ok, I'm into the fitc tool, thanks for your help

i go to build and FITC crashes when it gets to me region

Yoga 2 Pro shutdowns every 30 minutes (4)

I read this,
I'm sorry the guide didn't mention how to merge the two files,.

ok thanks,
so do I extract an me from Lenovo bios update and add it in like the guide sudgests?

thankyou, I was getting worried I wouldn't have my laptop back to normal for a short while.
ive attached the files requested,
thankyou very much!

your very kind! thankyou for taking the time to help me! I'm very much in your debt!

flashed it today, works perfectly! thankyou

Hello Everyone,

Currently I have a Lenovo M90z that has the ME/MEBx disabled and no matter how many times I reflash the BIOS it still shows as disabled. These systems do have full VPro capability but for some strange reason it cannot be switched apparantly.

The main issue I am having is that the system has a constant High Fan Speed and the system will not power off once I do a shut down. A shut down restart works fine though. Also if the system goes to sleep after thirty minutes or so it does not wake up and I have press and hold the power button to turn it off.

I have read through the forums and guides and it appears that my Region 2 maybe corrupt and also locked. I am seeking all of your knowledge and assistance when you all have sometime to respond. I am attaching all images/text of what I have done to come to this conclusion.

What I am wondering is, if it is possible at all to somehow enable this mode on these systems once this option has been set to enable the full VPro functionality? As obviously all the motherboards are identical so this data must be stored somewhere preventing the ME/MEBx from starting. Is this a situation where I will have to use the Pinmod solution? I appreciate any help that can be provided.

Thank yo for the response. Yes, I do have a "ME_DISABLE" pins on this mother board. Are you stating I should be able to just jump these pins with a jumper and it should allow for a dump? On this motherboard the chip for "pinmod" is buried under a ventilation fan just below the CPU and it has 64 pins. I'll test jumping the ME_DISABLE and see if it will allow the dump.