@PH47MAN were you ever able to get this done with a new chip and copying from it? I have the same chip and this same Intel board but after a bios update attempt I am now stuck in code 28 .. I let it run for over 24 hours hoping it was just working on initializing the memory but finally gave up. So now I was hoping to use this method to flash the bios.

@PH47MAN you can disregard. I am not sure how but I was able to get the BIOS restored. I decided to put all the RAM back in to take a picture in preparation to list the RAM and CPU for sale :) then decided to give it one more try. I reformatted my USB drive. Copied only the BH0100.BIO file to it. Removed the BIOS jumper from the motherboard inserted the USB drive and connected PSU with nothing else connected but CPU/RAM/PSU/Flash Drive and I noticed this time the error code was moving from 04/15/31 then the flash drive would show activity and I just left it that way for about 15 minutes while I took a few pictures for the future sale. After I turned it off I figured I would move the jumper back to normal mode and got the E6 error code for BIOS .. well I connected HDMI to monitor and put a keyboard on it and rebooted and BIOS 100 (Visual BIOS) launched much to my surprise. Set the clock and reinstalled everything into the case and booted up with no issues and now the PCI 3.0 slots are working!

So long story .. I got a new MSI motherboard, CPU and RAM being delivered Tuesday HAHAHA... But if anyone needs this BH0100.BIO file, I have it and confirmed it works even though it at first did not. I also got it from the Intel forum thread where someone helping another user had shared it.

@elektron @Lost_N_BIOS @noInk

hello there, new user here, i got the exact same problem that @elektron had, i updated my nuc NUC6i3SYH with the latest bios on 0073 downloadcenter.intel.com/it/download/29914/Aggiornamento-del-BIOS-SYSKLi-35-86-A-?product=89189 that completly bricked the nuc.. it flashed once but the following reboot it displayed some error A7 blabla, on intel site was explained that it needed to recovered using the jumper method, done that and got the error on during the flash that resulted in a fan spinning state without blue led turning on.

intel ofc did ignore my request for help (out of warranty and no paid service possible).

i'm trying to recover it somehow, on the release notes of the 0073 bios version downloadmirror.intel.com/29914/eng/SY_0073_ReleaseNotes.pdf shows that ME firmware version is 11.8.79.3722, following the guide with ME Analyzer shows that an unidentifiable ME is found so is probably really bad, using the guide for a Clean Dumped Guide step D4 .6 trying to use Flash Image Tool for the (CS)ME 11 gives error reading the dump so i can't really proceed with the guide..

any hint for what i can do about this? thanks for even reading this, @Lost_N_BIOS any chance it can be saved?


EDIT by Fernando: Unneeded quoted posts replaced by directly addressing to their authors (to save space)

oh well i forgot to attach my dump, sorry

ok nevermind, i figured out myself, i fixed the ME Region with a downgraded version of ME version using UEFITools so that FIT could open the bin, then i fixed in FIT using the correct ME version RGN, flashed and it booted correctly.

@elektron if you need your bios fixed aswell here it is, i'm confident that it will work for you too.

@MeatWar I was wondering if you had the latest bios for DZ77BH-55k board still available- BHZ7710H.86A.0100.2013.0517.0942? I recently got one of these motherboards for free, but the bios on it is from 2012 and its not playing nice with my GPU among other hardware. It's a shame that Intel has decided not to make these files available anymore and so far this is the only place I've seen where anyone has said they have the file available

@scarecrow_182000

Notes and Bios file

How can I modify the BIOS of my Intel DG45ID to allow overclocking? I don't know what BIOS Intel uses. I have done it before on a MSi motherboard using AMIBCP.

Guys, I created a login on this forum only to say a big thanks to you! I had a bricked NUC6i5SYH after a failed bios update. I successfully flashed the bios chip using a raspberry pi. I used the bios file supplied by @r88t in a previous post of this thread (#411). After that I successfully updated to the latest bios version using the normal update method.

Is it a problem that I directly flashed the version as supplied in the previous post? I have not adjusted it with the specifics of my NUC (e.g. mac address)...

Can you share your bin files here for dq77mk. I can’t buy them via paypal from my country, because paypall is forbidden. I have also corrupted bios file.

@r88t: @mr_blond18:
I have the same problem, can you tell me how to solve it? Thanks, my english is not good

Zitat von mr_blond18 im Beitrag #415

---

Guys, I created a login on this forum only to say a big thanks to you! I had a bricked NUC6i5SYH after a failed bios update. I successfully flashed the bios chip using a raspberry pi. I used the bios file supplied by @r88t in a previous post of this thread (#411). After that I successfully updated to the latest bios version using the normal update method.

Is it a problem that I directly flashed the version as supplied in the previous post? I have not adjusted it with the specifics of my NUC (e.g. mac address)...

---