Hi.
Would I possibly gain anything if I install some of the more recent modded drivers on a, for example, 7-series chipset based PC? Or would something bug out? I mean, does relevant driver code exist for those controllers in the newer drivers?

For 7-series chipset use official 13.1.0.1058 WHQL - old driver is better in my case: Modded Intel AHCI and RAID Drivers (digitally signed) (43)

hi Fernando, is it safe to use the v15.0.2.1044 modded for H97 chipset? i read that only 100 series is supported.

thanks. i read in your guide that v13.2.4.1000 is best for 9 series so i might stick with that. i did not yet notice much difference in benchmarking my SSD with v14.8.0.1412 that came with Asus. was wondering earlier if v15 might improve performance slightly.

for the 4kQ32 score does seem slighly low (850 evo 250GB, should be 300+)? not sure what more i can do, it's already on intel SATA6 port of my Asus H97.

Zitat von Fernando im Beitrag #666

---

Zitat von svefn im Beitrag #665

---

is it safe to use the v15.0.2.1044 modded for H97 chipset?

---

The installation is "safe" (nothing will be bricked), but not recommended. You will be disappointed about the performance and maybe by the missing stability.

---

Hi,
First of all thanks for doing the effort :)
I have a problem in installing the Intel RST Software. Tried v12.9.4.1000 and v13.2.4.1000 resulting the same, they dissapear after asking for administration permission. Though I noticed there's msiexec.exe running on task manager, but that's all. It won't show up. I've installed the driver beforehand and the signature stuff.

EDIT : Using windows 10. Intel 6 series

EDIT 2 : nvm. I rolled back to v12 and use troubleshoot compability, and it's all good :D

Yeah I didn't realized that because I was using v14 from Intel website and it installed without problem so I thought v14 was the native version haha but it's all good tho

Hi

My issue is
Gigabyte GA-965P-DS3P
ICH9R running RAID 5 on 6 320GB HDD
Windows10 x64

It installs fine to the RAID set up in the BIOS. It initialises on the WIN10 setup CD. I just let it sit on the "do you want to install" screen until the RAID is healthy.

In a test, when it degrades Pos 0 it rebuilds in the windows setup CD. However after a second reboot it went to "offline members" so I pulled drive 0 and rebuilt it. I think I need the RST software to stop this.

The latest Intel RST software does not recognise the RAID and the opsys does not boot after install. Then I found your work after realising ICH9R drivers are not supported in Windows 10 x64 despite a very unclear Intel website.

I think your post says use for the older chipsets
Modded+signed Intel RST drivers v11.2.0.1006 (dated 05/30/2012, re-modded and signed at 10/26/2015)

Thanks

I installed mod Intel RST driver v11.2.0.1006 and it rebooted fine. I added the Win10x64 .NET 3.5 which downloaded software from the net through the Win10 control panel.

The control centre runs but the RST GUI reports trying to connect to the service. In services I can not see an IAStore service.

I installed Modded+signed Intel MSM Drivers v8.9.8.1005 (dated 04/05/2010, freshly digitally signed at 10/26/2015, latest Intel MSM drivers)

It works fine.

Is there sense to go to a later driver?

Thanks