Finally your modded drivers went smoothly to and they are there:

Asmedia seems like stopped provide any support... and drivers, or This I had seen before on ASMEDIA web was different to TW website... there is so much mess around in net, my Design Architect heart is bleeding because of this...


https://scr.hu/4dY9Wd

but this subject are so time costly, now i will be migrating my matrix to new matrix 3 time speedier and 2 times bigger .. but I hope this process is as "easy" as in Adaptec SCSI ... LOL

Fernando. I just wanted to say thank you.

I do not create accounts on many forums or often participate, but this custom AHCI driver for the intel 8 series chipset for XP that I just downloaded amd installed from you,,, It worked like a charm and I really thought my project was going to fail. You are great man.

Here is my story.

Im selling a computer, with which I told a customer I could triple boot for him xp, 7 and 10, on an HP Elitebook 810 G2 Revolve Tablet PC. In addition, I would be straight cloning the XP partition for him, so it would be exactly like it was on his old desktop junk PC. I have done this before on earlier chipsets, no problem, and thought this would be similar.

The way I do it is pretty simple. I install 10, and 7 separately on different HDDs, and then with the working 10 HDD installed, I use a pre boot program from paragon to copy the 7 partition behind the 10 one. That always goes through fine. I then take his XP HDD and copy that partition behind the 7. Now I have one HDD (In MBR for XP compatibility) with an MBR partition, 10 partition, 7 partition, and XP partition (4 Max for MBR!)

I boot into Windows 10 and run easy BCD which helps me correct any boot problems.

If I ever run into driver problems, I again use the Paragon Recovery Tool preboot software, to replace and inject appropriate drivers. This usually works without a hitch and loads up copied partitions from other computers with generic drivers that are compatible with whatever PC I am using. I did not consider this newer chipset as being a potential problem. The tool would have nothing to do with this Series 8 AHCI driver for XP.

But you fixed it man, I have been searching for drivers and as you pointed out, they dont make xp ahci drivers for this 8 series chipset. I downloaded yours, used my tool to inject it and I finally got a boot, problem solved.

BTW I did not read this entire forum post, it seemed to be pretty lengthy, and I got the info and goods I needed from your intro after a google search.

I do want to recommend the paragon tool to you for injecting drivers with its P2P feature (run this tool, you will see what Im referring to.) Anyways, it allows me to fix numerous problems preboot and is otherwise a basic HDD manager.

Thanks so much for your help, I was becoming very concerned about completing this task, and now I can, even if just barely on time.

You are great, I hope someone is paying you well!

Just wanted to report, on my system in sig i tried the v12.9.4.1000 and v13.1.0.1058 (drivers only, no software), both work well but the v13 benchmark slightly faster so i will stick with those.

Using these drivers have solved the event viewer errors with my ssd on MS AHCI i would always get: "A TCG Command has returned an error." Something to do with my sdd and it's built in encryption ability.
Also benchmarks overall slighty better then built in MS AHCI drivers.

Great job, my computer has been running great with these for days now.

Hi friend!

I'm trying to gownload this drivers Modded+signed Intel RST drivers v11.2.0.1006, but when I finishing download and try to unpack it from RAR archive it's says that archive is corrupted and I can't unpack it. I tried download from both sources and from different computers but result the same.

Thank you very much!!! It works!

Hi to all!

I want to tell about my experience. I have: H110M DGS R3.0 motherboard. And trying install Win XP on this motherboard. Finaly I did it. but not with flash drive or CD-Rom. I used second hard drive. made it bootable(I have external cabby with usb interface) and then connect via SATA to motherboard. And when I'm booting from that secon drive I'm pressing F5, F6, F7 and then chooce Computer that system offer me.
After windiws is finish instalation it's have a lot of missing drivers.
I found some drivers and install them but others can't find:
*PNP0700
PCI\VEN_8086&DEV_A12F&SUBSYS_A12F1849&REV_31
PCI\VEN_8086&DEV_1902&SUBSYS_19021849&REV_06
HDAUDIO\FUNC_01&VEN_8086&DEV_2809&SUBSYS_80860101&REV_1000
PCI\VEN_8086&DEV_A13A&SUBSYS_A13A1849&REV_31

Hello, Fernando,

Zitat von Fernando

---

Modded+signed Intel RST drivers v11.2.0.1006 (dated 05/30/2012, re-modded and signed at 07/26/2017):
>Universal 32bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando (latest variant)< (>MIRROR<)
>Universal 64bit Intel RST AHCI+RAID driver v11.2.0.1006 mod+signed by Fernando (latest variant)< (>MIRROR<)
>Universal Intel RST Drivers+Software Set v11.2.0.1006 mod+signed by Fernando (latest variant)<(>MIRROR<)

---

I can't open the first package that is also intended for the 200 series. He always tells me that the archive is unknown or damaged.
Can you fix this?
Thanks in advance!

Regards
DLG3000

EDIT by Fernando: Unneeded parts of the quoted post removed (to save space)

Hello Fernando,

will you mod 15.8.1.1007 for us? Or did I miss something in this thread?

Muh!
Regards