EVGA SR-2 which has both a JMicron and a Marvell controller as well as ICH10R.

Unfortunately, didn't work for me. Board booted into BIOS fine first time around as the chipset was toggled in Compatability mode. Once I flipped it to RAID mode it would hang on a blinking cursor once it got to the OROM.

I didn't mess around with it further; some people in the Win-Raid thread were talking about messing with the JMicron controller and certain settings letting it boot and others not.

Maybe if someone refines this mod I'll give it another shot.

TerryMathews, Did you try disabling the JMicron and Marvell controller then try to enable RAID mode on the ICH10R controller?

For me, its the Marvell controller that doesn't work when I enable RAID mode on the ICH10R controller and
all I get is the same thing as you, the hang on a blinking cursor when the system is trying to load up the
RAID screen that normally shows just before the system boots. The system including RAID mode on the
ICH10R controller works perfectly fine again as soon as I disable the Marvell controller.

Member SkOrPn with the same motherboard and modded BIOS as me doesn't suffer from this issue.

This modded OROM is definitely causing some issues on some computer systems because I have
never had this issue when I am using the non modified Intel OROMs.

I wish I had your guy's problem instead. I want my Marvel controller disabled as I NEVER use it. Anything other than setting it to AHCI causes the Intel OROM to hang on a black screen with a blinking cursor. Board only boots to Windows with the Marvel ENABLED. WEIRD lol

By the way, the Marvell 91xx AHCI/RAID ROM version 1.0.0.1038 for DEV_9123 that is shared here
in the thread below works with our Rampage III Extreme Onboard Marvell Controller.

AHCI & RAID ROM Modules

I have modded the Rampage III Extreme 1601 BIOS to include this updated OROM
and the Onboard Marvell Controller seems to be working perfectly fine with it.

My R3E board has a 9128, not a 9123, if it matters. Is this still newer than the module I am using now in your last modded bios?

Yes, I just discovered the new module here after my last modded bios.

I didn't even know there was a new Marvell controller OROM module
out that would work for our Marvell controller.

If you would like my updated modded BIOS which also includes
this new Marvell controller OROM module, please let me
know and I will post a link for it here.

Zitat von sinders im Beitrag #36

---

If you would like my updated modded BIOS which also includes
this new Marvell controller OROM module, please let me
know and I will post a link for it here.

---

Unfortunately it doesn't fix the issue we are having with this modded Intel OROM but I added
it anyways because its newer than the Marvell controller OROM module we where using which
was Marvell 91xx AHCI/RAID ROM version 1.0.0.1033.

Zitat von sinders im Beitrag #38

---

Unfortunately it doesn't fix the issue we are having with this modded Intel OROM but I added
it anyways because its newer than the Marvell controller OROM module we where using which
was Marvell 91xx AHCI/RAID ROM version 1.0.0.1033.

---

Zitat von sinders im Beitrag #32

---

TerryMathews, Did you try disabling the JMicron and Marvell controller then try to enable RAID mode on the ICH10R controller?

For me, its the Marvell controller that doesn't work when I enable RAID mode on the ICH10R controller and
all I get is the same thing as you, the hang on a blinking cursor when the system is trying to load up the
RAID screen that normally shows just before the system boots. The system including RAID mode on the
ICH10R controller works perfectly fine again as soon as I disable the Marvell controller.

Member SkOrPn with the same motherboard and modded BIOS as me doesn't suffer from this issue.

This modded OROM is definitely causing some issues on some computer systems because I have
never had this issue when I am using the non modified Intel OROMs.

---

Thanks a lot Fernando for letting us know that CPL0 now knows about the Marvell Controller problem.

It is strange how me and SkOrPn have the same board thought our Marvell Controller has a different ID.

I have an ID of 9123 displaying where the firmware and bios version is displayed
when going into the Marvell Controller bios setup utility.

Perhaps there is certain code that relates to the Rampage III Extreme that needs inserted into the modded OROM.

CPL0 maybe inserted code that was for the board he made the modded OROM on and so using the modded
OROM on a different board might be the cause of the issue / the effects we are experiencing.

I guess CPL0 is the only one who can answer this question.