I will send you tonight or tomorrow; but I don't see a great difference in speed between last drivers.
My problem (speed cap at sata II) is still present but now my jumper ezbook work much better

I manage to enable AHCI, after enabling safe mode reboot, and activat ahci in bios, and restart normaly i check the Hardware ID of the controler and i get this:

PCI\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02
PCI\VEN_8086&DEV_2922&SUBSYS_B0051458
PCI\VEN_8086&DEV_2922&CC_010601
PCI\VEN_8086&DEV_2922&CC_0106

and


PCI\VEN_1095&DEV_3531&SUBSYS_33386388&REV_01
PCI\VEN_1095&DEV_3531&SUBSYS_33386388
PCI\VEN_1095&DEV_3531&CC_010601
PCI\VEN_1095&DEV_3531&CC_0106

I think this are from Intel, because i also have a Esata controller from gigabyte that use Jmicron that have this ID

PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02
PCI\VEN_197B&DEV_2363&SUBSYS_B0001458
PCI\VEN_197B&DEV_2363&CC_010185
PCI\VEN_197B&DEV_2363&CC_0101

The help i need from you is to know what drivers i can get for a futere clean install of Windows with my ID hardware. I try to install Intel RST drivers v11.2.0.1006 dated 05/30/2012 and they don´t install.

regards

My best configuration. Same speed but very stable[img]

Tks fernando.
The HDDS are in Intel Sata, I hace DVD-Rom in Jmicron (gygabyte esata)

I found strange the Silicon Image Controler, maybe Esate from gigabyte use that in sata mode and Jmicron on IDE mode.

But for my Intel ICHR9, hat drivers do you recomend for install now on windows 10, and if what drivers i can save that i can use in a future clean Instalation of windows 10 x64?, Because you said that

Zitat von Fernando im Beitrag #1230

---

Only in-box or WHQL certified F6 drivers are accepted by the Win10 Setup during the first part of the OS Installation.

---

@Fernando

I have downloaded the "Universal 64 bit Intel RST Software v13.1.0.1058.rar" file to try a newer driver version.

According to this thread, there should be a certificate in this download.
When I extract the files, I find two files:
RST_v64.msi
media1.cab
The media 1.cab does not contain the certificate.

Where do I find the certificate?

(This should be simple, but I fear I missed something somewhere. My apologies.)

@Fernando

Thanks again for the prompt and helpful reply.

Thank you for that clarification about drivers and software. May I suggest that you use those column heading in your recommendation table? Also, I think I now see that I didn't pay attention to the word "Universal".

I did a download from Station-Drivers of v 13.1.0.1058 yesterday. Is that the original Intel version?
Just to clarify, the download of v 13.1.0.1058 that I did contains all of the drivers, RST control panel, and RAID functionality that I will need in one file?
I thought that a second install needed to be done to get the RAID functionality. I understand that I build the RAID array in the BIOS?

Also, if I want the write-back-cashing feature, I need to install v11.2.0.1006 first and enable that. Is that correct?

Thank you very much for the instruction.
My apologies if I was off-topic.
I will reread the start post as you request.
Thank you for your time.

Regards,

Hello Dieter,
Great work here, to say the least.

I have a question for you, about an old motherboard based on the ICH9 (without R), namely the Abit IP35-E : there is a bios mod which enables the AHCI, but none of the modded drivers appear to work. In IDE mode the hardware ID's are DEV_2921 and DEV_2926. As soon as AHCI is switched in BIOS I get a blue screen (XP SP3). I tried Dev_2922 and DEV_2923 by Fernando but I guess those were ICH9R drivers modded to work with later versions of the Intel Software. (got blue screen with them as well)

Can you tell me which device should be selected from your modified drivers? Thanks a lot, Adrian

Hi and thank you for the quick answer.

That's not the problem, before changing from IDE to AHCI I tried to force first the Dev_2923 and after that I also tried the DEV_2922. Both gave me blue screen after rebooting and changing to AHCI.
In IDE mode the controllers are identified as Dev_2921 and Dev_2926. Perhaps Dev_2923 is not the corresponding AHCI id for this particular controller?