Zitat von Fernando im Beitrag #555

---

Zitat von ClintE im Beitrag #554

---

Is the certificate installation required on system that is not running raid (just AHCI)?

---

The import of the Digital Signature Certificate is only required once (unless you are doing a fresh OS installation), but you have to install a mod+signed driver variant, if you want to run any Intel RST AHCI driver of the v12, v13 or v14 series.

---

Hi, I have ASUS P5KC rev 1.03G with Jmicron extra controller. BIOS version is 02.58.

I would like to enable AHCI (in order to use an SSD) and read there's a lot of people who flashed a modded BIOS for that. I have been browsing around but I am not sure I should flash p5kc-1203_slic-ahci_v2.rom or another one.

Can you give me a hint?

Thanks a lot!

Zitat von Fernando im Beitrag #558

---

@ MarcoPau:
Welcome at Win-RAID Forum!
Where did you read that?
What has your request to do with the topic of this thread?
Which AHCI Controller do you want to enable (the Intel or the JMicron one)?
If it should be the on-board Intel SATA Controller, I recommend to check, whether the latest BIOS for your mainboard contains the latest Intel AHCI ROM v1.20E. If not, I recommend to update the related Intel AHCI ROM.

---

No, I have no option for Ahci, that's why I put myself into this search and found out there's people who mods bios's in order to activate Ahci.

All I actually want to make sure is to download the right modded bios for my mobo but I understand it's none of your business.

You basically hack with the drivers one has to install under Windows?

Thanks again!

Got it. Thanks for making things clearer. I am really not familiar with these issues since I haven't noticed the AHCI thing before.

hello friends
i'm a beaten man, even with your help on a prior install [for which I thank you again].
I have a hp Pro 6200 which has apparently Q65 chipset.
I installed the last BIOS for the system.
The BIOS is from AMI, not HP, per se.

In setup, unlike other HP systems of this vintage, there is no RAID option for the Storage Controller SATA mode. it is the typical IDE or AHCI. nothing else there.
In Advanced Settings, however, there is the option to enable or disable RAID OPTION ROM Download - which is Enabled. [which caused me to wonder... "how do I trigger that download?"].
I have seen generic references here and elsewhere to "running F6" or the necessity to 'run F6' before installing RST, but I have no direct instructions as to how to do that on this system or whether it is even possible so I'm lost.

Am I on the right thread/topic, and should I install the RST/RAID drivers you show in Post 1, Section I? and is the third set - "drivers & Software" additive, or "instead of" those listed above your entry?

I am not at all confident that this system as yet has the best chipset drivers installed. HP's website is very difficult for this system, including a disclaimer that 'this portal is not" any longer the place to get the latest updates, but instead of a link, they provide a EMAIL address ..... I picked the last chipset driver download listed for the system and installed.

the goal is to run RAID 1 mirroring on a pair of matched samsung/seagate 2tb drives. I can do that under Windows 10 or Windows 7, whatever works better. all RAID things being equal I prefer 10 at this point. The system will be a server for a small lan, just backing up images and files and streaming some media.

thank you for helping the whole community.

hwinfo included

I am a Chinese，Very much like XP,Because he has 60Hz （Vista is also 60Hz）,After the system is 59.94Hz
Now Intel out of the 100 series chipset
e.g. q170 q150 b150 h110 h170 z170
but not xp's ahci drive
Have a modified version of the drive？
plug nvidia gtx 960 4G DDR5
He has the last XP drive
sound card Can insert a piece of
The most important is the AHCI XP disk controller
F6
Worship you very much
You are the gospel for all XP users.
I'm not a stretch hand party
If you are free, feel good, look at the 100 series chipset for xp

English is not good, this is the translation of Google
thanks you,I wish you good health and happiness.

bye bye

Zitat von Fernando im Beitrag #567

---

Zitat von Majestic12 im Beitrag #550

---

Is it possible to mod the Intel RSTe drivers (v4.3) because they are the only drivers newer than RST 13/14 series without that annoying APM problem using Samsung F3 HDDs?

---

You can find the download links below:
Note: I have included the HardwareIDs of all known Intel SATA AHCI and RAID Controllers from ICH7R up, but this does not automaticly mean, that they will properly work with all of them.
Any feedback is much appreciated!

---