Forum - RE: Lost trim after upgrading to Z87

#16 | RE: Lost trim after upgrading to Z87 datum

Thu Aug 29, 2013 11:26 pm

Zitat von jeroompje im Beitrag #15
Does it have influence when running an uefi setup?

What do you mean?
The SataDriver version has a big influence on the Intel SATA RAID Controller, because it is its "Firmware", if you have installed the OS in "RAID" mode.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#17 | RE: Lost trim after upgrading to Z87 datum

Fri Aug 30, 2013 9:35 am

one can do a normal win 8 raid-0 install (efi) or an uefi install.
does the upgrade of the sata-driver in the raid orom have influence on both installations?

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#18 | RE: Lost trim after upgrading to Z87 datum

Fri Aug 30, 2013 10:15 am

Zitat von jeroompje im Beitrag #17
one can do a normal win 8 raid-0 install (efi) or an uefi install.
does the upgrade of the sata-driver in the raid orom have influence on both installations?

If you do a "LEGACY mode" (non-UEFI) Win8 installation, just the Intel RAID ROM will be used by the system, wheras the OS, which has been installed in "UEFI mode", only will use the BIOS module named SataDriver.
Both BIOS modules (Intel RAID ROM and Intel SataDriver) do not infuence each other, only one of them will work.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#19 | RE: Lost trim after upgrading to Z87 datum

Fri Aug 30, 2013 10:37 am (Last edited: Fri Aug 30, 2013 10:37 am)

so in my case with uefi-install, it is very wise to upgrade also the sata-driver.

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#20 | RE: Lost trim after upgrading to Z87 datum

Fri Aug 30, 2013 12:45 pm

Zitat von jeroompje im Beitrag #19
so in my case with uefi-install, it is very wise to upgrade also the sata-driver.

That is correct. You wouldn't even need to update the Intel RAID ROM as long as you will install your Operating Systems in UEFI mode.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#21 | RE: Lost trim after upgrading to Z87 datum

Fri Aug 30, 2013 12:46 pm

thanks; gonna try :)

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#22 | RE: Lost trim after upgrading to Z87 datum

Sat Aug 31, 2013 10:14 am (Last edited: Sat Aug 31, 2013 10:14 am)

i updated bios 0714 with latest raid orom, satadriver and gopdriver, but still no trim :(

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#23 | RE: Lost trim after upgrading to Z87 datum

Sat Aug 31, 2013 3:21 pm

Zitat von jeroompje im Beitrag #22
i updated bios 0714 with latest raid orom, satadriver and gopdriver, but still no trim :(

My opinion: Neither the Intel RAID ROM resp SataDriver nor the Intel RAID driver version, but the Sandforce Controller of your Corsair Force GT SSDs are responsable for the failure of the TRIM tests done with your Z87 RAID0 system.
The only question is, if they really don't let the TRIM commands into the SSDs or if the TRIM activity cannot be detected by the usual methods (TRIMCheck Tool or manual Hex Editor test).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#24 | RE: Lost trim after upgrading to Z87 datum

Sun Sep 01, 2013 11:21 am (Last edited: Sun Sep 01, 2013 11:22 am)

On my previous system trim worked with those same Sandforce drives!
(m4e-z; rst 12.x driver and orom; win 8)

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#25 | RE: Lost trim after upgrading to Z87 datum

Sun Sep 01, 2013 1:01 pm

Zitat von jeroompje im Beitrag #24
On my previous system trim worked with those same Sandforce drives!
(m4e-z; rst 12.x driver and orom; win 8)

My tip: Contact the ASUS, Intel and Corsair Support. One of these Companies should be able to solve your problem.
Maybe you need just an updated mainboard BIOS, a new RAID ROM/SataDriver module or a better Sandforce Controller Firmware.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#26 | RE: Lost trim after upgrading to Z87 datum

Mon Sep 02, 2013 1:47 pm

support tickets at Asus and Corsair have been made; Intel: don't have a good link

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#27 | RE: Lost trim after upgrading to Z87 datum

Mon Sep 02, 2013 5:02 pm

Zitat von jeroompje im Beitrag #26
Intel: don't have a good link

Here are some links:

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#28 | RE: Lost trim after upgrading to Z87 datum

Mon Sep 02, 2013 6:24 pm

Official reply from Asus:

Our R & D Department looked at this and they state that we can ensure the TRIM is enabled and should work.For any question about how TRIM works you should contact Microsoft.

It's bullshit but i leave it for now.

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#29 | RE: Lost trim after upgrading to Z87 datum

Thu Sep 05, 2013 12:27 am

i ordered a second Samsung 840 Pro 256Gb, so i can build a raid-0 of those ssd's...:)

cheers,
Jerome.

http://nl.hardware.info/usersystemen/198...ximus-6-formula

reply

#30 | RE: Lost trim after upgrading to Z87 datum

Thu Sep 05, 2013 12:51 am

Zitat von jeroompje im Beitrag #29
i ordered a second Samsung 840 Pro 256Gb, so i can build a raid-0 of those ssd's...:)

It will be interesting to see, if TRIM in RAID0 will work for you with these SSDs.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.