A friend show me that he can boot with his SSD Samsung 950 PRO NVME on 775 motherboard (asus P5E with original bios), it is detected as a regular drive "IDE: PCIE DRIVE 0"

But I need an legacy oprom...

Is it possible to get efi version of this module. Because I want to use it with clover so that my ahci ssd apple ssd 1024sm can be found by clover. I booted from clover and started windows installation and windows was able to find the ssd and installed. But on next boot I have to start from the ahci ssd. But clover is not detecting ahci ssd. I am using ASUS p6t se motherboard. Any help would be appreciated.
Thank you

@Fernando:
Thank You for the reply.

Sorry i am new to this bios things. I booted from clover and from efi shell i loaded the SAMSUNG_M2_DXE.ffs and it is display error message saying it is not an image.

So i followed this guide [Guide] How to extract/insert/replace EFI BIOS modules by using the UEFITool and converted the ffs to efi module.

and tried to load in the clover efi shell and it was displaying error loading startimage file not found.

I have asus p6t se MB and apple proprietary ssd 1tb from macbook pro mid 2014 ie connected via pcie adopter. I am not able to make the ssd bootable. But when i try to run the windows setup it detects the ssd. but on next boot clover is not detecting the ssd.

Is there any way to fix this.

Thanks

Is there any way i can make this work with asus p6t se which is not an uefi bios and it is legacy
Thanks

Hello all,

I have successfully modded my P8Z77-V LX board with the help of your lovely forums, and I can get my Intel 600p NVMe drive to show up as a storage device.

However, I am trying to get an older M.2 that isn't NVMe to show up. Is this because I need another module in the bios? Or maybe the adapter I have only supports NVMe?

Thanks for any information!!

Probably adapter may only support NVME, post a link to the adapter or it's chipset and maybe someone can tell you for sure.
Can you see the M.2 in device manger at all, as a secondary drive?

May be it will be helpful to someone. I made APPLE 3rd gen SSD bootable with this module on the old GIGABYTE GA-H81M-S2PV Rev. 3 motherboard with AMI UEFI BIOS. Yes, Apple used Samsung SSDs with UAX controllers (SSUAX specified on it).