Forum - RE: Modded Intel AHCI and RAID Drivers (digitally signed)

#826 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Sat Dec 16, 2017 12:10 pm

@789:
It is not enough to load or integrate the correct Intel AHCI driver. Additionally you have to choose from the list of the various compatible Intel SATA Controllers just and exactly the one, which matches 100% your specific on-board Intel SATA AHCI Controller model. Otherwise you will get a STOP 0x0000007B BSOD error.

Zitat von 789 im Beitrag #825
Is there an iaStor.sys file, that I may change BIOS to "AHCI" ?

Yes, you can use the iaStor.sys file v11.2.0.1006, which is within the package named "Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando".

You can enhance the chances to get it working by doing the following:

It is very important, that you know the exact DeviceID (DEV_XXXX) of your on-board Intel SATA AHCI Controller while running a modern Windows OS (from Win7 up) in AHCI mode. This requires, that you have set the Intel SATA Controller within the BIOS to "AHCI" before.
Then run the Device Manager, expand the "IDE ATA/ATAPI Controllers" section, right-click onto the listed Intel SATA AHCI Controller (may have another name) and choose the options "Properties" > "Details" > "Property" > "HardwareIDs".
The safest way to get Windows XP running in AHCI mode is to do a fresh XP installation by using a "clean" (= untouched) Windows XP SP3 image as source, but with integrated correct Intel SATA AHCI driver according to >this< guide.

Good luck!

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#827 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Sun Dec 17, 2017 12:30 am

Intel 8 Series 4 port Serial ATA storage controller 8C01
driver details atapi.sys, pciide.sys, pciidex.sys
"could not find a better match for your hardware than the software you currently have installed"

It will not accept any iaStor.sys

reply

#828 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Sun Dec 17, 2017 1:10 am

@789:
As long as your on-board Intel SATA Controller is running in IDE mode, you cannot install any Intel RST driver. They only support your on-board Intel SATA Controller, if it is running in AHCI or RAID mode.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#829 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Sun Dec 17, 2017 1:16 am

Thank you. So one day I have to make myself a modified installation CD.

reply

#830 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Tue Dec 19, 2017 2:37 am

15.8.2.1009 is available (9/15/2017)

reply

#831 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Tue Dec 19, 2017 11:22 am

@InstantAli3n:
Welcome to the Win-RAID Forum!

Zitat von InstantAli3n im Beitrag #830
15.8.2.1009 is available (9/15/2017)

What does that mean? Do you want to get mod+signed variants of this specificic driver version?
Until now I only have access to the 64bit driver v15.8.2.1009 WHQL (it is listed >here<).
Do you have a link to the 32bit driver and the complete Drivers & Software Set?

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#832 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Wed Dec 20, 2017 10:04 pm

I saw 15.8.2.1009 dated 9/15/2017 when I was updating with Snappy driver installer and I assumed since the latest on this page was v15.8.1.1007 dated 08/07/2017 that you didn't know about it, so I was trying to notify you that a newer version was available under the assumption that you would know where to look to get the installer. I guess it doesn't work like that for the modded drivers! My mistake!

reply

#833 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Wed Dec 20, 2017 10:29 pm

@InstantAli3n:
Thanks for the reply.
I generally modify only such Intel RST/RSTe drivers, which are completely available (32/64bit and complete Set).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#834 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Thu Dec 21, 2017 12:05 pm (Last edited: Thu Dec 21, 2017 12:06 pm)

@Fernando Please could you add support for my device ID please?

Chipset: G41
S\B: 82801GB (ICH7\R)

Intel(R) ICH7 Family Ultra ATA Storage Controllers - 27DF
PCI\VEN_8086&DEV_27DF&SUBSYS_0DC1105B&REV_01

Intel(R) N10/ICH7 Family Serial ATA Storage Controller - 27C0
PCI\VEN_8086&DEV_27C0&SUBSYS_0DC1105B&REV_01

What would be the best version and software to use for this older chipset in Windows 10-64 1709?

Thankyou for your advice and support
Tech

reply

#835 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Thu Dec 21, 2017 12:34 pm

@techeads:
Both Controllers are running in IDE mode and can only be managed by the in-box MS IDE driver named PCIIDE.SYS.
An addition of the related HardwareIDs into the INF file of my mod+signed Intel RST/RST(e) drivers would have no effect, because Intel's RST/RST(e) drivers only support Intel SATA Controllers, which are running in AHCI or RAID mode. So there is nothing to modify for your "Intel(R) ICH7 Family Ultra ATA Storage Controller" resp. "Intel(R) Family Serial ATA Storage Controller".

Zitat von techeads im Beitrag #834
What would be the best version and software to use for this older chipset in Windows 10-64 1709?

As long as your on-board Intel SATA Controllers are running in IDE mode (and not switched within the BIOS to "AHCI" or "RAID"), the only usable driver is the Win10 v1709 in-box MS IDE driver named PCIIDE.SYS.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#836 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Thu Dec 21, 2017 12:38 pm

Kind of realised that just now going to have a look in bios to change it

reply

#837 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Thu Dec 21, 2017 12:46 pm

Zitat von techeads im Beitrag #836
Kind of realised that just now going to have a look in bios to change it

After having done that, you may not be able to boot into the OS. If you want to change the SATA mode, you should do a fresh OS install (after having switched the SATA mode within the BIOS).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#838 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Thu Dec 21, 2017 12:54 pm (Last edited: Thu Dec 21, 2017 4:43 pm)

Hi Fernando, just changed it in the bios to SATA only
only shows the Sata channel now in device manager as Intel(R) N10/ICH7 Family Serial ATA Storage Controller - 27C0
PCI\VEN_8086&DEV_27C0&SUBSYS_0DC1105B&REV_01
windows booted fine since i made the change.

anyway, have you got a driver and software package that will support ICH7R just something a lot newer than 9.1.9.1005 from 25/07/2013?
Apparently it's a Series 4 shown in system as Intel(R) 4 Series Chipset same as above.

Thankyou for your help

reply

#839 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Thu Dec 21, 2017 5:02 pm

Zitat von techeads im Beitrag #838
have you got a driver and software package that will support ICH7R just something a lot newer than 9.1.9.1005 from 25/07/2013?

The related Intel Chipset Device "driver" named ich78ide.inf v9.1.9.1005 is not a real driver (that are *.SYS files), but a simple text file. It contains just the information, that the device with the DeviceID DEV_27C0
a) doesn't need any driver and
b) should be named "Intel(R) N10/ICH7 Family Serial ATA Storage Controller - 27C0".
Newer INF files for your old mainboard are not available and wouldn't bring you any benefit.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#840 | RE: Modded Intel AHCI and RAID Drivers (digitally signed) datum

Fri Dec 22, 2017 7:33 am

here's official link to 15.9.0.1015 RST https://downloadcenter.intel.com/downloa...-?product=35125 can you make modded driver for Z87 Chipset, also there's 16.0.0.1055 Beta http://www.station-drivers.com/index.php...5&lang=fr#15744 i use your modded Intel Chipset Device Software Version 10.1.17464.8052 WHQL and there's no more 10.1.1.38 drivers automatic installation from windows update with the correct date, now i use older 14.8.16.1063 RST for evo 840 250gb on Z87-GD65 motherboard, it's working fine on windows 10 1709 but i want to try newer one with official RS3 support

My current System:
MB: MSI Z87-GD65 , CPU: Intel Core i7 4770@3.9GHZ, Disk Drives: samsung evo840 250gb SSD + 2X1TB HDD, Graphics: MSI N780 TF 3GD5/OC, OS: Win10 ent x64

reply

Please enter a reason for warning.