Hi Fernando,

Today I upgraded from 1803 to 1809 build 17763.134 & sleep mode is not working. Perhaps when last on 1809 I did not check sleep mode...
If I tell the PC to sleep it pushes me to the login screen.

event viewer says:

Zitat

---

Event ID: 26
The description for Event ID 26 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\SystemRoot\System32\Drivers\iaStorAV.sys failed to load
The message resource is present but the message was not found in the message table

---

& also right behind it:

Zitat

---

Event ID: 45
The system could not sucessfully load the crash dump driver.

---

Since I'd just spent time working on this chipset problem iaStorAV.sys sounded familiar - thought I'd try a different driver.
This one you provided appears to be working well.

Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
Driver Provider:	Intel Corp
Driver Date:		7/9/2015
Driver Version:	13.2.8.1002
 

The PC now sleeps & also no latency issues.

Thank you

Hi Fernando,

Well I was having trouble getting the original one digitally signed. Using one of the .cat files in the 64bit Intel RSTe AHCI & RAID drivers v13.2.8.1002 WHQL did not help. Not quite sure what the signature is on the original one. Must have missed something in your tutorials. Sorry, I've never run RAID & before a couple weeks ago had not bothered with the storage drivers.
I'll go over your Tutorials this weekend & figure out what I'm doing wrong. Didn't want to go days without responding. Appreciate your assistance.

Hi Fernando,

Zitat von Fernando im Beitrag #1039

---

There is no need for doing that, because the original WHQL certified Intel RST drivers have already been digitally signed by Microsoft.

---

Zitat von Fernando im Beitrag #1039

---

What did you do with the related *.cat file? It doesn't make any sense to replace, to point onto or to look into any *.cat file, when you want to install any driver. The only important file for the installation procedure is the related *.inf file (nevertheless the *.cat and *.sys files have to be present as well).

---

From Intel's RST/RST(e) AHCI/RAID Drivers under Latest/best RST(e) drivers from the v13 platform.
Right, no *.cat file. The reason I was looking elsewhere for one to certify the signature. Just kinda stumbling around here.

btw - 11.2.0.1006 is doing well.

Thanks

that works? i have a problem with modded driver, when install windows 7, take error after loading driver

Zitat von Fernando im Beitrag #1043

---

@dogpark:
Thanks for your reply.
As written within the linked post, the original Intel RST drivers v13.44.0.1026 are the Win10 v1709 in-box Intel RAID drivers and cannot be used outside this OS or as AHCI driver. As soon as possible I will offer mod+signed variants of the v13.44.0.1026 drivers, which will support all Intel SATA Controllers from ICH7 up in AHCI and RAID mode.

---

Zitat

---

cannot be used with other Windows Operating Systems (due to the missing *.CAT files)

---

but I was having fun experimenting. Have working Windows 10 on the Dell Studio XPS once again & am grateful for that.

The other desktop has ASMedia 3.0 USB, headed over to your topic USB 3.0/3.1 Drivers (original and modded) later today. Thanks for the great forum.

According my usage and experience
I don't recommend ICH10R using V14 or higher version,It would end up with GSOD/BSOD with InAcessible Boot Devices error.
The last working driver for ICH10R was 13.xx Series.
Btw,Did you test the performance with 13.2.x and 13.44?
Which has higher speed and low latency?

@Fernando
with version 11.2 I have the problem during the installation, it does not load it with windows 7