Zitat von Fernando im Beitrag #255

---

Zitat von viliusgti im Beitrag #254

---

So how to instal windows xp onto Intel 8?

---

The installation of Windows XP onto an Intel 8-Series Chipset system doesn't make any sense for me.
If you want to do it nevertheless, these are the steps:

1. Create a Windows XP SP3 CD with integrated "Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando" according to the start post of this thread.
   Important:
   a) The used XP CD source has to be untouched!
   b) When you get the nLite textmode driver integration popup window, you should only highlight the correct on-board Intel SATA AHCI resp. RAID Controller!
2. Disable CSM within the BIOS and boot off the created XP CD in LEGACY mode (creating a Master Boot Record).
3. When prompted to hit F6, hit F5 instead and choose the suitable ACPI mode.

---

hai fernando, i have HP 240 g2 core i3 3110m, with HM76 chipset and intel 7 series sata achi controller and i want to instal win xp sp 2 64bit. i follow you instruction to integration install ache/raid to windows xp. create iso, burn with elite and boot,success format and copy file to hdd, but when win xp loading i got BSOD B7 ? CAN U HELP ME ? sorry for my english

Hi everyone,

I have a Windows XP 32bit installation that currently runs in IDE mode, and I want to update the drivers so it runs in AHCI mode instead. Currently when I change the setting from IDE to AHCI in the BIOS, Windows crashes on boot with a "STOP 7B" error.

I attempted to install these drivers - Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando (corrected at 08/26/2014) - roughly following this guide - http://www.blah-blah.ch/it/how-to-s/enable-ahci/ - but none of the drivers listed match my device ID. My motherboard uses the Intel H97 chipset (Asrock H97M-Pro4). The device ID for the "Standard Dual Channel PCI IDE Controller" is DEV_8C80.

I noticed the list contains "Intel(R) 9 Series Chipset Family SATA AHCI Controller", DEV_8C82 and DEV_8C83, which I think are the right drivers, but given the device IDs don't match what I'm seeing in device manager, I was worried if I installed them my system might stop booting all together :(

If someone could tell me where I'm going wrong and point me in the right direction, it would be greatly appreciated.

Cheers!

my id is below:

PCI\VEN_8086&DEV_0F23&SUBSYS_21DE103C&REV_0E
PCI\VEN_8086&DEV_0F23&SUBSYS_21DE103C
PCI\VEN_8086&DEV_0F23&CC_010601
PCI\VEN_8086&DEV_0F23&CC_0106

and I can't instal Windows XP.

Is the "Universal 32bit Intel RST AHCI & RAID driver v11.2.0.1006 mod by Fernando.rar" included the usable AHCI for my ID?

Thank you very much!

Hello, Fernando!
First of all, thank you for your detailed instructions! I managed to install Windows XP x86 on a system with Sabertooth z97 Mark 2 motherboard.

For anyone who faces difficulties with the same motherboard,
1) I integrated Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando (Sabertooth z97 Mark 2 SATA controller's device id is 8C82),
2) in BIOS, switched "Launch CSM" to "Enabled", all sub-options to "Legacy OPROM only" or "Legacy OPROM first",
3) used an external USB CD-Drive, connected to USB 2.0 port,
4) pressed F5 (or F7) when setup prompted to press F6 - a menu of HAL options appears with several options. I picked "Standard PC". However, "MPS Multiprocessor" seems to work either.

If "ACPI multiprocessor" or "ACPI uniprocessor" is chosen, BSOD appears with an error "0x000000A5 0x000000000000000D 0xFFFFFADF3A1AF010 0x000000004449555F 0x0000000000000000" (error is concerned with ACPI and is described in http://support.microsoft.com/kb/314830).


But this was not my final goal: i'm trying to install XP x64. I tried two different original images of XP x64 (with SP1 and SP2) and 2003 x64, and here a problem is hidden. In F5/F7 HAL menu, only "ACPI multiprocessor", "ACPI uniprocessor" and "Other" options are present, ACPI leading to the same BSOD with A5-error and Other requires for a floppy. So I cannot chose "Standard PC" or "MPS Multiprocessor".
In XP x86 and 2003 x86 these options exist.

Do you know any method to include options "Standard PC", "MPS Multiprocessor" into x64-OS setup?

Hello..Mr. Fernando,

I am having problem installing window xp 32 bit regarding the sata driver. my laptop is lenovo G40-80, window 7-64 bit, 4G Ram, Gpu AMD Radeon R5 M230,Chipset Intel(R) 9 Series Chipset Family SATA AHCI Controller. I have download the driver from your forum. Which is:>Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando< (>MIRROR<).

Then I integrate the sata driver using nlite software to the xp installation file. During window xp 32 bit loading in my laptop. It does not detect the sata driver that i integrate with the installation file. Does the sata driver suitable for my laptop?. Please Help me.

Mr Fernando,

I have check the device id and the sata driver that i download were not matching or suitable. My device id is:

PCI\VEN_8086&DEV_9C83&SUBSYS_390B17AA&REV_03
PCI\VEN_8086&DEV_9C83&SUBSYS_390B17AA
PCI\VEN_8086&DEV_9C83&CC_010601
PCI\VEN_8086&DEV_9C83&CC_0106

I have tried to download from intel website but do not find this sata driver and also some other website. Mobile 5th Generation Intel Core SATA Controller 9C83.
I am out of idea. Any idea where can I get this sata controller?

Thank you.

Dear Mr fernando,

I have tried to install win xp using the sata driver. I have hit the F5 and F7 button during installation.
The window loading is okay but when it goes to the phase of window setup, it got jam. The window installation was fail.

Mr Fernando,

1.Sorry got jam what I mean is it get stuck at the process.

2. The error massage that I get is :



3. I think the drive system still not detect the xp setup. How can i know it?

4. I think the ACPI that you mean which i understand are the bios setting is the same thing. Correct me if im wrong.

At the bios setting I have set the controller in ahci mode.