Zitat von viliusgti im Beitrag #241

---

My pc is 64bit. I downloaded 32bit driver for OS.

---

It doesnt matter, whether your PC is 64bit capable or not, you have to load/insert 32bit drivers for a 32bit OS like Windws XP.

Zitat

---

O.T. How insert ahci drivers into Windows 7 CD?

---

You can integrate any driver into a Win7 DVD by usng a tool like NTLite, but that is not needed at all, because Win7 has an in-box AHCI driver, which supports (nearly) all AHCI Controllers.

Zitat von viliusgti im Beitrag #243

---

When I tried to install Windows 7, emerge note that drives not found, cancel instaliation, so Win7 doesn't have drivers for this rare Sata or I don't know.

---

Please post the chipset of your PC and the SATA mode (IDE/AHCI/RAID) of the SATA port you are using. If you should be able to boot into any Windows OS, it would be fine to know the HardwareIDs of your in use SATA Controller (right click onto it > "Properties" > "Details" > "Property" > "HardwareIDs").

Zitat

---

Nlite don't work for me with win7 64bit

---

The tool nLite is only designed for Windows 2000, Windows XP and Windows Server 2003, but the new tool named NTLite will work with Windows 7 x64. For details look >here<.

Zitat von viliusgti im Beitrag #245

---

Motherboard name is H81M-P33. On box is written Chipset H81, 2SATA3.

---

The SATA Controller types (IDE/AHCI/RAID) of your Intel 8-Series chipset mainboard should be natively supported by Windows 7 x64.

EDIT: If your SSDs/HDDs are not detected by the Win7 Setup, I recommend to check the BIOS settings.

Zitat von viliusgti im Beitrag #247

---

I done priority:
1.USB CD DVD
2. Hard disk Toshiba

---

Is this the HDD, where you want to get the OS installed?
If yes, is it a "normal" SATA HDD resp. SSD and not an eSATA one?

Zitat

---

What do else I have to check?

---

You should check,
a) to which SATA port/Controller the future system drive is connected,
b) if the related SATA port is enabled and
c) in which SATA mode (IDE/AHCI/RAID) the related SATA port is running.

Zitat von viliusgti im Beitrag #249

---

I don't know how to check Sata. I don't where is written about SATA mode.

---

You will find everything, if you look into your mainboard manual.

Zitat von viliusgti im Beitrag #251

---

I look for manual, but found almost nothing, only how looks sata or ide sockets.

---

If you don't find the mainboard manual at home, you can download it from >here<.

Zitat von viliusgti im Beitrag #252

---

Intel Series 8 chipset motherboards have no support for Windows XP.

---

That should be no surpise for you, because your mainboard is brandnew and the OS Windows XP is absolutely outdated.
Nevertheless it is possible to get Windows XP installed onto Intel 8- and 9-Series Chipset systems.

Zitat von viliusgti im Beitrag #254

---

So how to instal windows xp onto Intel 8?

---

The installation of Windows XP onto an Intel 8-Series Chipset system doesn't make any sense for me.
If you want to do it nevertheless, these are the steps:

1. Create a Windows XP SP3 CD with integrated "Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando" according to the start post of this thread.
   Important:
   a) The used XP CD source has to be untouched!
   b) When you get the nLite textmode driver integration popup window, you should only highlight the correct on-board Intel SATA AHCI resp. RAID Controller!
2. Disable CSM within the BIOS and boot off the created XP CD in LEGACY mode (creating a Master Boot Record).
3. When prompted to hit F6, hit F5 instead and choose the suitable ACPI mode.