Zitat von fs-esprimo im Beitrag #75

---

As I told you with MCommander you will be able to activate/deactivate KVM and user consent and check the settings.
Have a look.

---

If you are on Linux you can try to install MeshCentral 2 as a server on a computer without AMT.
Then you can manage and set all AMT computers accessing that server from any computer with or without AMT.
I am using that on Linux and it is working great, print screen it is taken from a Linux comp that access MeshCentral 2
http://www.meshcommander.com/meshcentral2

I will give all this a go and will be able to confirm after i actually try it. I'm away for a short while right now, but I'm a bit stumped by what you guys are suggesting: Are you saying that even though the KVM is enabled in MEBx and even though the IP is not listening on port 5900 (but *is* listening on port 16992 and shows the AMT options), there is some sort of a hidden way to still enable KVM which would then accept VNC connections on port 5900, which requires installing 3rd party tools just to enable KVM on port 5900?

I am on Linux and can access a few machine son that network remotely. Can MeshCentral do the same things as MeshCommander (enable KVM, etc)?

Is it possible that my unit simply does not have KVM?

KVM it is present from AMT 6 up to latest.

If I remember correct you need to enable also legacy redirection ports to be able to connect on 5900 and for that you need MeshCommander or MDTK.
Or the hard way is to read the documentation for AMT SDK and make your own program that send commands to AMT.

MeshCentral 2 it is a server solution to manage computers and yes accessing MC2 server via browser you can do almost all like MeshCommander.

You gotta be kidding me ... the option "Legacy port redirection" is the only one that I left _disabled_ in MEBx *facepalm*. It was there!

// how nice of Intel for not allowing to enable "legacy port redirection" from the standard AMT web interface

By default port 5900 it is disabled because if used by AMT will disable access to sw that use that port.

have a look at some doc:
https://software.intel.com/sites/managea...bilityports.htm
https://software.intel.com/sites/managea...ithport5900.htm
https://software.intel.com/en-us/blogs/2...eshooting-tips/
http://www.thomas-krenn.com/en/wiki/Inte...ment_Technology
https://www.scivision.co/intel-amt-vpro-...nc-viewer-plus/

I just got MeshCommander 0.5.6 up and running. See attached :). I enabled those two boxes and now I'm a happy bunny. I didn't find an option in MeshCommander to enable the legacy redirection ports (5900) for standard VNC clients - should there be one? t would allow me to connect more easily from my mac and linux boxes.

Many, many thanks to both of you!

Mesh Commander seem to not have all legacy options.
I think you have to try Manageability Commander Tool or from Intel AMT Software Development SDK - KVM Console; unfortunately you will need a windows OS.

https://www.thomas-krenn.com/en/wiki/Int...ment_Technology
https://www.scivision.co/intel-amt-vpro-...nc-viewer-plus/

Is there any option to enable RAID, as I know it was also disabled by dell . Thanks.

Wow, I've read through this whole thread and tried all the of the posted mods and it still doesn't seem to want to enable AMT on my dell Optiplex 7010 i5. My cover says ME LOCKOUT, not just ME disabled. Is it possible that there is no way to defeat this? I have attached the output from fptw64. Appreciate any help.

My dump is here: https://drive.google.com/open?id=1MzK48W...9VNjy3Fl_gnxs1s

@plutomaniac

Sorry for the lack of details! I have an i5 3470S. I did not take any dumps before attempting the flashes so what you're seeing is, in fact, after my attempts. I followed instructions given to previous users who have the same model Dell. I've tried flashing from DOS with fpt and within windows with fptw64. I am using the jumper on the motherboard. I'm at Dell bios A25, though I've also tried downgrading to previous version to see if it helps. Also the same steps, flash with jumper, shutdown, put jumper back, issue -greset command... but nothing seems to work.

Will try and follow up tomorrow! Thanks so much...