Intel Cherry Trail / Braswell SoC - SATA AHCI Controller

PCI\VEN_8086&DEV_22A3&SUBSYS_9AF11019&REV_21

Windows 7 - 32 bits

Hi Fernando,
I have Lenovo b41-30 with CPU Intel Celeron N3060 and Intel Braswell chipset. I want installed Windows xp 32bit system.(PCI\VEN_8086&DEV_22A3&SUBSYS_390117AA&REV_35).which drivers do I use? I tried with Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando (latest variant) , but didn't have success.

The OS Setup prompted to hit F6, after this step. the computer just power off without any error message . I am from China, English is not good

The AHCI driver is into the XP image, I am not hit F6! I have not touched the computer until the computer is powered off

Zitat von Fernando im Beitrag #23

---

@wacby001:
If the computer is powering off during the XP installation without any error message, there is something wrong either with your computer or with the XP image you are booting off.
To find it out I recommend to boot off the original (not customized) XP CD and watch what happens.

---

Hi Fernando,
I have an Acer Extensa 2519-C5KU with an Intel Celeron N3160 CPU and Braswell chipset. I want to install Windows XP on it, but I didn't find any drivers for this device (PCI\VEN_8086&DEV_22A3&SUBSYS_10121025&REV_35). So could you help me, please?

Hello,

I maintain a cheap HP PC with Win10 64bit installed, and all drivers are vendor specific without the IDE Controller, which uses a standard Microsoft driver. The Hardware ID is:

PCI\VEN_8086&DEV_22A3&SUBSYS_821D103C&REV_35

Listed by devicehunt.com as "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller"

Is there a benefit in using a" modded-by-Fernando-driver" instead of the Microsoft driver, such as more speed in data transmission? If yes, which driver do you recommend?

HP 15-AC129NM (Intel Pentium N3700 1.6 GHz and again Braswell on SATA). Now is Windows 10 64bit. And again favorite 64bit Intel RST AHCI & RAID driver v11.2.0.1006 WHQL do a job!