Thanks Fernando! I want to make a "universal" 2K/XP/2K3 WIM image with all AHCI/SATA/SCSI as possible (Intel, AMD, JMicron, VIA, etc), but i found much problems to finish, I will read all your topics about Mass Storage injection!, in XP/2K3/2K ISO without problems, only in sysprep image (When image starts a mini-setup, i get BSOD 0x07b) same using MassStorage linking a valid path to inf's files (unable to update registry error).

How is the performance compare with original Intel 15.x and inbox 15.44?

Sorry i think this is a double post.

I only recently installed a SSD in my EZbook 3 pro. The ssd was very slow until I use your ahci driver. But I suspect now it only work as SATA II (even if Mmy SSD is SATA 3)

is it normal?

I will send you my specification

Computer: Jumper EZbook
CPU: Intel Celeron N3450 (Apollo Lake, B0/B1) 1100 MHz (11.00x100.0) @ 2100 MHz (21.00x100.0)
Motherboard: Jumper P3132
BIOS: Jumper10x.P8.WP3132.NHNAUHL01, 12/05/2017
Chipset:
Memory: 6144 MBytes @ 800 MHz, ?-15-15-34
Graphics: Intel Apollo Lake SoC - Graphics and Display Controller (12 EU) [B1] [Intel] Intel HD Graphics Gen9-LP, 1024 MB

Drive: TS512GMTS430S, 500.1 GB, Serial ATA 6Gb/s @ 3Gb/s ---------------- SSD is SATA III

Sound: Intel Apollo Lake SoC - High Definition Audio Controller
Network: Intel Dual Band Wireless-AC 3165
OS: Microsoft Windows 10 Professional (x64) Build 18363.836 (1909/November 2019 Update)


Thanks

Thanks for the fast answer, Universal 64bit Intel RST(e) AHCI+RAID driver v15.9.8.1050 mod+signed

EZBOOK 3 PRO
This is my HardwareIDs:
PCI\VEN_8086&DEV_5AE3&SUBSYS_72708086&REV_0B
PCI\VEN_8086&DEV_5AE3&SUBSYS_72708086
PCI\VEN_8086&DEV_5AE3&CC_010601
PCI\VEN_8086&DEV_5AE3&CC_0106

SDD go much much better but don't go beyond 290 (reading)

Can you send me vi PM newer driver? I will be happy to test it.
I followed your instruction but for some reason my SSD continue to use only SATA II speed. I'm more then happy with it (with standard microsoft driver I have 1/10 of speed) but don't understend why it only work as a SATA II.
I will post my result:
I'm sure my SSD is SATA III (Transcend-512GB-MTS430S) and intel apollo lake n3450 is sata 3. So i don't understend. I tried to follow your instruction but can't install an appropriate Intel MEI driver version.

EDIT by Fernando: Benchmark results directly inserted and Amazon advertising removed (to save space)

I want to test on AHCI of my Motherboard ASUS H97M-Plus
I try with 14.x but the performance somehow quite bad(which also the last official supported version of 9 Series Chipset).
Bootup and Startup time quite long than 15.x Intel RST driver.

First of all i want to thank Fernando for all the hard work on intel Drivers, that make this a reference comunity when we have problems with Old intel drivers.

second i want the help with installing the drivers on my Windows 10 x64.

I have a GA-X48T-DQ6 (rev. 1.1) with a motherboard and QX9450 CPU that1 only suport windows 7 drivers.

I Had A BSOD that ruined my previous Win 10 instalation and i needed to install again. and i had 2 solutions:

1- Install Windows 7 x64 and update to windows 10, to get suport for ICH9 drivers.
2- Install windows 10 x64 in IDE, and after that use a reg mod that can install and enable AHCI after the instalation.

I made the the second choise, but i cant find the "moded" registry" solution to get AHCI enabled.

I found that you create moded drivers for old boards, and i want to ask for your help in one of 2 solutions:

1- The ideal one has to enable AHCI with the instalation of your moded drivers, i download Intel RST drivers v11.2.0.1006 dated 05/30/2012, bit not sure if that right ones, or even if i can install, and after change the bios to AHCI and this work.

A second option e to know if I start to reformat and instal again, i can use this drivers to use F6 in windows 10 x64 instalation, and if it works.

Tks again for your work.

@Fernando:
Tks Fernando for your quick reply

Maybe i didn´t express well my problem.

I really don´t want to install in IDE, but if i don´t choose that windows 10 don´t native support ahci in this board. I need to hit F6 key to load a compatible Sata driver. and the problem is that. There aren´t compatible sata drivers for windows 10.
Thats why all user ith x48t board from gygabyte, have to install w7 first and upgrade to Windows 10, because after instalation thare is a generic sata for ichr9 from microsoft.