Zitat von Fernando im Beitrag #562

---

Zitat von tandeejay im Beitrag #560

---

Are you able to make the realtek audio drivers available on your onedrive "mirror"?

---

Done!

---

What's happened to this thread? it seems to have lost 1 weeks worth of activity ?!?

Zitat von tandeejay im Beitrag #482

---

What's happened to this thread? it seems to have lost 1 weeks worth of activity ?!?

---

Hello

I have this motherboard Asrock ALiveNF5SLI-1394 with chipset NVIDIA® nForce 560 SLI Chipset.


Is better to work ssd in sata ide mode or in raid mode?
Better i mean faster and stable.

And which driver i must to install?

Thanks in advanced.

Thank you, Fernando, for your hard work and efforts. I have an nforce4 MCP61 chipset that was causing a daily (every 87320 seconds of uptime) DPC watchdog violation blue screen. nvstor.sys used by the SATA driver 10.6.0.23 from nvidia was causing the problem. Your "LEGACY mode SATA/PATA and RAID Driver (v6.99) signed by you" in the "Special 64bit nForce3-4 LEGACY Driverpack for Win7-10 x64 v10.3" made my desktop gaming computer stable again. Thank you again.
Here's the thread where the problem was solved: https://forums.mydigitallife.info/thread...l=1#post1273430

Hey Fernando,
I've an nForce 750i Motherboard (MSI P7N SLI), and have fitted a new SATA III SSD.

Would one of your optimized drivers allow 3Gbit/s SATA II speed, rather than how it is currently stuck at 1.5Gbit/s please (Sandisk SSD utility reports this)?
This is with a fresh Windows 10 64Bit install. I'm not sure if my BIOS has AHCI mode option but from what I've read the old nForce driver restricts to SATA I speed as it doesn't recognise the newer drives.

Thanks,
Biggy

Hi Fernando,
I replaced the nForce drivers in Device Manager with 'Standard Dual Channel PCI IDE Controller'. Seems ok but still stuck at 1.5Gbit/s link speed.

The SSD has really sped the PC up though and I probably wont notice much difference I guess if I bought a SATA III card like the StarTech one

Thanks,
Andy

Hello,
Just to inform that my EeePC 1201N (MCP-7A chipset) performs better (using an SSD and AHCI driver from your package v10.4) when using SMU driver from nVidia MCP79 Chipset, v.15.57 pack (downloaded at dell site).
SMU driver from dell is v5.1.2600.0208, the one from your v10.4 pack is 5.1.2600.0171
From what I understand it seems that small files read/write performs significantly better.
Regards.

Hi,

Are the modded driver compatible with Windows 8.1?

driver packs >Latest 32bit nForce Driverpack for Win7-10 x86 v10.4< works well with latest windows_10_version_1607_updated_jul_2016_x86 iso .
it also has two others drivers that are not installed : the smu that has no driver with w10 [ named coprocessor with a ? ] and the driver for pci bus in smbus [ that w10 "drives" ]...

I've been reading this thread with great interest, hoping someone has already posted about my scenario. Not yet.

I want to upgrade my graphics to GeForce GTX 950. I tried everything and all I get on reboot is a black screen after a 3-second beep, nothing on the display at all. There is some drive activity for a short while and then nothing. I chatted with EVGA and they said my mobo does support the GTX 950 but that, as we all know, the mobo drivers have not been updated in years and definitely not for Windows 10. Enter Fernando.

Could these Fernando drivers be the missing link that will get the GTX 950 up and running? If so, I'll need some help with which drivers I need to install. I don't use RAID. I boot off an SSD drive. Thanks !

I have read in several forums that perhaps what may work is activating legacy mode in BIOS, or making the PCI-e the primary display (I believe it already is), remove the card and halt the CPU while booting and then insert the card and continue, disable Intel's HD drivers (I don't believe I'm using them), and disabling secure boot (I don't think I use that either).

UPDATE: I tried updating manually the network drivers using the INF file in Fernando's ETHERNET folder but got an error: "a problem was encountered while attempting to add the driver to the store". I also tried using setup.exe which completed successfully, but the driver details still show the MS drivers as being installed (maybe I have to reboot?).