@tuanbacky - same version ME, or update and clean?

Zitat von Lost_N_BIOS im Beitrag #151

---

@tuanbacky - same version ME, or update and clean?

---

@tuanbacky - Please answer my question and I can help? From your image I see you are using wrong version of FITc (v4), you need to use V3 package tools. And pay attention at step #7 in the cleaning guide, this applies to your BIOS
Do you want same version ME only and clean, or update and clean? Also, please link stock BIOS download, thanks!

What is this BIOS you attached at post #150? Have you modified it at all? How did you get the dump, what tool was used?

Did you unlock your FD yet? That is only way you can update/fix ME on this system. Did you already test dump via FPTw, if yes, try again using V3 package instead of V4 and see if you can get complete dump via >> FPTw.exe -d bios.bin
Also dump FD and upload here if you are not sure >> FPTw.exe -desc -d FD.bin

Check to see if you have jumper for ME inside there, otherwise you will have to either pinmod, or purchase a flash programmer (CH341A) and a SOIC8 test clip cable.
See section E - [Guide] Unlock Intel Flash Descriptor Read/Write Access Permissions for SPI Servicing

Zitat von Lost_N_BIOS im Beitrag #153

---

@tuanbacky - Please answer my question and I can help? From your image I see you are using wrong version of FITc (v4), you need to use V3 package tools. And pay attention at step #7 in the cleaning guide, this applies to your BIOS
Do you want same version ME only and clean, or update and clean? Also, please link stock BIOS download, thanks!

What is this BIOS you attached at post #150? Have you modified it at all? How did you get the dump, what tool was used?

Did you unlock your FD yet? That is only way you can update/fix ME on this system. Did you already test dump via FPTw, if yes, try again using V3 package instead of V4 and see if you can get complete dump via >> FPTw.exe -d bios.bin
Also dump FD and upload here if you are not sure >> FPTw.exe -desc -d FD.bin

Check to see if you have jumper for ME inside there, otherwise you will have to either pinmod, or purchase a flash programmer (CH341A) and a SOIC8 test clip cable.
See section E - [Guide] Unlock Intel Flash Descriptor Read/Write Access Permissions for SPI Servicing

---

IS al those red error when you open file, or after you try to build? Did you put in the dummy key file (Step #7)

If you dumped from good working machine, you can put your system specific details into that BIOS (Serial, LAN MAC ID, UUID) and then program to your board, ME does not need cleaned if you said dump from working system

You keep uploading BIOS files, without description, I am not going to keep downloading files, you only need one file not a new one in each post. If you need system details copied over, zip together a dump from your system, and the other working system into same zip, name them so I know which is which.
Also, include the dummy key file you are creating and using for Step #7

Just for knowledge, can I use Ignition CCK in place of my old Ignition IBK??
In Short, can I upgrade from 6.0.20.1185_IGN_IBX_PRD_RGN.bin to 6.0.50.1252_IGN_CCK_PRD_RGN.bin??

@plutomaniac


I think you have a typo in the second section step 5 to 6 there is no mention what file to open in FIT.

I have the same problem with an equal board but Gateway NE56R notebook: err no = 22. (post #30 - razor_amd user)
How do i merge main.bim with ec.bin?
Thanks!!!

Zitat von plutomaniac im Beitrag #160

---

@ toniu-massa:

Upload/Link/Attach the dump your are trying to clean.

---

copy /b Gateway_NE56R_U36.bin+Gateway_NE56R_U42.bin spi.bin
 

Didn't work in windows 10 powershell, but in cmd work

thanks

i am trying to clean bios for a lenovo T460 because someone probably put a random dump from the internet and now the laptop takjes a while to display image at startup

I tried to folow the instructions in the guide but i am confused at step 7(guide for CSME version 11)
When i load my image i do not have platform integrity but however i have oem public hash(see printscreen) Does this mean that i have to folow the steps for step 7 or skip them?
also in the repository i am unsure what region to chose NPDM or YPDM
bios image