Just an update on this

Marvell 9230 Firmware
2.3.0.1051 = May 17 2013 Marvell (5.0Gbps x2) (Only Have Backup for Hardware Revision A1)
2.3.0.1055 = Oct 8 2013 Marvell (5.0Gbps x2)
2.3.0.1058 = May 2 2014 Marvell (5.0Gbps x2) (Only Have Backup for Hardware Revision A1)
2.3.0.1063 = Oct 15 2014 Marvell (2.5Gbps x2) (Asrock Disabled the hardware raid on on this firmware btw) (for some reason it still runs at 5.0Gbps x2 on Asrock Boards but not on other boards)

I have a thread going about the Marvell 9230
Where i Dumped my 2.3.0.1051 From a Hardware Revision A1 SI-PEX40058
Someone has been kind enough to Dump
2.3.0.1058 From a Hardware Revision A1 SI-PEX40057

http://homeservershow.com/forums/index.p...dates-and-such/

Zitat von FantoMax im Beitrag RE: New Marvell Firmware/Bios

---

Hi Shonk, thanx for the info. My lindy Card is PCIe gen2 but ATM my motherboard has only PCIe gen1 so 2.5Gbps x2 is the best for me. In the future I will test on motherboard with PCIe gen2 and see the result....
If you want, from station drivers site (http://www.station-drivers.com/), you will find also the Firmware 2.3.0.1055 / Bios 1.0.0.20 that I had before. At your risk and post the result. The Script flashes the ImageA1.bin and you have the right Rev.id 11.

---

@Shonk

An interesting thread you got there and I am glad you shared the link to it, as I have collected Marvell firmwares myself. Apart from those linked by you, I also have 2.3.0.1043 A0, 2.3.0.1050 A0 and 2.3.0.1053 A1. But the revision is not important, as the only difference between A0 and A1 is the autoload and only a small patch from autoload separates them. Basically revision A0 needs this patch to be bootable in all cards, while rev A1 already has this patch in hardware.

I can build a firmware for both revisions, be it 2.3.0.1058 or any version. I can also build a test firmware for 2.3.0.1063 to find where the speed cap is happening, but I need someone who has a programmer to recover his card and also to have this as a spare card, in case there is an irreversible damage.

Zitat von lordkag im Beitrag #191

---

I can build a firmware for both revisions, be it 2.3.0.1058 or any version. I can also build a test firmware for 2.3.0.1063 to find where the speed cap is happening, but I need someone who has a programmer to recover his card and also to have this as a spare card, in case there is an irreversible damage.

---

I have a year looking for some information on how to update the Marvell controllers on my motherboard ASRock X79 Extreme9, but somehow always discuss only 91xx and 9230 versions! I also want to update my OROM to latest versions BIOS/Firmware and especially for Marvell SE9220 and maybe SE9172, I use HyperDuo on it for games (SSD R7 Radeon 128Gb + Seagate SV35 2Tb). My motherboard has 2 years and ASRock says "that everything is super and update do not need anything"... I certainly understand that it is marketing, but to buy a new motherboard, I'm not going ... Please help me to update this SATA/RAID OROM controllers to actualy version!

Is it possible to separate the latest Marvell MV-91xx SATA 6G Controller Firmware (E7), Bootloader (E6) and Bios modules from the DOS-upgrade image file "Version 1.0.0.1038" provided by Station Drivers?

I know we gote the Bios module 1.0.0.1038 already but I think the FW is newer v2.3.0.1007 and for Bootloader I'm not sure.

Yes, I tried, but unfortunately "UBU" does not see "DEV_9220".

Zitat von Fernando im Beitrag #771

---

After having opened the image file, which is within the linked package, by using an Hex Editor, I found the Marvell AHCI ROM v1.0.0.1038 for DEV_9123 and the Firmware v2.3.0.1007, but no bootloader.

---

Yes, I know it, but look at this screenshot:

And this: