Ok I will follow those directions.
So i'm stuck and frustrated.

Im following instructions from page 1 - D3. ME 7 - 10 & TXE 1 - 2

Attached is the original dump from the ch341 bios programmer.

Also attached is the bios(capsule) i was running before screwing up my ME using fptw64.

I'm getting confused on how how to compile this bios for Intel ME 8.

I've read the directions and tried a few times to replace my ME with latest ME Region.bin in the decomp folder.

If anyone can help me compile a working bios for my p9x79 pro it would be a great blessing.

I'm going to try again at this tonight.

Attached is my spi, newest ME downloaded, and extracted ME from original SPI, along with the capsulated bios i was running before this nightmare happened.


More info on how this happened can be found here:[OFFER] P9X79 PRO BIOS Modded for NVMe SSD (16)

and here :Intel Management Engine: Drivers, Firmware & System Tools (320)

Again any guidance or someone can compile something i can flash with my programer that would be greatly appreciated i've been down for like 2 months

@fernando

@Lost_N_Bios

@plutomaniac

@plutomaniac
@Lost_N_BIOS
My mobo is GIGABYTE H61M-DS2 REV2.0.It's ME version is 8.1.30.1350,and I updated the latest ME version (8.1.70.1590)by fitc.But it prompted the error about insuficient space.
The original ME is 1396KB,and the latest ME is 1524KB.
Could you tell me how should I do ?


By the way,I had also tried in GIGABYTE B75M-D3V rev2.0,and it prompted the same words even I just replaced with the same ME version.

Hi. Can someone help me to clean V12 cse me region? Desktop pc acer XC-885, 64Mbit flash contains only bios region and 32Mbit flash contains ME region.
Here is dumped ME. I tried, but got this errors when opening.
Error 9: Failed to decompose Image.
Error 42: Failed to open with processed commands.
Unable to open file: xxx Reverting to default configuration.
http://s000.tinyupload.com/index.php?fil...988148978545038

Dump your bios- region, too. Put bios- region and ME-/desc- region together to a complete 'bios'. Clean that file.

How to put?

@Mickeytang
The ME firmware is missing in the file you dump by the SPI.
Hi,I've made it for you with the latest ME firmware and NVME supported,you could flash it by Programmer or other method.
http://s000.tinyupload.com/?file_id=82746734107642563383

Zitat von Hai kkk im Beitrag #261

---

How to put?

---

Zitat von lfb6 im Beitrag #263

---

Zitat von Hai kkk im Beitrag #261

---

How to put?

---

Hexeditor. Append bios region to the end of your other/ first dump. Check results with UEFItoolNE.

---

@Hai kkk Without explaining what you did and posting the corresponding files it's impossible to comment.

Zitat von lfb6 im Beitrag #265

---

@Hai kkk Without explaining what you did and posting the corresponding files it's impossible to comment.

---

https://drive.google.com/file/d/1JnXeCQW...iew?usp=sharing

when i am generating the DUMMY.PEM its showing the error please help me.

@gloobox
Thank you so much I'm going to test it tonight.

You're a blessing truly I'll let you know how it goes


Update- It works. @gloobox your a god. I wish you great health and success.


Only thing off is the MAC Address but i can fix that.

Thank you!

@Mickeytang
I modded the file download in official website,so mac is missing.
Happy to see your succeed!

@plutomaniac
Hello,I first throw the file into the FITc and it will prompt the error"configuration parameter size mismatch".

MOBO:Asrock B75M-ITX
BIOS version:2.00(official version)




And I found the ME is 5MB size different from another B75/H77 chipests of ASROCK(1.5MB).But I think it's not the point of the problem.
Could you tell me how to solve it?Thanks!