Hi im new, i have the motherboard 990fxa-ud3 v4.0 from gigabyte. The latest bios update is 2015/05/28 , Update CPU AGESA code, but the microcode version is 06000822.

I need a utility to flash the new microcode 06000832, somebody can help me?

Also i want to know if it's possible to disable NRAC blocking (x87 instruction) from the motherboard bios, like the bulldozer conditioner patch from the Stilt.

I DID IT, i downloaded 832 microcode and the latest version of my bios with 822, i used winhex , searched for the string comparing to 822 microcode, and replaced all the microcode. Then used the UBU in order to update all the other modules, then saved the new bios, updated.


Thanks to all. From Argentina.-|addpics|cv-1-c965.png|/addpics|

hi.@Modfreakz

2.78 This is the finding of.

* Microcode has been correctly recognized.

* Exchanged AGESADxeDriver has not been able to get the memory information.

* As of contents # 7 @ lordkag have pointed out, only the exchange of AGESADxeDriver alone, I believe that the problem comes into association with other files.

These problems, by the OEM of the BIOS, I believe because that specifies the data address that references or GUID associated with the other.

In the past I, when it was attempted to exchange of AGESADxeDriver, because was the same result as this time.

I, for even surgery to know how these files are any way related? It does not have even material, chose to become with your subject.

can you fix motherbord ？

Ex42.77BIOS is moving is very stable.
Modfreakz Thanks to the great work!

AGESADxeDriver which it has been replaced by the 2.78 also, as a result of investigation by various and comparison, we found that it is running correctly.
However, summary display of the portion of memory in the Setup menu of UEFI, in order to address that you want to see changed? It seems to become unreadable.

The image is another thing, but I have covered a range of point out a problem with the display.

Zitat von powerrush im Beitrag #17

---

I DID IT, i downloaded 832 microcode and the latest version of my bios with 822, i used winhex , searched for the string comparing to 822 microcode, and replaced all the microcode. Then used the UBU in order to update all the other modules, then saved the new bios, updated.


Thanks to all. From Argentina.-|addpics|cv-1-c965.png|/addpics|

---

I sucesfull update AGESA OrochiPI v1.5.0.5 to 1.5.0.6 motherboard ga 990xa ud3 rev 1.x ,witch latest amd microcode

Zitat von regit im Beitrag #23

---

I sucesfull update AGESA OrochiPI v1.5.0.5 to 1.5.0.6 motherboard ga 990xa ud3 rev 1.x ,witch latest amd microcode

---

Zitat von kilyan im Beitrag #24

---

Zitat von regit im Beitrag #23

---

I sucesfull update AGESA OrochiPI v1.5.0.5 to 1.5.0.6 motherboard ga 990xa ud3 rev 1.x ,witch latest amd microcode

---

can you tell me how to do it step by step pls?

---

Zitat von regit im Beitrag #25

---

Zitat von kilyan im Beitrag #24

---

Zitat von regit im Beitrag #23

---

I sucesfull update AGESA OrochiPI v1.5.0.5 to 1.5.0.6 motherboard ga 990xa ud3 rev 1.x ,witch latest amd microcode

---

can you tell me how to do it step by step pls?

---

Your bios is ami apito v i can say you only how update microcode.
Open bios file in hex editor search old code and replace with new, next save and rebulid in UEFI TOOL
For AGESA OrochiPI 1.5.0.6 i can t help you because your bios is AMI apito v, in AWARD it s easy .

Edit i see you have in bios AGESA OrochiPI 1.5.0.2 so in free time i will try use 1.5.0.5 from other gigabyte motherboard, it should work.

---

yee my mistake but i will try tu update 1.5.0.5 use from other gigabyte uefi bios.

i tried to search the code i see actually 6000822 and also with 06000822, but hex editor can't find it. Mybe i didn't understand what to search -.-

Load bios to win hex press ctr alt x write in box 132006 press ok.
More here

Zitat von regit im Beitrag #29

---

Load bios to win hex press ctr alt x write in box 132006 press ok.
More here

---