Zitat von Lost_N_BIOS im Beitrag #1005

---

any way to uninstall AHCI driver from recovery console, or other method?

---

@Lost_N_BIOS:
I didn't even know, that ICH7 Southbridges have been built by Intel without AHCI support.

@FM:
Yes, I will offer today a mod+signed variant of the latest 64bit Intel RST driver, which belongs to the RST v16.7 development branch.

Zitat von FM im Beitrag #1014

---

Maybe it's possible for you to include VEN_8086&DEV_31E3 device in .INF. It's a June Canyon (Celeron Gemini Lake).

---

@aaa839:
You can test any of my mod+signed Intel AHCI/RAID drivers.
Another question is, whether the tested driver will properly work with your old system.

@FM:
Within the start post you can find now the requested mod+signed 64bit Intel RST driver v16.7.1.1012, which hopefully will support your on-board Intel SATA AHCI Controller.
Don't forget to report, whether the driver worked for you or not.

@all:
Update of the Start Post:
Changelog:

• new:
  • mod+signed 64bit Intel RST AHCI+RAID driver v16.5.5.1040 dated 09/03/2018, modified and digitally signed by me today (10/24//2018)
  • Universal 64bit Intel RST Software v16.5.5.1040 dated 09/11/2018
  • mod+signed 64bit Intel RST AHCI+RAID driver v16.7.1.1012 dated 08/24/2018, modified and digitally signed by me today (10/24//2018)
  • Universal 64bit Intel RST Software v16.7.1.1012 dated 08/29/2018

1. These packages are only usable with Win8, Win8.1 and Win10.
2. The 32bit variants of these drivers and Software Sets are not available.
3. Intel RST(e) drivers of the v15 and v16 platform have been designed and optimized by Intel just for the newest Intel Chipsets from 100-Series up.
   Due to the modification of the related INF files the above listed Intel RST drivers will be installable onto older Intel Chipset AHCI/RAID systems, but may not properly work. Users with an older Intel Chipset system should better take a driver, which belongs to the v12, v13 or v14 platform. I am not responsable for potential problems they may get after the installation of these newest mod+signed drivers. It is strongly recommended to set a "Restore Point" before starting with the driver installation!
4. If not already previously done, don't forget to import the Win-RAID CA Certificate, before you try to get any of my mod+signed drivers installed. The Certificate itself and the related CMD file are attached to all my mod+signed driverpacks.
5. Due to new security features of Win10 you may have to execute the CMD file from within the Command Prompt or Windows PowerShell (both options have to be run as Admin).
6. >Here< you can get additional informations about "modded" drivers and >here< about how to get them properly installed.