With windows 10 and Intel sata controller is there a way to fix an OS raid0 that initially booted into AHCI? PLEASE help very little of the data was backed up. I know this is raid/bios 101. optional rant explanation.

Warning- RANT---------Was ignorant enough to use a 3ed party Driver updater. [Software called Driver talent, garbage.] Without a warning visible or prompt my Bios was updated while "repairing" drivers for a simple usb device! Being unaware of the new Bios, the system tried to initially booted into AHCI destroying my OS drives RAID0. This is Raid/bios 101 am aware. 2.2 bios was great. 2.3 is pointless bloated, only adding "Change Internet Flash server." Does anyone actually flash bios from the internet? I'm furious Asrock even included this feature. -------

BUILD- Asrock z77 foc, i7-2700k, sli 980 ti all watercooled, etc. Ran fine for years with stable overclock of 4.5ghz.

OMG help! Wonderful, thank you!
Greetings and wonderful forum. Kuddo's!
first, the software "driver talent" caused this. simply tried to "repair" driver for a usb device.
Driver Talent did in fact update the bios silently. UEFI always showed 2.2, no need for 2.3 update - bloated with "change Internet Flash server."
I build my own pc's and overclock, hobby.
Yes this is a RAID0 Intel, the CTRL-I still shows both my OS raid0 and storage RAID5 intact and bootable. Still Named correctly.
Although in UEFI, boot it says 840 pro as one boot device and RAID5 (named) as a second.

EDIT 1:
not software created, marvell/windows no. Intel chipset yes.

EDIT 2:
I also have extra Asrock bios chips already tried that :(

EDIT 3:
The featured CTRL-I with intel chip sees both my OS RAID0 and RAID5 (storage), correctly named and bootable. ALL GREEN.
Although in UEFI Bootable devices menu the OS RAID0 was replaced. Instead it incorrectly show's only one single 840pro not (840pro raid0) and the correctly named RAID5 (storage).

EDIT by Fernando: To save space and for a better reading I have merged the latest posts and removed unneeded empty lines.

Read this.

"This guide only works if the RAID that has failed is NOT your primary boot volume. Some steps in Windows will be required. If it is your boot volume, some alternative steps for the Windows portion will need to be found."
Thank you, but that isn't the problem. Or perhaps i'm not understanding. There must be an easier way. None of my disks or RAID have failed. I will continue searching. That might fix it, although it's from

My boot disk hasn't failed. Just won't show up in UEFI I know from experience if i try this on my boot volume (raid0) a re-image will be required

[img][/img]|addpics|3w5-1-e41a.jpg|/addpics|

|addpics|3w5-2-d7a0.jpg|/addpics|

no, one OS only...RAID0 - named "840pro" see image

No, the Raid0 is my OS only, drivers, Chrome, and Fallout 4 :)

The Raid5 video storage ONLY .mkv...

[Marvell sata controller has Storage has a Raid0 also, with Steam and other larger Games software.]

thank you all so much!!!!!!!!!

China company Driver Talent.

Driver Talent, did a silent bios update.

RAID0 day 1 stuff- win10 still no fix?

Zitat

---

By the way: If you or anyone else switches the SATA mode from RAID to AHCI, you will not be able to boot into one of the RAID0 array members.

---

i would NEVER let RAID0 boot into AHCI, {i learned by that years ago :( with my 1st pc raid0 build. but that was win7} Lesson learned, the reason i know it was a silent bios update. I had 2.2bios! Driver Talent Software made it 2.3 {silent} bios update. 2.3bios only adds "online bios update" feature. i only instant flash.
that is my question.... is no way to fix a raid0 array after One boot into AHCI?
Still no fix with win10? :(
except delete array and rebuild and reimage?

Zitat

---

It was you who gave the RAID0 airraiy the name "Intel 840 Pro".

---

No- see 1st image. - i named it "840 Pro". -Intel {ctrl-i} still have names correct "840pro"
See 2ed image. -New bios 2.3, booted into ahci , now UEFI named it "Intel 840 Pro"
----------------

Zitat

---

What let you think, that your RAID0 array booted up as AHCI

---

Driver Talent did a silent bios update!!! :(
so
Default uefi booted as AHCI.......... then ... i see ...... "missing OS".
I instantly returned UEFI storage config to raid (duh) not AHCI.
so
I know it booted only once AHCI screen was showing "missing os", UEFI storage config was in not set to RAID.
:(

THANK YOU !!!!!! :)

Thank you again!!
before typing i knew.... but do want to confirm.... hope i am wrong

so reset raid array and reimage? :( :( :(