Safe to proceed? https://imgur.com/a/ZP1AAj6

No, do not proceed! Sorry, that was a cap file renamed rom and I didn't notice so I didn't think to tell you to remove rom from capsule again!
Here, it's fixed - https://nofile.io/f/FejEKUbG8qM/Mod32.zip

Its working now!
Did everything you said and now i'm presented with these options in the bios https://imgur.com/a/iXl9W1C
Again thank you so much for your help and the time you took to help a stranger on the internet, don't know how I can repay you

I'm glad it's all OK and you waited! You're welcome, thank you too!

I see iGPU voltage options there, but no voltage entry area shown, does it appear if you change the mode or not? If not, I'll have to set that one to visible for you too.
Also, those two AI Tuners at top, they present to you in a different and understandable way correct? I assumed so when I was looking them over, but wasn't quite sure, if you want either disabled let me know.

How's the exit button?

The exit button is working as intended
Regarding iGPU voltage, I can change it from offset to manual but (i think) it makes no difference since my cpu has no iGPU.
Yeah the 2 AI tuners have different options to them, haven't tested them though https://imgur.com/a/o7csDfw

Great it's working, does it still look different? Probably nothing we can do to fix, but I wondered since you showed that one image where it was graphically off.
Well then iGPU doesn't matter if you have no iGPU That may or may not be why there is not a value underneath, but since I don't see in base BIOS I assume it probably would not show even if you had iGPU in CPU anyway. If you want I can remove those entries?
Thanks, about the tuners, I thought so based on what was said in BIOS strings. I think top one is memory auto/XMP and bottom is CPU auto/manual. There is explanation string for each in BIOS if you want me to show you what it says?

Yeah the exit button still has the graphical error, looks like it's only a visual bug. Going to keep the gpu settings baked in incase I get a cpu with an iGPU.
I'll likely leave most settings as is, since I was only after the RAM frequency setting, and voltage/multicore enchanment for that 400mhz overclock on the CPU

Again thank you for all the help and time, couldn't have done it without you

Sounds like a good plan! You're welcome, and good luck on the overclocking stability!

hello every one

i need to edit my bios how can i do it
my laptop asus fx504ge bios 312 not support Compatibility Support Module (CSM)
can i change it to bios ver 302
i need install windows 7 in my laptop asus fx504ge gaming

hi,

somone can help me mod my bios , i have an asus gx501gi and i need to add CSM support on my bios. i need legacy boot.
thx

here is my afuwin.rom : https://www.sendspace.com/file/brzf2x

Hello! Anyone has some spare Time to Unlock the Advanced Tab in this BIOS for me?
Ive unlocked every other Option avaible in the BIOS but couldnt unlock the Advanced Tab. :D


https://dlcdnets.asus.com/pub/ASUS/EeeBo...3SAAS301zip.zip

@bosu - What exactly do you need this regarding, graphics or hard drives, or both? I can set BIOS to use RST Legacy OROM (Default disabled), but cannot find setting for legacy graphics

@andrew93752 - post a copy of your already modified BIOS, that way we can do the final mod for you and you don't have to redo all that you've already modified.
Please also include an image of your stock BIOS so all stock tabs/sections are visible, and an image of stock boot and stock advanced page as well (If no advanced at all with stock, OK, skip this one).

@Lost_N_BIOS i need for hard drive i need mbr boot my bios only support uefi. thanks