I have a HP 22-3116 All-in-One Desktop. It originally came with windows 10, but I had to downgrade to windows 7 for software compatibility. I managed to get all the driver except for the sata controller.

The computer uses an Intel N-series chipset with N3050 celeron cpu.

Intel Cherry Trail / Braswell SoC - SATA AHCI Controller
PCI\VEN_8086&DEV_22A3&SUBSYS_2B41103C&REV_21

What is the best drive to use for this? Whatever I try it seems to default back to the MS standard AHCI sata drivers. Thanks

Sure, I would like to test it. I will need the 64bit version. Thank you.

Hello, can you send again. I keep getting an error when decompressing the file. Thank you.

Redownloaded again, worked ok. Maybe there was a bird on the wire. My apologies.

Hello, unfortunately no good news. I installed the drivers, windows prompts says I must restart. After restart windows hangs at boot up at the "Starting Windows" splash screen. I have two of these computers, tried on both with same experience. I left one on overnight hoping that it would boot past this eventually but no luck. I had to boot with last known good config which switched back to the MS drivers.

Previously I installed the Baytrail sata ahci DEV_0F23 (found here) because from the documentation I have read said Baytrail and Cherry were very similar, with Cherry being an upgrade. They let me boot up but when I would click update driver in device manager....it would revert back to MS drives.

Hi Fernando,
I have Lenovo b51-30 with CPU Intel Celeron N3060 and Intel Braswell chipset. I installed Windows 7 64-bit and in device manager - ide ata/atapi controllers have standard ahci 1.0 serial ata controller - Microsoft generic driver (PCI\VEN_8086&DEV_22A3&SUBSYS_390117AA&REV_35). I searched the intel site, your forum and many others sites and didn't find anything useful. I tried with f6flpy-x64_v15.2.0.1020_modded.zip and Universal 64bit Intel RSTe AHCI+RAID drivers v13.2.4.1000 mod+signed by Fernando.rar, but didn't have success.
Which drivers do I use?
Can you help me?
Tnx.

Thank you Fernando!
Although in iaAHCI.inf not exist PCI\VEN_8086&DEV_22A3... this driver work stable. LOL!
Tnx again.

I need driver for 32 bits