I'm trying to mod the bios of my motherboard ASRock P67 Extreme 4 Gen3 to create a hackintosh. I used AFUWINGUI v.3.05.02 to extract the rom file. it seemed to work but then when i went to use amibcp v3.46 it cant open the rom. Am I going about this the wrong way or using the wrong programs? Any help would be greatly appreciated. I attached the files that are directly from ASRocks website to install my current version of my BIOS. I'm not sure whether i should be going about it the way I just did or whether I should try to extract the bios from the updater included, edit it (somehow), and then recompile the updater to flash it.
The easiest and safest way to open the UEFI BIOS of your P67 mainboard and to extract/reinsert specific modules is to use either the AMI Aptio4 MMTool or CodeRush's UEFITool. Don't forget to remove the BIOS header before you are going to flash the modded BIOS (look >here<).
Good luck! Dieter (alias Fernando)
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Print view
Tue Jul 12, 2016 9:12 am
P67 Extreme4 Gen3(2.20)WIN.zip
reply
Win-Raid Forum (Drivers - Firmware - Modding)
»
BIOS Modding
»
BIOS Modding Guides and Problems
»
Asrock BIOS help
