Windows 10, no overclock. I have installed only Intel Chipset V10.1.1.7 for Win10 32bit&64bit only. IME and lan drivers cant be installed because those device are missing in device manager. This mobo is powet off every 30min even if i stay in bios.

OK. I'm sorry!

Hi great manual

I have a question, i want to delete the microcode for 306F2 processors. (Xeon E5-2600 v3 series)
In my MSI bios there are two but how can i delete those, so i don't want a microcode written in the bios.
so i must see in bios 306F2 0
It is not possible with UBU because of the Aptio V but how to do it the other way, i understand how to get a other version of the microcode but how to have no microcode loaded?

@Fernando
Thanks for your answer, i already red a lot of 'manuals' but i still can not get it right but i will some day ;-) i hope with some help....

@ajschot,

Use a hex editor to load up your bios file, search for the microcode section and manually delete it out. First find out what version is already installed, find a copy of that version in like ubutool and copy enough hex strings so you have enough of a pattern to search like the beginning and end of the file for starters. Then delete it out. Then pray it works. I did the opposite this way inserting new microcode. Not sure if it works other way around. Anyhow doesn't your system need microcode to start the CPU I thought?

Zitat von davidm71 im Beitrag #188

---

@ajschot,

Use a hex editor to load up your bios file, search for the microcode section and manually delete it out. First find out what version is already installed, find a copy of that version in like ubutool and copy enough hex strings so you have enough of a pattern to search like the beginning and end of the file for starters. Then delete it out. Then pray it works. I did the opposite this way inserting new microcode. Not sure if it works other way around. Anyhow doesn't your system need microcode to start the CPU I thought?

---

SAY WHAT : I'm all ears how do I do this I also have this e5-2699 v3 what mods did you make to the microcode. What board are you running btw ?

Zitat von futiless im Beitrag #190

---

SAY WHAT : I'm all ears how do I do this I also have this e5-2699 v3 what mods did you make to the microcode.

---

Hello guys, firstly I wanted to say hello because this is my first post.

I have a question for you, can i update procesor microcode in my Gigabyte ga-970a-ds3p rev.2 for newer version. Actualiy i have 1.5.0.5 MC extractor show me that is Outdated.

If this is the wrong place for this question then please move.
Thanx for any help.

@perihelion
You have to manually replace it with hex editor. Done this before on another GA-970A-DS3P rev2.
I can offer the modded BIOS if you want.

Hello, sure if you can.
Here is my working bios updatet witch UBU + microcode files.
https://files.fm/u/x48j7zw5#_

Thanx for help.