so you think that with a cross-flash i could fix uefi?
is it possible to just extract the fixed module and replace it in my bios?
I don't think it could fix your problem. I just looked at the product specification and the BIOS changelog and thought it could be possible. Either way, don't do it. The risk of a brick is just too high. If you are going to do it anyway, have a soldering iron, a programmer and a hex editor at your hand. If you don't know what to do with these things, don't attempt a cross flash!
I don't know what was fixed and changed. I don't know what the specific differences are (chipset revision, GPIO usage, main BIOS code, etc.). Simply extract this and insert there is not going to happen.
Zitat von Fernando im Beitrag #211. How many and which HDDs/SSDs are connected to your mainboard? 2. To which mode (IDE/AHCI/RAID) has your Intel SATA Controller been set within the BIOS?
1 hdd 1tb sata 3 (replaced the old hdd) AHCI mode to boot os x
Why did you try to update/insert the Intel RST RAID related BIOS modules (Intel RST RAID ROM and EFI "RaidDriver")? That doesn't make any sense, because they are not used by your system as long you are running your HDD in AHCI mode.
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Zitat von kyl im Beitrag #34i was not sure if it was needed by efi so i added it
Any Intel RAID ROM or EFI SataDriver/RaidDriver module within the BIOS of your system is useless, because it cannot and will not be used, because you have an AHCI and no RAID system.
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
Hi everyone. First of all, I'm aware that this is an old thread but anyway, I'll take my chances. I have the exact same laptop as @kyl . I would like to somehow make it run win10 in UEFI mode but have faced the same issues as described here = stuck on windows loading flag. Is there maybe some way to fix this ?
hi, UEFI is not fully implemented in our bios, it is not able to boot any OS, you must use a bootloader to emulate it and boot your OS in UEFI mode.
I m using clover EFI (https://github.com/CloverHackyColor/CloverBootloader) but it is not that good if you only care about Windows, you may try rEFInd first. You can also set nvram emulation for a full UEFI experience (i'm not using it so i can't tell you more about this)
Print view
Tue Mar 15, 2016 2:24 pm
reply
Win-Raid Forum (Drivers - Firmware - Modding)
»
BIOS Modding
»
BIOS Modding Guides and Problems
»
Bios Modding questions
