System specs so we can get that out of the way

FX-8300
Gigabyte GA 970A-DS3P v2.0
2x8gig sticks Corsair vengeance 1866Mhz
2x250gig Samsung Evo 850 SSDs
Seasonic 1050w PSU
EVGA GTX 970 SSC
Samsung DVD-RW SATA

Just trying to install Win7 Pro 64 bit in Raid-0.
Driver won't load.
USB drive has LED light that flashes when accessed. Never flashes when trying to install driver during windows install.
Raid array cannot be seen thru windows, can be seen in BIOS.
I went to the recommended driver page for AMD driver. Tried every single one thru flash drive.
I have seen on the internet this isn't a new thing & I wish I had done more research into this hardware.
If anyone has the holy grail of drivers to get this installed I appreciate a link to it. Thanks

EDIT by Fernando at 04/29/2016: Since the problem meanwhile has been solved, I have customized the thread title.

ok to answer some of these right away.

1. Yes, I can create the array through the onboard controllers BIOS by hitting Ctrl+F. I didn't change any of the perimeters(64k chunk size/Raid-0/etc...)
2. Yes, SATA controller is set to raid mode, once the array is created it can be seen & selected as a boot device in BIOS
3. Now as far as the DeviceID in device manager, I currently have the SATA controller set to AHCI since I cannot get raid setup. I installed the OS on 1 Evo 850 & the other is sitting here.
I see the IDE ATA/ATAPI controller & opening it says AMD SATA controller. Now where you find the exact name I cannot tell. Maybe since the SATA controller isn't set to raid it is not showing the name.

Since it's a UEFI BIOS I set everything to legacy on that page in the BIOS. Since Win7 is a legacy OS nothing worked with any of the UEFI options enabled.
I feel the main issue is the driver is NOT signed by Microsoft & it's not allowing the unsigned driver to install the OS. I get no failure warning however. Nothing as a matter of fact. It just goes back to drive selection screen & still shows a blank screen.

I've tried installing it off the motherboard disc, 10-15 diff USB drives. Nothing seems to work.
Searching the internet before I bought this setup would have shown me all the issues people were having with these south bridges.
So I blame me.

But I thank you for any & all help you can give me. Just let me know where in device mngr I can find that info.

PCI\VEN_1002&DEV_4391&SUBSYS_B0021458&REV_40
PCI\VEN_1002&DEV_4391&SUBSYS_B0021458
PCI\VEN_1002&DEV_4391&CC_010601
PCI\VEN_1002&DEV_4391&CC_0106

Ok, from top to bottom that is what I see.
Yea since I'm unable to get windows installed thru the raid controller, I'm unable to get into the device mngr & see it's name.

That winrar file you attached keeps giving errors when I open it. The certificate file won't allow me to extract it. Thanks for all your help though.
So you want me to try using the Vista 64bit raid driver 3.3.1540.40 to install? I can give it a try.
I'd like to get a copy of that file you uploaded to properly extract though first.
I'm wondering if I am using a very old version of winrar. Yea reading the error, it says file is corrupt.
Let me know if you can upload a new one.

Ok sorry for this, I installed latest version Winrar 5.31
Still showing me error
was trying to upload a pic to show you the error, but unable to figure out how here.

Ok, moron time now. I rebooted & it works now lol.
So I guess I will give a try right now. WTH why not ...

Quick question. Do I need to take the cert file out of the folder & place it in the USB drive? Or leave inside folder & put it in a folder with other 3 files? Sorry for all of this. Just trying to get it right.

About the cert line needing 3-4 lines if there is more than 1 device?