Zitat von Boleck im Beitrag #180

---

its not working...everything is loaded and working until "Setup is starting Windows", after that it hangs there

---

Zitat von Boleck im Beitrag #182

---

i read somewhere that i need that sata driver, i dont think the driver is incorporated in win xp sp2 or sp3

---

Zitat

---

on the desktop i have same windows (sp sp3) and i looked at the ide drivers that are there and the one for this model (Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4) dont apear there...i`ve found in a driver pack from google the .inf and .cat for my model but dont have that .oem file or something else, only this files

---

What you are talking about is not a driver, but just an Intel information file named "ich78ide.inf", which ia part of the Intel Chipset Device Software and does nothing else than to give the "Standard Dual Channel PCI IDE Controller" of your ICH7M system the name "Intel(R) ICH7-M Family Serial ATA Storage Controller - 27C4". It is not needed at all during the XP installation.
Question:
How do you try to get XP installed (by booting off a CD/DVD or by booting off an USB flash drive)?

@ Boleck:

Where do you want to install Windows XP (onto an empty and freshly formatted HDD/SSD or onto a partition of a HDD/SSD, where your currently used OS is installed)?
If it is the latter, which partition table is your boot sector using (MBR or GPT)?

Zitat von Boleck im Beitrag #186

---

Hmm since i have installed win7 now i cant pass the "Setup is starting windows" part so i can format all my HDD...but i tried with another HDD that i plugged into my PC and formated it and i put it in my laptop and same thing

---

@ kachmann:
Welcome at Win-RAID Forum!

Zitat von kachman im Beitrag #189

---

I created the disc with (chose intel series 8 c220, both drivers). the setup of xp pro sp3 retail starts but I get a BSOD right after it loades all the black text on the blue screen.

---

@ kachmann:

Thanks for the screenshot, which verifies, that the Intel SATA Controller of your notebook is running in AHCI mode and has the DeviceID DEV_9C03.
Consequence:
You should create a new XP CD with integrated Intel textmode driver from scratch (delete the old CD content, which you have previously used as source and re-copy the content of the original XP CD into the processing folder).
Then run nLite, don't let it load any setting from your previous work and integrate the "Universal 32bit Intel RST AHCI & RAID driver v11.2.0.1006 mod by Fernando" as textmode driver.
When you get the textmode driver popup window, just highlight the following Controller: "Intel(R) 8 Series Chipset Family Mobile SATA AHCI Controller DEV_9C03 (added by Fernando)".
The rest is the same as before (let nLite create an ISO file and burn it or let nLite do it as well).
This way you should succeed with the XP installation.

Good luck!

Zitat von kachman im Beitrag #193

---

hey, i still have the same probelm. I nlited the mobile series 8 for 9c. but still that issue.

---