I was using the Revodrive as the system drive, so inside.

Windows 7 install finds the drive using the attached drivers, but Windows 10 does not, so looks like a similar issue.

Any assistance appreciated - again! MS really should correct this.

David

Hi Fernando, thanks for responding so rapidly.

Well, I now have the Revodrive as boot device under Win10 x64.

I did some more investigations and it seems that simply no version of Win10 allows the Silicon Image driver 1.5.23.00 to be installed during the installation process, using the ‘Have Disk’ or any other option. I tried three versions, including the Anniversary and original versions, none of them worked. Hence I concur that this isn’t the Anniversary update issue.

However, I found I could install the SiL driver and hence use the Revodrive when installing Win7. I then upgraded the Win7 installation to Win10 and it is still working fine as the boot device.

MS are frustrating at times!!

@Fernando

First, thanks for the drivers! I recently update to Win 10 1607 and couldn't see my non-system RAID. I followed the instructions in post #146 and was able to get access to my RAID again.

I've now started running into BSOD DPC_Watchdog_Violation what seems to be every 24 hours. I've found a few posts referencing a "24 hour" bug related to the anniversary update. (https://www.tenforums.com/bsod-crashes-d...-10-1607-a.html & https://answers.microsoft.com/en-us/wind...21329a29?page=1) The recommendations seem to be get latest drivers, but that isn't an option. I'm just wondering if you've received any other reports of similar problems. I tried searching through the forum, but I didn't see anything stand out regarding a BSOD with that particular message. I've done some digging with winDbg and it seems to point to nvstor64.sys. I'm using the 11.1.0.43 version of the modified driver. I'm at a loss for what to try next. Any input would be appreciated.

Thanks again for the effort on this!

Zitat von beavel im Beitrag #394

---

I've now started running into BSOD DPC_Watchdog_Violation

---

Zitat von tandeejay im Beitrag #396

---

Zitat von beavel im Beitrag #394

---

I've now started running into BSOD DPC_Watchdog_Violation

---

I've started experiencing exactly the same thing. [...]

---

I've just installed the Windows Insider preview 1703 on a PC that wouldn't install the previous few versions for the reasons in this forum. It has an nForce chipset 430, I think. I can confirm that...

The 1703 version works like a dream on nForce chipsets!!!!!

Admittedly I've only installed it, and not done any testing other than that. I had to boot from the CD and do a fresh install, for some reason it wouldn't run setup from the desktop, I'm not sure why. My other 2 PCs were fine with just an upgrade. Perhaps it's because I'd had to disable updates for a while. Thank you Microsoft, and thank you everyone who has worked so hard to keep Windows working on nForce chipsets over the last few versions of windows. I hope other people can confirm that it also works on other versions of nForce.

OS Version: Windows 10 x64 version 1703
OS Build: 15063.0
Processor: AMD Phenom X3 8450
Motherboard: Gigabyte M61PM-S2
Chipset: nVidia nForce 6100-405/430
RAID: 0 - Striping
Driver: Provider: NVIDIA Corporation
Date: 06/01/2017
Version: 10.6.0.24
File Version: 10.6.0.23 (PART_L3.131021-1012)
(C): 2001-2011 NVIDIA Corporation

What a relief!!!

[Edit: The RAID array was my boot drive.]

I have tried to follow the post about editing the iso file and I end up not being about to uncheck scsidev.inf. I am missing a step i am supose to be doing. I have a raid 0 i am running an Xps 720.

At this point it seems the best solution is to use the Windows creator's update, it's due in 4 days (April 11th) and presumably will have the same drivers as the preview of the same build that works on nForce. It's also easy to sign up for the insider preview that already works. I'm a little concerned that this information will be buried by new posts, especially as there's now so much technical info to read through.

The 1703 preview worked for a clean install. Admittedly this removed a previous installation.

Greetings everyone!

I am trying to install the 11.1.0.43 driver for the "NVIDIA nForce RAID Device". The current device is the stock. 10.6.0.24 from 1/6/2017. The inf file will not install. It says that it does not contain files that apply to my hardware.

I took a look at the windows file that is being used, nvraid.inf and compared it to the file that you provided, Fernando.

I see that there is a device string missing that windows has included. %NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20_ AND %NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk_ (see the trailing underscores!)

----Windows nvraid.inf----
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk________
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk_
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk_20_____
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20_
%NVRAID_BUS_DESC%=nvraidbus,*_NVRAIDBUS
%NVRAID_BUS_DESC%=nvraidbus,*NVRAIDBUS
%NVRAID_BUS_DESC%=nvraidbus,*NVRAID20

----Your 11.1.0.43 nvrd64.inf ----
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk________
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA_______Raid_Disk
%NVRAID_DESC%=nvraid,SCSI\NVIDIA__Raid_Disk_20_____
%NVRAID_DESC%=nvraid,SCSI\__NVIDIA____Raid_Disk_20
%NVRAID_BUS_DESC%=nvraidbus,*_NVRAIDBUS
%NVRAID_BUS_DESC%=nvraidbus,*NVRAIDBUS
%NVRAID_BUS_DESC%=nvraidbus,*NVRAID20

Including these into the inf file works, but then of course I break the signature. Can you include these and resign please? Thanks!

Nebarnix

PS: To be clear, the stock drivers let me see and use my RAID array, but the storage section is not there in the NVidia control panel, so there is no way to manage them! I suppose we need the relevant version of the raid tool maybe?