switches off....

reply

#37 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Dec 15, 2013 10:20 am (Last edited: Sun Dec 15, 2013 10:20 am)

Zitat von baid im Beitrag #36
Intel 7-Series Chipset Devices INF Files Set v9.4.0.1027 for XP.rar has the file "PantCore.inf" which contains the drivers I require by how do I integrate them into my XP, I tried pointing it but I got it in PNP mode instead of TXT mode.

The Intel Chipset Devices INF files are often named "Intel Chipset Drivers", but they aren't drivers at all. There is no need to integrate these INF files (Windows XP Setup can be installed without them). Nevertheless you can integrate the INF files in PnP, but not in TXT mode (a file named TXTSETUP.OEM is requred, but not available for these INF files).

Zitat
Also the laptop copies all hardware stuff and when it says Setup is Starting Windows, then Welcome to Setup "Enter=Continue" and plump it switches off....

This behavior has nothing to do with a missing Intel Chipset Device INF file.
Please check the SATA mode and the SATA Controller sort of your laptop.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#38 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Dec 15, 2013 1:21 pm

My laptop model is from India Sony SVE1513CY/N. I need to install XP on this.

reply

#39 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Dec 15, 2013 1:54 pm

Zitat von baid im Beitrag #38
My laptop model is from India Sony SVE1513CY/N. I need to install XP on this.

If you want to install Windows XP and you do not succeed by booting off the original XP media (CD or USB drve), you have to search for the required AHCI or RAID driver.
You are on the absolute wrong path with the Intel chipset device INF files.
Once more I try to ask you: Which OS was running, when you bought the Sony laptop? Can you still boot into that OS?
If yes, do it and check the HardwareIDs of the on-board SATA Controller.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#40 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Mon Dec 16, 2013 7:40 am

I got these by installing Windows 7 Pro.
PCI\VEN_8086&DEV_1E10&CC_0604
PCI\VEN_8086&DEV_1E12&CC_0604
PCI\VEN_8086&DEV_1E14&CC_0604
PCI\VEN_8086&DEV_1E22

I need to install XP

reply

#41 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Mon Dec 16, 2013 9:05 am (Last edited: Mon Dec 16, 2013 9:05 am)

Zitat von baid im Beitrag #40
I got these by installing Windows 7 Pro.
PCI\VEN_8086&DEV_1E10&CC_0604
PCI\VEN_8086&DEV_1E12&CC_0604
PCI\VEN_8086&DEV_1E14&CC_0604
PCI\VEN_8086&DEV_1E22

You have already posted these HardwareIDs in post #34 and I had replied, that they do not belong to any Intel SATA AHCI or RAID Controller.
To find out the HardwareIDs of the in-use Intel SATA Controller, you must open the "IDE ATA/ATAPI Controllers" (resp. the "Storage Controllers") section of the Device Manager, do a right click onto all listed Controllers (with the word Controller" in their name) and then choose the options "Properties" > "Details" > "Property" > "HardwareIDs".

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#42 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Dec 19, 2013 3:18 pm

Hello Fernando

I downloaded your driver for the intel 8-series and tried to install it via 'F6' in a Windows XP installation. The setup regonized the drivers but didnt use them.

The OS which was installed before is Windows 7 Pro.
Hardware IDs for the sata controller are:
PCI\VEN_8086&DEV_8C02&SUBSYS_78171462&REV_05
PCI\VEN_8086&DEV_8C02&SUBSYS_78171462
PCI\VEN_8086&DEV_8C02&CC_010601
PCI\VEN_8086&DEV_8C02&CC_0106

I searched the mainboard-manufactor's website (MSI) but I didnt find a driver for Windows XP.

Should I use nLite for installing Windows XP or do you think it should work with the F6 implementation.

Greetz

Rumbeler

reply

#43 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Thu Dec 19, 2013 3:50 pm

@ Rumbeler:
Welcome at Win-RAID Forum!

Zitat von Rumbeler im Beitrag #42
I downloaded your driver for the intel 8-series and tried to install it via 'F6' in a Windows XP installation. The setup regonized the drivers but didnt use them.

Which driver did you try to install via F6 and which of the listed Intel SATA Controllers did you choose?

Zitat
The OS which was installed before is Windows 7 Pro.
Hardware IDs for the sata controller are:
PCI\VEN_8086&DEV_8C02&SUBSYS_78171462&REV_05
PCI\VEN_8086&DEV_8C02&SUBSYS_78171462
PCI\VEN_8086&DEV_8C02&CC_010601
PCI\VEN_8086&DEV_8C02&CC_0106
Should I use nLite for installing Windows XP or do you think it should work with the F6 implementation.

The textmode driver integration is the better option.
My advice: Integrate the "Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando" and check just the listed "Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_8C02 (added by Fernando)", when you get the nLite textmode driver popup.

Good luck!
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#44 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Dec 29, 2013 3:47 am (Last edited: Sun Dec 29, 2013 3:59 am)

Hello!
Fernando, thanks for a well-detailed solution.
However i came with a problem and im hoping that you'll be able to solve it.
I got a new laptop to prepare for work and i've been asked to install win xp on it. It had some kind of ubuntu installed from shop. I managed to install win 7 but cannot install xp.
Problem is, that when windows setup loads (i boot from usb stick) the only partition/drive that is visible is that usb stick. The HDD of 500gb seperated in 2 by half is invisible. Win 7 was succesfully installed and everything works there.
laptop: Packard bell TE69HW, mainboard EG_50HW. Hardware id's in dev.man.:
PCI\VEN_8086&DEV_9C03&SUBSYS_07751025&REV_04
PCI\VEN_8086&DEV_9C03&SUBSYS_07751025
PCI\VEN_8086&DEV_9C03&CC_010601
PCI\VEN_8086&DEV_9C03&CC_0106
In bios menu sata operation is only ahci. Didn't find any option to disable it too.
I integrated >Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando< into windows install cd but the partitions weren't visible too.
Used diskpart to mark partition active - didn't help. Tried to shrink one volume to 11gb - didn't help.
Last steps were integrating different drivers of that package mentioned above and.. im out of ideas :)
Now last thing i do before i go to sleep is insert drivers into newly downloaded clean win xp iso.. if this doesn't work then i'll continue tomorrow.
Maybe there's something i missed or did wrong.. Any help is appreciated!

EDITED: new copy of windows worked!
I used wintoflash to install iso to usb stick and there HAD to select system FAT 16 like i found in this forum page: http://wintoflash.com/forum/viewtopic.php?f=10&t=298
Again, i thank you, Fernando, for the drivers and detailed guide. Cheers!

reply

#45 | RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD datum

Sun Dec 29, 2013 10:04 am

@ paulwh:

Welcome at Win-RAID Forum!
It is fine, that you were able to solve your problem yourself.

Happy New Year!
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.