Zitat von tandeejay im Beitrag #133

---

%NVRAID_DESC%=nvraid,SCSI\Array__NVIDIA
This is the only line from the 10.6 version that matches any Hardware ID's in my system.

---

Zitat von tandeejay im Beitrag #135

---

The one that worked for me was the 10.6.0.23 version that you posted around #550 in the other thread. It is the one attached in post #79.

---

Zitat von tandeejay im Beitrag #137

---

The original win-10 one prior to the update that broke nforce raid systems?

---

Zitat von tandeejay im Beitrag #141

---

if you could add that to the nvrd64.inf file and re-sign the pack, it should enable me to use the 11.1.0.43 moded signed driver
The list of nvraid entries in my current unsigned version is:
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk________
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk_20_____
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk_
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20_

---

@tandeejay:
Thanks for your report.
Meanwhile I have removed the packages, which I had attached to my last post, and replaced them by freshly modded and signed ones.

Here is the related part of the nvrd32.inf resp. nvrd64.inf:

%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk________
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk_
%NVRAID_DESC%=nvraid,__NVIDIA_______Raid_Disk_
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk_20_____
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20
%NVRAID_DESC%=nvraid,__NVIDIA____Raid_Disk_20_

Please test it and report.
Good luck!

Zitat von tandeejay im Beitrag #143

---

I have tested the updated package, and it works!

---

1. Download and unzip the "new 32bit resp. 64bit SATARAID driverpack v11.1.0.43 mod+signed by Fernando", which are attached to this post (they are identical with those, which were attached to post #140).
2. Import the Win-RAID CA Certificate by doing a right-click onto the file named Import Win-RAID CA.cmd, which is within the driverpack, run it as Admin and enter "Y" (for "Yes!).
3. Create a System Restore Point.
4. Run the Device Manager, choose the "View" option "Show hidden devices" and manually update - one after the other and without rebooting in between - the driver of the following devices, which are listed within the "Storage Controllers" section:
   a) all devices named "NVIDIA(R) nForce Serial ATA Controller" (maybe there are more than 1 listed),
   b) the device named "NVIDIA(R) nForce RAID Controller" and
   c) all devices named "NVIDIA(R) nForce RAID Device" (there will be more than 1 listed). If there are no devices with such or similar name listed although you had checked the "Show hidden devices", expand the "System Devices" section of the Device Manager, search for devices named "Generic SCSI Array Device" and update the driver of all of these devices - one after the other.
   This is the exact driver update procedure:
   • Right-click onto the device and then choose the options "Update Driver Software..." > "Browse my Computer..." > "Let me pick...". Then hit the "Have Disk" button, navigate to the stored unzipped driverpack and choose the matching INF file (nvraid32.inf for Win10 x86 resp. nvraid64.inf for Win10 x64).
   • Don't reboot when prompted to do it!
   • Repeat the procedure with all devices, which I have listed above.
   • Make sure, that all above mentioned devices now have the same driver version v11.1.0.43 and are listed within the "Storage Controllers" section of the Device Manager.
   • After having completed the driver update of all named devices, you can reboot.
5. Now you hopefully will see and have access to your nForce RAID array.
6. Please post your report about the result into this thread.

@harrytoddler:

Welcome at Win-RAID Forum and thanks for having tested the mod+signed driverpack!
I am glad, that it worked for you.

Regards
Dieter (alias Fernando)

@jwhickman:
Have you already tried to install my new mod+signed 32/64bit NVIDIA nForce SATARAID drivers v11.1.0.43, which are attached to post #146? If not, you should try it.
Just follow my guide (at post #146) and try the Windows Update after having completed the driver update. Although I am not yet sure, I am confident, that you will be able to boot into the nForce RAID array afterwards.